PKT-hyperion-7.0-4127-dm800se-sim2-20012020-Pgs

Quote from hall9000

Quote from parageria

Yes , but you must read.........

4.now ftp to your receiver and move open-multiboot-upload folder to /media/usb replace

give permissions 755 on inside files

5.move any nfi image to /media/usb/open-multiboot-upload (one for every time)

6.edit unpack-nfi.sh file in the last line and replace "OPENSPA" with your prefer name for image

if use hdd must change WORKDIR and INSTALLDIR

7.telnet to /media/usb/open-multiboot-upload and give this command $ ./unpack-nfi.sh

Wait about 10 min and( you can see on terminal finish of job) your new image extracted to /media/usb/open-multiboot dir

8.reboot your box

9.On openmultiboot interface you can see new images select the new and press Ok

YOUR RECEIVER REBOOT ON NEW MULTIBOOT IMAGE.

Display More

Hello @parageria

I followed your instructions step by step.

Installed image via telnet.

Checked via ftp for existence of root folders.

I rebooted and selected PKT image in the openmultiboot interface.

But unfortunately when I had to load the new image and restart ...decoder was blocked.

Now I am forced to read the usb with another decoder and delete image unless you give me some advice......

Thanks

Hall

Display More

don't forget we are on clone dm

after install pkt before reboot, ftp to your receiver ,delete 3.2-dm800se dir, from /lib/modules/ (pkt image)

and put there the one from flash image (openbh)

reboot

read......

.....NOTE openmultiboot, boot any image with the same kernel-modules as is on flash you can install any my image and any image base on pli
for any image base to openatv must change kernel-modules to pli..

Quote from hall9000

Quote from parageria

Quote from hall9000

Quote from parageria

Yes , but you must read.........

4.now ftp to your receiver and move open-multiboot-upload folder to /media/usb replace

give permissions 755 on inside files

5.move any nfi image to /media/usb/open-multiboot-upload (one for every time)

6.edit unpack-nfi.sh file in the last line and replace "OPENSPA" with your prefer name for image

if use hdd must change WORKDIR and INSTALLDIR

7.telnet to /media/usb/open-multiboot-upload and give this command $ ./unpack-nfi.sh

Wait about 10 min and( you can see on terminal finish of job) your new image extracted to /media/usb/open-multiboot dir

8.reboot your box

9.On openmultiboot interface you can see new images select the new and press Ok

YOUR RECEIVER REBOOT ON NEW MULTIBOOT IMAGE.

Display More

Hello @parageria

I followed your instructions step by step.

Installed image via telnet.

Checked via ftp for existence of root folders.

I rebooted and selected PKT image in the openmultiboot interface.

But unfortunately when I had to load the new image and restart ...decoder was blocked.

Now I am forced to read the usb with another decoder and delete image unless you give me some advice......

Thanks

Hall

Display More

don't forget we are on clone dm

after install pkt before reboot, ftp to your receiver ,delete 3.2-dm800se dir, from /lib/modules/ (pkt image)

and put there the one from flash image (openbh)

reboot

read......

.....NOTE openmultiboot, boot any image with the same kernel-modules as is on flash you can install any my image and any image base on pli
for any image base to openatv must change kernel-modules to pli..

Display More

Hi

But.. I seem to remember that in that folder there are also the files for the trialtuner. Am I wrong?

Hall

Display More

YES and NO

we use a os for vuplus zero, for example , with modules-drivers and some mods for dm800se

if you want to install any hardware (tuners ...) you need kernel-drivers for dm800se .

in 3.2-dm800se dir there is drivers for many tuners (chipset)

maybe need to find more...