Spark ST1 7162 image installation

Neutrino3.7.1_1-4-2019-7162-Receiver

http://download807.mediafire.c…-4-2019-7162-Receiver.zip

HOW TO LOAD ENIGMA2 FIRMWARE WITH SPARK PLUGIN

USING A USB STICK AND EASY TO FOLLOW ON-SCREEN

MENU IN SPARK - FOR THE AMIKO ALIEN / ALIEN 2

Items required:

USB Stick Formatted to FAT32 – Use HP Format Tool for

formatting if you have any problems with the USB not being

seen by the Amiko Alien / Alien 2

Spark Mini Plugins pack for the Amiko Alien / Alien 2

Enigma2 Firmware for the Amiko Alien / Alien 2

1)

Download the.

Plugin Pack and save this file to your computer. .

If you need this pack will pm me

2)

Insert a USB stick into your computer, open the Plugin

Pack file you just downloaded and extract the complete

plugin directory from the .zip or .rar file to the root of the

USB stick (which must have been pre-formatted to FAT 32).

3)

Now remove the USB stick from your computer and with

your Amiko Alien / Alien 2 receiver powered on and

connected to your TV insert the USB stick into a USB port on

Amiko Alien / Alien 2 receiver (either front or rear USB port

will work in the case of the Alien 2 - just ensure you have no

other USB devices connected at the time).

4)

Within a few seconds the Amiko Alien / Alien 2 receiver

will read the USB stick and then automatically prompt you on

screen saying ‘Confirm Do you want to upgrade plug in?’ –

Select YES using the remote control arrow keys and then

press OK on the remote control.

This will now display the ‘Upgrade from USB’ menu and the

update will start automatically which will only take a few

seconds and once complete will automatically reboot your

receiver. At the point of reboot you can now remove the USB

stick from the Amiko Alien / Alien 2 (if you don’t then the

receiver will keep prompting to update after each reboot -

you can just click no though if you wish).

5)

When your Amiko Alien / Alien 2 receiver has finished

booting back up you should now be back to the usual Spark

firmware but there will now has several plugins that have

been installed which can all be found by selecting MENU >

Plug in using the remote control.

At this point you are now half way there, we have all the

tools require to install Enigma2 firmware via Spark so we

just need to get the Enigma2 firmware itself.

6)

Download and save your required Enigma2 firmware for

the Amiko Alien / Alien 2 to your computer.

7)

Insert a USB stick into your computer, open the Enigma2

firmware file you just

downloaded and extract the two files from the .zip or .rar file

to the

root

of the USB stick (which must have been pre-

formatted to FAT 32). These files will be named uImage and

e2jffs2.img.

8)

Now remove the USB stick from your computer and with

your Amiko Alien / Alien 2 receiver powered on and booted

to Spark and connected to your TV insert the USB stick into a

USB port on Amiko Alien / Alien 2 (either front or rear USB

port in the case of the Alien 2).

9)

Within a few seconds the Amiko Alien / Alien 2 receiver

will read the USB stick. After a few seconds using the remote

control go to MENU > Plug in > plugin_e2upgrade.s and

while this is highlighted press the OK button which should

take you straight to the Enigma2 Update menu.

10)

Make sure the Update path is showing as /storage/c/

(providing the two files where save to the root of your USB

stick) and then press RED (Enigma2 Update).

You should see a pop up on-screen explaining about the

updating Enigma2 and warning you not to power off the

receiver (this is all automated functions and messages – you

don’t need press and keys at this point).

After a short while the message will disappear and you will

be returned back to the Enigma2 Update menu – at this point

you are actually finished and Enigma2 is now flashed, so you

can exit all menus and reboot the receiver yourself and using

the FORCE function on boot up make the receiver boot into

Enigma2 mode (by first powering down the receiver and

then powering on the receiver again while pressing and

holding the OK button on the front of the receiver until

FORCE is shown on the front screen, then pressings the

down arrow (Enigma2) on the front of the receiver and then

pressing OK on the front of the receiver)

Your Amiko Alien / Alien 2 is now in Enigma2 mode and so

will boot to this mode each time as default!

If you wish to change this back to Spark as the default it’s

very easy to do, it’s basically using the FORCE function on

boot up make the receiver boot into Spark mode which is

done by pressing and holding the OK button on the front of

the receiver until FORCE is on the front screen, then

pressings the up arrow (Spark) on the front of the receiver

and then pressing OK on the front of the receiver.