block on usb card reader on oscam

There are 36 replies in this Thread which was already clicked 5,315 times. The last Post () by hacked.

    hello,

    after thousands of attemps I managed to set internal card reader AND usb smartreader with my 2 conax cards.

    the problem is with usb cardreader because after 1 minute of vision of my TVR ROMANIA cards it stops to work


    do you know why?

    I attach my config and the log I hope you can help me


    thank you in advance

    best regards


    2020/03/04 21:14:24 00000000 s (main) System name = Linux

    2020/03/04 21:14:24 00000000 s (main) Host name = ax61

    2020/03/04 21:14:24 00000000 s (main) Release = 4.4.35

    2020/03/04 21:14:24 00000000 s (main) Version = #1 SMP Sat Jul 20 10:56:00 UTC 2019

    2020/03/04 21:14:24 00000000 s (main) Machine = armv7l

    2020/03/04 21:14:24 00000000 s (main) Stb model = hd61

    2020/03/04 21:14:24 00000000 s (main) Stb boxtype = hd61

    2020/03/04 21:14:24 00000000 s (main) creating pidfile /var/tmp/oscam-emu.pid with pid 2113

    2020/03/04 21:14:24 00000000 s (emu) OSCam-Emu version 798

    2020/03/04 21:14:24 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

    2020/03/04 21:14:24 00000000 s (main) signal handling initialized

    2020/03/04 21:14:24 00000000 s (led) LED support is not active. Can't detect machine type.

    2020/03/04 21:14:24 00000000 s (net) cccam: initialized (fd=4, port=12000)

    2020/03/04 21:14:24 00000000 s (reader) SMARTMOUSE [mouse] creating thread for device /dev/ttyUSB0

    2020/03/04 21:14:24 00000000 s (reader) MTVA [internal] creating thread for device /dev/sci0

    2020/03/04 21:14:24 00000000 s (reader) emulator [emu] creating thread for device emulator

    2020/03/04 21:14:24 00000000 s (main) waiting for local card init

    2020/03/04 21:14:24 0411EDFD r (emu) Stream key delayer initialized

    2020/03/04 21:14:24 0411EDFD r (emu) Stream relay server initialized

    2020/03/04 21:14:24 0411EDFD r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

    2020/03/04 21:14:24 00000000 (emu) INFO: FFDecsa parallel mode = 32

    2020/03/04 21:14:24 232342DC h (webif) webif: decompressed 172595 bytes back into 416816 bytes

    2020/03/04 21:14:24 232342DC h (webif) HTTP Server running. ip=:: port=83

    2020/03/04 21:14:24 1ECD9E6A r (reader) MTVA [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)

    2020/03/04 21:14:24 1ECD9E6A r (reader) MTVA [internal] Reader sci internal, detected box type: hd61

    2020/03/04 21:14:24 787A918C r (reader) SMARTMOUSE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

    2020/03/04 21:14:25 0411EDFD r (reader) emulator [emu] card detected

    2020/03/04 21:14:25 1ECD9E6A r (reader) MTVA [internal] card detected

    2020/03/04 21:14:25 787A918C r (reader) SMARTMOUSE [mouse] card detected

    2020/03/04 21:14:26 1ECD9E6A r (reader) MTVA [internal] ATR: 3B 34 94 00 30 42 30 30

    2020/03/04 21:14:26 0411EDFD r (reader) emulator [emu] found card system emu

    2020/03/04 21:14:26 0411EDFD r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

    2020/03/04 21:14:26 0411EDFD r (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key

    2020/03/04 21:14:26 0411EDFD r (emu) Total keys in memory: W:0 V:6 N:9 I:6 F:155 G:0 P:264 T:177 A:0

    2020/03/04 21:14:26 787A918C r (reader) SMARTMOUSE [mouse] ATR: 3B 24 00 30 42 30 30

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] type: Conax, caid: 0B02, serial: ##########, hex serial: ########, card: v64

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] Providers: 1

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] Provider: 1 Provider-Id: 000000

