طريقة ريكوفري بالكابل والنت لاجهزة الدريم الحديثة DM7080HD-DM820HD-DM520-DM9X0
المتطلبات
كابل النت RJ 45 يربط الرسيفر بالمودم
كابل للاتصال بالكمبيوتر miniusb
برنامج putty.exe
https://the.earth.li/~sgtatham/putty/latest/w32/putty.exe
برنامج PumpKIN.exe
https://softfamous.com/pumpkin/
العملية
Turn off the box
Connect box to network
connect the service port (miniusb) with PC
Windows 10 -> installs the drivers automatically
Check the Com Port in the Device Manager under com & lpt (example: Silicon Labs COM8)
Connect box to power (do not turn on)
start putty.exe (in the attached package)
Change point from SSH to Serial
enter the port from the device manager in hostname (example com8)
open (OPEN) click
Turn on the box
ctrl + c press (not too early then man comes to the bios // then just turn off and turn on)
if the box with CFE> stands the PumpKIN.exe start (firewall with questions release)
Click in the telnet (COM PUTTY window) and execute the following commands
ifconfig eth0 -auto
then the drawn ip should appear
now
boot -tftp -elf XXX.XXX.XXX.X: NNNNNN
(Replace XXX.XXX.XXX.X with the ip of the pc on which the pumpkin.exe is running)
Replace NNNNNN with one of the following labels
rescue-dm520.bin
rescue-dm820.bin
rescue-dm900.bin
rescue-dm7080.bin
Example boot -tftp -elf 192.168.1.21:rescue-dm520.bin
Now open the browser and enter the ifcconfig drawn ip
Now you can flash with the latest newnigma2 image or an online recovery image
