VU+ Solo 2 doesn`t start after software update

Hi

This sounds like the Flashing want start and since you can get access with FTP the box has not been proper flashed.

Power button should be flashing and when you press it display should show that flashing is in progress

and when done a timer in the display should count down to restart do you see that info?

You have USB ports in the front and also in the back of your Vu+ Solo2 try to use another port.

Second since you have FTP access you could upload the flash image to your HDD if you have one in your box?

You can Flash from the HDD also and need no USB stick

You have an fresh image downloaded as a zip file?

If not download the one you prefer then extract the file and inside you find a folder named vuplus

Upload that folder to your HDD and turn off your box with the power button attached at the back (Main power button

Remove any usb memory stick if you have one attached and turn on power with the switch at the back of your box

Now start tapping on the power/standby button on the front and flashing should start :)

Button dont allways flash as with the usb so start tapping as soon as possible and stop when you see the flashing in the display