Ncam 10.1 compiled and patched by READ

There are 22 replies in this Thread which was already clicked 7,114 times. The last Post () by achintha.

    Ncam 10.1 compiled and patched READ


    Code
    -[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices, 
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written, 
so it doesn't care for the order of descriptors inside the CA PMT message)


    Download link


    Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)


    NCam-Images-OSDreambox-DEB (All ARM devices deb install file)


    *************

    Here are Only Bin file ..


    (build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

    (build-sh4 (Golden Media-Galaxy innovations-Amiko


    (cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT


    (aarch64-ARM (VU+4K Duo4K + osmio4k


    (build-x86-Linux-pc (32bit-i686


    (build-x86-Linux-pc (64bit


    (build-mips (Tiviar plus and similar

    (build-mipszrouter (Routers Mipsel DD-WRT

  • master G

    Added the Label Unofficial NCam

    With me on ubuntu 18.10 64bit both file 32bit and 64bit working as log shown below


    ncam.x86-10.1 (32bit)



    ncam.x86_64-10.1 (64bit)

    Maybe you need some file missing ..

    Should be to put here output of ncam from terminal

    Quote from Golden Man
    Quote from kommer
    Quote from Golden Man

    Hello my friend. This version can not run the constant.cw file.

    Works well. Check in reader the constant.cw location.

    I checked out my friend and transferred the file to the correct place.Works well with version 10.

    location is usr/keys.

    I moved the file to etc/tuxbox/config and use reader like this:


    [reader]


    label = myemulator


    protocol = constcw


    device = /etc/tuxbox/config/constant.cw


    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010


    ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000


    group = 1

    What is your box?

    My box is vu zero 4k

    Vu Uno 4k

    Thank you dear friend. I did the changes you did, but did not work. When I transferred the bin version 10, I was done.

    I have two boxes, a Zgemma H3 and Vu+ Duo 4K. On Vu Ncam 10.1 clears all cahnnels faster than Oscam. But on Zgemma clearing is too slow (three to four seconds for most channels) and some channels can not clear. I test both boxes with same servers, five lines total. Of course there should be some speed differences between two boxes because of hardware. But I noticed something which I want to ask: When I use Oscam (11.517) all five servers are connected and clearing is done by one of them. But with Ncam just one server is connected and it does not matter which place is it written on ncam.server. Is this a Ncam issue regarded Zgemma? Because with same ncam.server file on Vu all five are connected.


    Here is my ncam.server configuration. Is there something wrong or missing?


    [reader]

    label = server1

    protocol = cccam

    device = satx.elsa12.com, xxxxx

    user = xxxx

    password = xxxx

    keepalive = 1

    ccckeepalive = 1

    disablecrccws_only_for = 0500:032830,030B00,042820;1811:003311,003315;1819:00006D

    group = 1

    emmcache = 1,1,3,1

    dropbadcws = 1

    cccversion = 2.0.11

    cccmaxhops = 1

    cccreshare = 0

    audisabled = 1


    [reader]

    label = server2

    protocol = cccam

    device = satx1.elsa12.com, xxxxx

    user = xxxx

    password = xxxx

    keepalive = 1

    ccckeepalive = 1

    disablecrccws_only_for = 0500:032830,030B00,042820;1811:003311,003315;1819:00006D

    group = 1

    emmcache = 1,1,3,1

    dropbadcws = 1

    cccversion = 2.0.11

    cccmaxhops = 1

    cccreshare = 0

    audisabled = 1


    [reader]

    label = server3

    protocol = cccam

    device = satx2.elsa12.com, xxxxx

    user = xxxx

    password = xxxx

    keepalive = 1

    ccckeepalive = 1

    disablecrccws_only_for = 0500:032830,030B00,042820;1811:003311,003315;1819:00006D

    group = 1

    emmcache = 1,1,3,1

    dropbadcws = 1

    cccversion = 2.0.11

    cccmaxhops = 1

    cccreshare = 0

    audisabled = 1


    [reader]

    label = server4

    protocol = cccam

    device = satx3.elsa12.com, xxxxx

    user = xxxx

    password = xxxx

    keepalive = 1

    ccckeepalive = 1

    disablecrccws_only_for = 0500:032830,030B00,042820;1811:003311,003315;1819:00006D

    group = 1

    emmcache = 1,1,3,1

    dropbadcws = 1

    cccversion = 2.0.11

    cccmaxhops = 1

    cccreshare = 0

    audisabled = 1


    [reader]

    label = server5

    protocol = cccam

    device = satx4.elsa12.com, xxxxx

    user = xxxx

    password = xxxx

    keepalive = 1

    ccckeepalive = 1

    disablecrccws_only_for = 0500:032830,030B00,042820;1811:003311,003315;1819:00006D

    group = 1

    emmcache = 1,1,3,1

    dropbadcws = 1

    cccversion = 2.0.11

    cccmaxhops = 1

    cccreshare = 0

    audisabled = 1


    ####################### SoftCams ############################


    [reader]

    label = SoftCam.Key

    protocol = constcw

    device = /etc/tuxbox/config/SoftCam.Key

    cacheex = 0

    cacheex_maxhop = 0

    cacheex_allow_request = 0

    group = 2

    dropbadcws = 0

    disablecrccws = 0


    [reader]

    label = emulator

    protocol = emu

    device = /usr/keys/SoftCam.Key

    #services = !afn

    caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010

    detect = cd

    ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

    disablecrccws_only_for = 0E00:000000

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

    Quote from temizel

    Hi,

    What is the advantage of using ncam over oscam-emu?

    NONE!!!


    In fact ncam is just a closed source clone of oscam-emu and as such (closed source) it violates oscam's and oscam-emu's licence.


    In addition, if someone takes a open source program and re-releases it in a closed source form, I would be suspicious of what kind of malicious code he has added...

    Quote from fairbird

    And what is this ?!!

    https://github.com/fairbird/NCam

    And here recipe to build with openvision

    https://github.com/OpenVisionE…2-plugin-softcams-ncam.bb


    Your repository is created the wrong way. I am not sure this is done on purpose or by ignorance.


    Your repo is NOT a fork/clone of the oscam-emu repo and all commit history is gone. I am not sure how you pull updates from oscam-emu, but I see all commits under your name... This is not a very nice thing to do...


    Also, doing it this way it is impossible for the osam-emu devs to track the actual changes you have made and pull them back to their repo, if they find them useful.

    1-I did not make fork before never ever from any source

    2-I was started to download full source from original ncam source and edit file by my self time to time from different source not from osam-emu only ..

    some commits from orginal oscam svn some from osam-emu some from my edit some from my friends ...etc

    3-I did not plan to do the Source of ncam because I not need. All my work in my environment source and I compile all binary file directly not to use recipe file.

    4-I have created my ncam source because a lot of friends how use it ncam ask me to create it then they can build privet ncam to their devices depend on recipe file as like as openvision team.

    5-I'm not use pull updates I use this method ..

    *update my files directly in source on my pc then I use this commands (Because I can not make pull updates, and do not break the source because there are some codes different between oscam and ncam )

    Code
    cd "name of folder"
git init
git add .
git commit -m "commit"
git remote add origin https://github.com/username/.......... .git
git push -f origin master

    IS IT CLEAR ?!!!

NCam Support Forum

Configs, discussion, downloads and guides for NCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login