BPanther's Neutrino - v3.xx for VU+DUO 4K 05/09/2020

There are 36 replies in this Thread which was already clicked 6,855 times. The last Post () by JuergenK1.


    User avatar BPanther Administrator

    image -> OK

    image -> UNTESTED (automatically built)

    image -> DEFECTIVE (changes still necessary)

    Basically:

    FLASH -> Flash image for the start from the flash. Write to flash with USB stick.

    USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.

    EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.

    USB -> flash image for starting from flash. Write to flash with USB stick.

    MULTI -> Contains the files from Flash + USB in one package.

    EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.

    USB -> Contains the files for flashing from the USB stick - SingleBoot.

    MULTI -> Contains the files for flashing from the USB stick - MultiBoot.

    There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.

    EXCEPTION VU + DUO

    FLASH -> Currently not available.

    USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.

    MULTI -> Currently not available.

    NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +

    The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag



    122.gif


    122.gif

    The update is available for as at 12/07/2020

    122.gif




    898672957.png


    136115-1999e-png



    https://vuduo4k.mbremer.de/FLASH/




    Enjoy & Good luck






    310271357.gif 310271357.gif



    668584774.png



    310271357.gif 310271357.gif

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for VU+DUO 4K 28/06/2020” to “BPanther's Neutrino - v3.xx for VU+DUO 4K12/07/2020”.

    Das ganze ist so umständlich,warum macht man es nicht so wie bei allen anderen Images,?Mann entpackt die Zip- Datei auf ein USB-Stück und steckt dieses in die Box beim Start drückt man die Standbay Taste kurz und schon geht es los so läuft es bei einen normalen E2 Images und ohne Probleme,ohne das ich da was nach temp kopieren muss usw.Passt euer Images den E2 Images an dann habt ihr keine Probleme und wir Nutzer auch nicht und dann kommt das ganze auch bei alles an.Wenn Sie

    Quote from JuergenK1

    Die Duo 4K läuft nicht mit diesen Images,also sollten diese es sein lassen für dieses Gerät ein Images zu bauen weil es nur Ärger und nichts bringt.Wenn Sie

    Please excuse me, but that's not true. the Image runs very well on the Duo 4k. You just have to do everything as described ;)

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for VU+DUO 4K12/07/2020” to “BPanther's Neutrino - v3.xx for VU+DUO 4K 30/07/2020”.

    I do not own the device, but I brought the version for someone who would like to try, so I couldn't help anyone with the setup problems.


    User avatar BPanther Administrator

    image -> OK

    image -> UNTESTED (automatically built)

    image -> DEFECTIVE (changes still necessary)

    Basically:

    FLASH -> Flash image for the start from the flash. Write to flash with USB stick.

    USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.

    EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.

    USB -> flash image for starting from flash. Write to flash with USB stick.

    MULTI -> Contains the files from Flash + USB in one package.

    EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K

    FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.

    USB -> Contains the files for flashing from the USB stick - SingleBoot.

    MULTI -> Contains the files for flashing from the USB stick - MultiBoot.

    There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.

    EXCEPTION VU + DUO

    FLASH -> Currently not available.

    USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.

    MULTI -> Currently not available.

    NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +

    The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag




    122.gif


    122.gif

    The update is available for as at 30/07/2020

    122.gif




    898672957.png


    136115-1999e-png



    https://vuduo4k.mbremer.de/FLASH/




    Enjoy & Good luck






    310271357.gif 310271357.gif



    668584774.png



    310271357.gif 310271357.gif

    Es ist kein E2 Images,deshalb diese Probleme für dieses Gerät läuft am besten VTi oder OpenATV .

  • ahmed gazye

    Changed the title of the thread from “BPanther's Neutrino - v3.xx for VU+DUO 4K 30/07/2020” to “BPanther's Neutrino - v3.xx for VU+DUO 4K 05/09/2020”.

    Aftere installing Bpanthers neutrino on vuplus duo 4k there is no way to reinstall enigma (VTI or VIX of another).

    I've tried several images. The flash is running and after reboot the system hangs in bootlogo..

    Aftere installing Bpanthers neutrino on vuplus duo 4k there is no way to reinstall enigma (VTI or VIX of another).

    I've tried several images. The flash is running and after reboot the system hangs in bootlogo..

    because the Neutrino BP Images everything changed Has.The Partition Right Not more,and Bootsystem is also changed.Therefore just E2 Images flashen

    the to this Receiver fit.The BP Images good Nothing ,these do more Damage as Use.Also can man with this the Receiver Not full Benefit.It absence hbbtv and

    Chromium-Browser for YoutbeTV.

VU+ Duo 4K PVR ready Linux Enigma2 Receiver UHD 2160p

Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login