BPanther's Neutrino - v3.xx for ZGEMMA H7 30/07/2020

There are 27 replies in this Thread which was already clicked 4,044 times. The last Post () by ahmed gazye.

    Quote from ahmed gazye

    My friend / Saraceno84

    I do not have the device, my device is Spark, and it works on it without problems and carried it a lot and work with it can be a friend who owns your same device can benefit you You are not obliged to download the image and work with it as long as you see it as a failed image The topics are presented in the forum for those who love to try and you are not forced to work on it If the team site does not allow registration, it is not my mistake

    Good luck

    Siamo in due a cui non gira l'immagine vuol dire che ci sta un problema, tu hai postato e mi sembra educato darci una risposta senza dover andare da altre parti!!! : Thumbup:

    We are two who do not turn the image means that there is a problem, you posted and it seems polite to give us an answer without having to go elsewhere !!!:thumbup:

    I have given you a clear answer that it works on Spark devices, and I do not have this device in order to give you an answer. I did not make it. The copy has a site and a team and you can deal with them if each member cannot install a specific copy. We refrain from informing the members of what is new.

    If no version is displayed to any team in the forum, and you are not obligated to download or work with it

    Good luck

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for ZGEMMA H7 12/04/2020” to “BPanther's Neutrino - v3.xx for ZGEMMA H7 22/06/2020”.

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for ZGEMMA H7 22/06/2020” to “BPanther's Neutrino - v3.xx for ZGEMMA H7 28/06/2020”.


    User avatar BPanther Administrator

    image -> OK

    image -> UNTESTED (automatically built)

    image -> DEFECTIVE (changes still necessary)

    Basically:

    FLASH -> Flash image for the start from the flash. Write to flash with USB stick.

    USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.

    EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.

    USB -> flash image for starting from flash. Write to flash with USB stick.

    MULTI -> Contains the files from Flash + USB in one package.

    EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.

    USB -> Contains the files for flashing from the USB stick - SingleBoot.

    MULTI -> Contains the files for flashing from the USB stick - MultiBoot.

    There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.

    EXCEPTION VU + DUO

    FLASH -> Currently not available.

    USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.

    MULTI -> Currently not available.

    NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +

    The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag



    122.gif


    122.gif

    The update is available for as at 12/07/2020

    122.gif




    898672957.png


    136115-1999e-png


    https://h7.mbremer.de/FLASH/




    Enjoy & Good luck






    310271357.gif 310271357.gif



    668584774.png



    310271357.gif 310271357.gif

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for ZGEMMA H7 28/06/2020” to “BPanther's Neutrino - v3.xx for ZGEMMA H7 12/07/2020”.

    Hello

    I have openATV and I want to flush second image

    BPanther's Neutrino - v3.xx for ZGEMMA H7S

    when I put the file on USB pendrive

    The box is not recognise the h7_flash_rev18737-ddt. Zip file

    It will not show on the receiver anyone help I will appreciate it

    Thanks

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for ZGEMMA H7 12/07/2020” to “BPanther's Neutrino - v3.xx for ZGEMMA H7 30/07/2020”.

    I do not own the device, but I brought the version for someone who would like to try, so I couldn't help anyone with the setup problems.


    User avatar BPanther Administrator

    image -> OK

    image -> UNTESTED (automatically built)

    image -> DEFECTIVE (changes still necessary)

    Basically:

    FLASH -> Flash image for the start from the flash. Write to flash with USB stick.

    USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.

    EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.

    USB -> flash image for starting from flash. Write to flash with USB stick.

    MULTI -> Contains the files from Flash + USB in one package.

    EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.

    USB -> Contains the files for flashing from the USB stick - SingleBoot.

    MULTI -> Contains the files for flashing from the USB stick - MultiBoot.

    There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.

    EXCEPTION VU + DUO

    FLASH -> Currently not available.

    USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.

    MULTI -> Currently not available.

    NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +

    The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag



    122.gif


    122.gif

    The update is available for as at 30/07/2020

    122.gif




    898672957.png


    136115-1999e-png


    https://h7.mbremer.de/FLASH/




    Enjoy & Good luck






    310271357.gif 310271357.gif



    668584774.png



    310271357.gif 310271357.gif

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login