How to change enigma2 bootlogo

There are 18 replies in this Thread which was already clicked 21,685 times. The last Post () by Reza Mojab.

    I want some help

    I have a boot logo for vu+Duo2 with this name or font inside, I now want to change it to Vu+ Ultimo 4K. How can id o this?

    Can someone help me on this, if you have some experience or know-how in making bootlogos?

    Thank you

    thanks sir would u pls, to give us a new bootlogo for vu+ duo 2 to replaced it as your suggestion,

    many thanks

    image is Open Pli 9 , just please if you have some or in making upload bootlogo

    thanks

    reza

    Edited once, last by master G: Merged a post created by Reza Mojab into this post. ().

    Reza Mojab


    What you all mention, this .MVI file, is already the Enigma2 recording screen, not the splash logo of the device manufacturer, which is displayed immediately when the set-top box is turned on for a short time.


    You have the flashing logo of the device from the Vu+ manufacturer in the attachment... unzip it normally to a USB key and flash the Vu+ Duo2 set-top box. This is the original device logo from the manufacturer of the Vu+ device.

    ok , it means that unzip attachment file a copy to USB , then like as installed image put on the receiver & power off unit and start up

    automatically replaced file .its ok?

    and its mentioned that the , MVI file is already the enigma 2 its ok. but when since i installed Open Atv image , then reinstalled and changed to Open Pli

    when the set-top box is turned on for a short time bootlogo last image still running which is displayed immediately

    Hi.


    After connecting the set-top box to the mains or even during a full reboot of the set-top box... the first few seconds of the device booting, you must see the manufacturer's logo on the TV.


    If you extract the manufacturer's logo (splash....bin file) to disk and rename it to .BMP, you will also see its appearance. The "splash....bin" file format for Vu+ flashing is a plain BMP file at a predetermined resolution and color depth.


    This image should appear after turning on the set-top box or during a full reboot of the set-top box. If you did not manage to flash it, maybe you are doing something wrong, or your Vu+ is a different model than you wrote, i.e. other than Duo2.


    EDIT:


    It is also possible that older Vu+ devices work differently when flashing. For example, they also need some other flash files when flashing, and not just one "splash...bin" file. I'm not sure. It is quite possible.


    In the case of my Vu+ Solo SE V2, this one file "splash...bin" and the "force" file what I sent you in the ZIP file are sufficient. That is that all you need is the "splash...bin" file and the "force" file (for the Solo SE V2, since there is no push button to start the flash process, the flash process must be forced by itself from the USB key). I really don't know. Some older set-top boxes are really strange :).


    You can try another way... but... as first, backup all your settings before flashing the original Vu+ firmware to the set-top box. After flashing and restoring the original firmware with the original "splash......bin" file, flash the previous firmware again. And restore all your backed up settings. If it is an OpenATV image (firmware), delete the "splash....bin" file from the USB key, after extracting the archive file from OpenATV !

A collection of the best Enigma2 bootlogos

Find startup screens and branding for various teams, images, and receiver models. Find and share Enigma2 bootlogos. A community collection of startup screens for all major receiver teams and images.