try this over putty>>>telnet
opkg update
opkg install kernel-module-rtl8192cu
opkg install firmware-rtl8192cu
try this over putty>>>telnet
opkg update
opkg install kernel-module-rtl8192cu
opkg install firmware-rtl8192cu
You can double click green button. and install by feeds.
Hi,
How do I install the latest version of oscam with this image? Thanks.
1 copy file "enigma2-softcams-oscam-all-images_11.578-emu-r798-arm+mips_all.ipk " with DCC v.2.96 our Winscp
to directory "var/volatile/tmp" on your Dream (I use a Dream DM800se)
Go to in you Dream:
Menu
Definitions
Software manager
Install local extension
Memory / tmp
Install extensions
choose extension
enigma2-softcams-oscam-all-images_11.578-emu-r798-arm+mips_all.ipk
install,
After on DCC v2.96 our Winscp in the directory "/etc/tuxbox/config" you will config your oscam
oscam.ccache
oscam.conf ------------"must Config"
oscam.dvbapi
oscam.provid
oscam.server-----------"must config"
oscam.services
oscam.srvid
oscam.srvid2
oscam.user --------------"must config"
Then in softcam / CI on the menu of your Dream chose the Cam that you installed and restarted.
I think I haven't forgotten anything:redface:
Best Regards
I have a question. I have a8p sim installed on my dm800se, is it worth replacing it with sim 2.10? or do I install the original SSL84 afterwards?
通过菜单初始化USB。
HI,
Thanks,it works well.But,I‘m using chinese language。When set gui chinese It can't SUPPORT。
Please help me。
绿色按钮点开插件浏览 -> 再次按绿色按钮出现可安装的插件列表 -> 安装language里的zh_CN 语言包 -> 安装中文字体包 font里的wqy-microhei
绿色按钮点开插件浏览 -> 再次按绿色按钮出现可安装的插件列表 -> 安装language里的zh_CN 语言包 -> 安装中文字体包 font里的wqy-microhei
中文字体包 font里的wqy-microhei能否给个下载链接
I can't find the "second_box" set.It used to be in openpli 4.0.
"Enable remote enigma2 receiver to be tried to tune into services that cannot "
"be tuned into locally (e.g. tuner is occupied or service type is unavailable "
"on the local tuner. Specify complete URL including http:// and port number "
"(normally ...:8001), e.g. http://second_box:8001."
I have a question. I have a8p sim installed on my dm800se, is it worth replacing it with sim 2.10? or do I install the original SSL84 afterwards?
hi you no need to change your sim the sim A8P accept a lot of images included the original images.
I do have this image and works fine
Openpli sim A8P-Wifi ok-dm800se
Openpli sim A8P-Wifi ok-dm800se.rar
All the best
https://www.linuxsat-support.com/openpli-7-2-sim2.1-dm800se-20200520.zip/
Is this one compatible with DM800 se Clone?
Is this one compatible with DM800 se Clone?
Yes, a SIM2 clone. Don`t try it on any other clone.
I think I made mistake earlier so my dm800 got error "No ca found". Cannot upload any firmware anymore. Do you know any Tutorial to fix the problem?
Do you know any Tutorial to fix the problem?
How To Recover No Ca Error On A DM800
Or try this tool ~ Dreambox OptiFlasher Enigma2 EDition Latest Version
ok thanks but I don't have RS232 cable and in that case, I don't know where I can connect RS232 to the DM800 se. I will post new topic to find help.
ok thanks but I don't have RS232 cable and in that case, I don't know where I can connect RS232 to the DM800 se. I will post new topic to find help.
Without an RS232 cable, nothing will work. Buy a cable and there will be no problems. This is not the last receiver recovery you have.
ok thanks but I don't have RS232 cable and in that case, I don't know where I can connect RS232 to the DM800 se. I will post new topic to find help.
My friend in your box you have to Connect the Mini USB Cable (DM800SE) and not the RS232 null cable.
The RS232 is for the DM 800 HD and not for the DM800SE HD ,
the rest of the procedure is the same.
ok thanks but I don't have RS232 cable and in that case, I don't know where I can connect RS232 to the DM800 se. I will post new topic to find help.
Just mini usb cable for DM800HDse boxes,
Emo
Yes. I found solution with mini usb. I might install CP210X windows driver first and now it is ok. My next problem is the device work on Sim A8P. The only openpli I found is openpli its December 2019 OpenPLI 4. Once, I put it, I can open DM800 in FIlezilla client ftp for a moment, but now, I cannot reach the DM anymore. I'm using Static IP/root/dremabox as login and password/port 21. Maybe I need to re install the openpli image again, but I'm not sure.
Don’t have an account yet? Register yourself now and be a part of our community!