I am trying to install the latest oscam 11517 on a tiviar mipsel 5.1 dual core BCM7356 chipset, running vix 5.1. The plugin download facility in the menu only allows for an older version so I have to install manually. Can someone point me to the correct version as I am not having much success with various ones that I have tried.
oscam for Tiviar Alpha Plus with openvix image
-
- MIPS Support
- hs5424
- Thread is marked as Resolved.
-
-
Download the latest oscam from here ~ mips-tuxbox-oe2.0
Extract the attachment > with an FTP tool go to /usr/softcams folder > send the new oscam here > change permissions on the new oscam to 755 > reboot
-
Hi MasterG. Thanks for the advise.
I installed 11529 as you suggested and removed the old version but for some reason I cannot see oscam with the Web interface. My oscam.cfg seems ok . see below.
When I start oscam manually with the remote control is says 'Active'.
Any ideas.
[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1
http_status_log = 1
-
My oscam.cfg seems ok
Do you mean oscam.conf ?
I don`t have a MIPS based receiver to test this version.
What happens when you try to start oscam with putty/telnet ?
/usr/softcams/name_of_oscam
I`ve attached configs you can try with.
-
When I putty into the box and input /usr/bin/name_of_oscam I get 'no such file or directory'.
Just a thought, do I need to re-name the oscam when I install in in softcams and ch755 it
-
name_of_oscam is the actual name of the oscam file.
if you didn`t change the name of oscam then use this /usr/softcams/oscam-svn11529-mipsoe20-webif-dvbapi-emu796-upx
-
master G
Added the Label MIPS HD Oscam-emu Support -
I put it in putty as above with the actual name and it says no such file or directory
-
I`ve edited the command, try it again.
-
still the same
I think oscam isn't running at all. The box shows a status log with the info button when in softcam manager. It says that it can't find ' oscam-svn11529-mipsoe20-webif-dvbapi-emu796-upx.tar'.
-
rename the file to oscam1
change permissions on the file to 755
reboot
then in putty /usr/softcams/oscam1
-
Now this is what I see.
cannot execute binary file: Exec format error
-
It says that it can't find ' oscam-svn11529-mipsoe20-webif-dvbapi-emu796-upx.tar
You havn`t extracted it first. Its still .tar extension.
-
Top marks for you spotting that.
I used a different unzip sw and reinstalled it. I now ran /usr/softcams/oscam-svn11529-mipsoe20-webif-dvbapi-emu796-upx
and am getting a log type information saying 'bind request failed (Address already in use).
-
Its working now, but something isn`t right with your configs. Is there anything else in the log before that error?
did you check the web interface?
-
2019/07/12 21:45:34 00000000 s >> OSCam << cardserver log switched, version buil d-DreamOSat-1.20_svn, build r11529-796 (mipsel-unknown-linux-gnu)
2019/07/12 21:45:34 00000000 s (main) System name = Linux
2019/07/12 21:45:34 00000000 s (main) Host name = tiviaraplus
2019/07/12 21:45:34 00000000 s (main) Release = 4.10.6
2019/07/12 21:45:34 00000000 s (main) Version = #1 SMP Thu May 10 06: 20:41 BST 2018
2019/07/12 21:45:34 00000000 s (main) Machine = mips
2019/07/12 21:45:34 00000000 s (main) Stb model = dm800se
2019/07/12 21:45:34 00000000 s (main) Stb boxtype = tiviaraplus
2019/07/12 21:45:34 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5503
2019/07/12 21:45:34 00000000 s (emu) OSCam-Emu version 796
2019/07/12 21:45:34 00000000 s (config) userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2019/07/12 21:45:34 00000000 s (main) signal handling initialized
2019/07/12 21:45:34 00000000 s (config) 2 provid's loaded
2019/07/12 21:45:34 00000000 s (config) 6 service-id's loaded in 0 ms
2019/07/12 21:45:34 00000000 s (net) newcamd: Bind request failed (Address already in use), waiting another 119 seconds
2019/07/12 21:45:35 00000000 s (net) newcamd: Bind request failed (Address
It must be my configs. Never had this before but I am no expert at this.
-
open oscam.conf and delete the [newcamd] values
restart oscam
-
OK. Some success at last. I cut my oscam config down to this. The Web interface is now running again. As you can see I am trying to open some German channels with an N line my friend gave me.
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
disablecrccws_only_for = 0E00:000000;0500:050F00;09C4:0000 00;098C:000000;098D:000000
[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1
http_status_log = 1
-
German channels ran for about 3 seconds when I restarted oscam.
-
The Live Log in the web interface should give you some indication as to why that is happening.
-
To my untrained eye all looks ok except for the last of the log. Server and ports I have modified for obvious reasons.
2019/07/12 22:08:35 648B1AA8 p (reader) germantest [newcamd] connecting to xxxxxxxxxxxxxxx
2019/07/12 22:08:35 33EDAE55 p (reader) germantest2 [newcamd] connecting to xxxxxxxxxxxxxxx
2019/07/12 22:08:35 648B1AA8 p (newcamd) Newcamd Server: xxxxxxxxxxxxxxxx - UserID: 0
2019/07/12 22:08:35 648B1AA8 p (newcamd) CAID: 09C4 - UA: 0000000000000000 - Provider # 1
2019/07/12 22:08:35 648B1AA8 p (newcamd) Provider ID: 000000 - SA: 00000000
2019/07/12 22:08:35 33EDAE55 p (newcamd) Newcamd Server: xxxxxxxxxxxx - UserID: 0
2019/07/12 22:08:35 33EDAE55 p (newcamd) CAID: 098C - UA: 0000000000000000 - Provider # 1
2019/07/12 22:08:35 33EDAE55 p (newcamd) Provider ID: 000000 - SA: 00000000
2019/07/12 22:08:38 648B1AA8 p (reader) germantest [newcamd] disconnected: reason receive error1
2019/07/12 22:08:38 648B1AA8 p (newcamd) Connection closed to remote server
2019/07/12 22:08:38 33EDAE55 p (reader) germantest2 [newcamd] disconnected: reason receive error1
2019/07/12 22:08:38 33EDAE55 p (newcamd) Connection closed to remote server
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!