help with Oscam timeout

There are 7 replies in this Thread which was already clicked 9,461 times. The last Post () by m2snd.

    I'm trying to mount a oscam server with ubuntu 10.10


    I followed this http://linuxsat-support.com/li…-oscam-smargo-reader.html .


    To read the card i have a SCR3310 reader (SCM Microsystems) , and i used this http://linuxsat-support.com/li…key-readers-linux-pc.html to install it. Sometimes, the led of this reader blinks, i don t if this is normal.


    my server files
    oscam.conf


    oscam.server

    Code
    [reader]
label    = meo
protocol = pcsc
device   = 1
group    = 1
detect   = cd
caid     = 0100
emmcache = 1,3,2


    oscam.user

    Code
    [account]
user            = aaaa
pwd             = bbbb
monlevel        = 0
au              = 1
cccmaxhops      = 5
cccreshare      = 3
group           = 1


    Problem:
    I can't see tv much more than 5 minutes without freezing, Other times freeze in seconds. At moment moment i'm using last oscam installed. I tried other versions, but is the same.


    my log file:



    I ' don't know what i can do more to fix this issue. I would appreciate your help.

    Hi, thanks for the replay. I raised up to timepout 20000


    2012/05/03 13:30:07 B7602920 c amiko (0100&005221/0000/019F/64:7463): found (314 ms) by meo
    2012/05/03 13:30:12 B7602920 c amiko (0100&005221/0000/019F/64:E89E): found (310 ms) by meo
    2012/05/03 13:30:27 B7602920 c amiko (0100&005221/0000/019F/64:46B6): found (310 ms) by meo
    2012/05/03 13:30:42 B7602920 c amiko (0100&005221/0000/019F/64:491D): found (314 ms) by meo
    2012/05/03 13:30:57 B7602920 c amiko (0100&005221/0000/019F/64:2BCD): found (311 ms) by meo
    2012/05/03 13:31:12 B7602920 c amiko (0100&005221/0000/019F/64:7295): found (311 ms) by meo
    2012/05/03 13:31:46 B7602920 c amiko (0100&005221/0000/019F/64:D31D): timeout (20001 ms)
    2012/05/03 13:31:46 B7602920 c amiko (0100&005221/0000/019F/64:D31D): timeout (17494 ms)
    2012/05/03 13:31:57 B7600560 r dropped old reader answer rc=4 from meo time 31091ms
    2012/05/03 13:31:57 B7600560 r dropping client data for meo time 30s
    2012/05/03 13:31:57 B7600560 r card ejected
    2012/05/03 13:31:57 B7602920 c amiko (0100&005221/0000/019F/64:FF33): not found (16090 ms) by meo
    2012/05/03 13:31:57 B7602920 c amiko (0100&005221/0000/019F/64:FF33): not found (13497 ms) by meo
    2012/05/03 13:34:04 B76041E8 c encrypted cccam-client 188.37.209.18 granted (amiko, au=auto (1 reader))
    2012/05/03 13:34:14 B76041E8 c amiko (0100&005221/0000/0070/64:1084): rejected group (0 ms) (0 of 0) (no matching reader)
    2012/05/03 13:34:16 B76041E8 c amiko (0100&005221/0000/0070/64:01F4): rejected group (0 ms) (0 of 0) (no matching reader)


    Still the same as you can see...

    Quote from Ten Below

    problem is limited to a small number of peers you cannot expect a proxie reader to behave like a local card. Try disabling this reader and see if the problem persists.


    Please can you explain what you mean with that...sorry my english is not so good


    I tried this config on my Amiko Alien running as server to my Ariva, and works with no problem. Only i put internal protocol instead PCSC. I am thinking maybe is the reader...is normal a reader blinks sometimes? maybe is not properly installed...


    What i wanted to do, is running my laptop as ubuntu server to my Alien and Ariva. Thanks again

    Hi, again...
    Ok...this weekend, i have traied to make a windows server with http://linuxsat-support.com/os…all-oscam-windows-pc.html.
    with the same files configs i used with ubuntu server, in windows work, work....already 2 dias with no freezing at all.


    So, is not the the reader, maybe the PCSC install protocol. I follwed this http://linuxsat-support.com/li…key-readers-linux-pc.html, but i have a doubt: when i edit the comando


    Code
    gedit /etc/opensc/opensc.conf


    i dont see any line with

    Code
    reader_drivers = pcsc, ctapi;


    i found this

    Code
    # CT-API module configuration.
	reader_driver ctapi {


    and this:

    Code
    # The following section shows definitions for PC/SC readers.
	reader_driver pcsc {


    What the line to remove?
    Thanks guys

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login