SH4 images updated.
Dinobots have new drivers.
There are 1,315 replies in this Thread which was already clicked 137,677 times. The last Post () by krasnoludek123.
SH4 images updated.
Dinobots have new drivers.
Spark sti7162 per amikoalien-PurE2-6.5 per il test a partire dal 03/09/2020, spento il decodificatore dopo 3 ore su rimane in carico 5, quindi è bloccato
Try it again.
If not, use a different date PurE2 image.
If that fails, try another Team's image and see....
But if no one else is complaining - probably it's just one of those failed installations...
It happens all the time, in all the boxes - sometimes it takes 2-3 installations until it all sits well, so be persistent! :)
Good luck!
Tried my backup and it's ok, thanks, regards
Delfi says:
QuoteAh well, here we go again:)
Images that are built after or on 8.9.2020 are very likely to need a reflash. Simply too many things have changed. We do hope for better :)
Here is feedback for Pure2 team,,
after testing this image, it needs e2iplayer on feed to be updated or removed, because it is causes device freeze when playing any clip.
When replaced with another e2iplayer from completely different image it works no problem
ok. will check. if you have time, can you make a log.
thx
ok. will check. if you have time, can you make a log.
thx
log is here in this post:
New PurE2 v. 6.5 to test - your feedback, please...
thanks
QuoteFriends,
Did not load on Truman 1+. Any hints to install?
STi 7111/7162? Try a different earlier version of the image...
Hi Gorsky,
I have tried latest 6.5 image on my solo4k, i have few very simple question:
1. Is this image free, as on FNC plugins i am supposed to pay certain amount of money to enable certain functionality of the image?
2. How can i get rid of nag screens on the FNC plugins?
3. do i have to pay again after flashing another version of image?
Thanks:cool1:
If you read a bit - just the Stickies in this section - you would have seen it has to do with KUD, which you get from Franc, if you send a little donation, which you keep on your PC, so when you re-flash you put it back again...... ;) Franc is in no way "mean", you know...
The image itself is free, as are the FNC plugins - a very small part of the FNC plugins' functionality depends on the KUD. I don't even know if Franc has removed that little limitation...? Check it....
Learn about FNC plugins from the relevant Sticky and you will know what to do with them... If you get HD resolution in YIFY search (from 1080 resolution up) - all is there...
thanks for clarifications, however, i'm little confused. The image is free but i have to pay to use it. 24fc9ba35d4301.gif
OK, this is... ridiculous....
"The image itself is free, as are the FNC plugins - a very small part of the FNC plugins' functionality depends on the KUD. I don't even know if Franc has removed that little limitation...? Check it...."
Can you analyse this and try it, as suggested?
Image is HUGE!
FNC Plugins are very small. In fact, Plugins altogether are just a part of the whole thing. And FNC plugins are a part of the part. You dig?
If you install the image and use it - its free. Fully usable.
If you install FNC plugins - they are free. Most are fully usable.
Only a very small number of them have the need for KUD to unlock full functionality. A small ADDED part to the ADDED part to the wholly free PurE2 can NOT be EQUATED with the whole...
Elementary logic?
I believe , ONLY the livescore plugin need the KUD . ALL other stuffs are completely free
Yeah, I wasn't checking but I presumed it was abolished, the small limitations in YIFY....
As far as E2iPlayer is concerned:
Terra built it and tested it and it seems to pan out nicely, he says...
Try it either by downloading the attachment, unpacking it and placing it in Plugins or by SW Update inside PurE2!
Do not update the plugin from within itself, only via PurE2 SW update!!!
And do tell!!!
Good luck!
Display MoreAs far as E2iPlayer is concerned:
Terra built it and tested it and it seems to pan out nicely, he says...
Try it either by downloading the attachment, unpacking it and placing it in Plugins or by SW Update inside PurE2!
Do not update the plugin from within itself, only via PurE2 SW update!!!
And do tell!!!
Good luck!
FEEDBACK
Still same issue, spinner stays on untl clip is finished.
Not so in Terra's test...
Not the same box?
Installed from zero?
Not so in Terra's test...
Not the same box?
Installed from zero?
yes zero.. I ll do fresh installation and try again.. this attached works very well, but it is out of date enigma2-plugin-extensions-e2iplayer_1.1+git3594+c344909-r0_all.ipk
Don’t have an account yet? Register yourself now and be a part of our community!