There are 13 replies in this Thread which was already clicked 3,908 times. The last Post () by ahmed gazye.
BPanther's Neutrino - v3.xx for VU+UNO 4K 2/2/2020
The Image became wonderful
The multi-stream frequency support for the porphyio is great
The image is non-Crashed, very fast to move between channels, and quick to share
The version is small in size 43 MB
https://vuuno4k.mbremer.de/FLASH/
My friend / orion_bilo
I do not own the device, but I have transferred the copy to you those who like the experience, and this is an update of the previous version on the above and the team’s page on the following topic, the way to download from the team page
You can view it and contact the team if you have a note
BPanther Administrator
-> OK
-> UNTESTED (automatically built)
-> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
bu image hakkinda kimse yeterli bilgi vermiyor deniyenler lutfen deneyimlerini yazsin
My friend / jiyan
I do not own the device, You can read the instructions of the team on the topic Or You can contact the team if you have a note
Imege uno4k dated 12 04 2020 does not even switch to installation
I do not own the device, but I brought the version for someone who would like to try, so I couldn't help anyone with the setup problems.
The update is available as at 22/06/2020
https://vuuno4k.mbremer.de/FLASH/
I do not own the device, but I brought the version for someone who would like to try, so I couldn't help anyone with the setup problems.
The update is available as at 28/06/2020
https://vuuno4k.mbremer.de/FLASH/
BPanther Administrator
-> OK
-> UNTESTED (automatically built)
-> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vuuno4k.mbremer.de/FLASH/
I do not own the device, but I brought the version for someone who would like to try, so I couldn't help anyone with the setup problems.
BPanther Administrator
-> OK
-> UNTESTED (automatically built)
-> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 30/07/2020
https://vuuno4k.mbremer.de/FLASH/
Our Admin creative artist / oktus
Give you This boot logo offers you With attachments
Don’t have an account yet? Register yourself now and be a part of our community!