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] Provider: 1 SharedAddress: ########

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [mouse] found card system conax

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] Package: 1, id: 1010, classes: 01000001, date: 2020/03/01 - 2020/03/31, name: Conax

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] Package: 2, id: 1010, classes: 01000001, date: 2020/02/01 - 2020/02/29, name: Conax

    2020/03/04 21:14:28 787A918C r (reader) SMARTMOUSE [conax] ready for requests

    2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] Warning: needed try nr 2, next ECM has some delay

    2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] card system not supported

    2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] Normal mode failed, reverting to Deprecated Mode

    2020/03/04 21:17:20 1ECD9E6A r (reader) MTVA [internal] ATR: 3B 34 94 00 30 42 30 30

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] type: Conax, caid: 0B1D, serial: ##########, hex serial: ########, card: v64

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] Providers: 1

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] Provider: 1 Provider-Id: 000000

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] Provider: 1 SharedAddress: ########

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [internal] found card system conax

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 1, id: 1070, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 1

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 2, id: 1070, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 1

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 3, id: 1080, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 2

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 4, id: 1080, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Preview 2

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 5, id: 1010, classes: 010001FB, date: 2020/02/01 - 2020/02/29, name: Zone 01

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] Package: 6, id: 1010, classes: 010001FB, date: 2019/11/01 - 2019/11/30, name: Zone 01

    2020/03/04 21:17:25 1ECD9E6A r (reader) MTVA [conax] ready for requests

    2020/03/04 21:17:26 00000000 s (main) init for all local cards done

    2020/03/04 21:17:26 7D098F0E c (client) plain dvbapi-client granted (dvbapi, au=auto (26 reader))

    2020/03/04 21:17:26 7D098F0E c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache

    2020/03/04 21:17:26 7D098F0E c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)

    2020/03/04 21:17:26 7D098F0E c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument

    2020/03/04 21:17:28 7D098F0E c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B02 ECM_PID: 0B02 PROVID: 000000

    2020/03/04 21:17:28 7D098F0E c (dvbapi) Demuxer 0 found 1 ECM pids and 3 STREAM pids in CA PMT

    2020/03/04 21:17:28 7D098F0E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B5A VPID 00C8

    2020/03/04 21:17:28 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:D5F476E8315C85A9F4E2599015059C49): found (360 ms) by SMARTMOUSE

    2020/03/04 21:17:30 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:3C9909CDE4EDCAA2DF28BC520CB925F7): found (361 ms) by SMARTMOUSE

    2020/03/04 21:17:40 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:6D17995F4583742DFDD2065B9109D35C): found (363 ms) by SMARTMOUSE

    2020/03/04 21:17:50 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:D02ABA74CEF1F8D946C3CEFC13C738C0): found (362 ms) by SMARTMOUSE

    2020/03/04 21:18:00 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:431D925888837B8EAF87B3981B404B14): found (360 ms) by SMARTMOUSE

    2020/03/04 21:18:10 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:29966F5EEF39DE3AF6D3FFD6BD4CC803): found (361 ms) by SMARTMOUSE

    2020/03/04 21:18:20 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:F94CAC7ABBD1B07CD43245A252168F30): found (358 ms) by SMARTMOUSE

    2020/03/04 21:18:30 787A918C r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay

    2020/03/04 21:18:34 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:02A50ED34785AB925E8AE6C7CFF5963C): timeout (5000 ms) by SMARTMOUSE

    2020/03/04 21:18:40 7D098F0E c (-) -- Skipped 1 duplicated log lines --

    2020/03/04 21:18:40 7D098F0E c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

    2020/03/04 21:18:40 7D098F0E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B5A VPID 00C8

    2020/03/04 21:18:44 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:1DA03A1DAAC1E4C51D9C8064B52827BD): timeout (5000 ms) by SMARTMOUSE

    2020/03/04 21:18:46 7D098F0E c (-) -- Skipped 1 duplicated log lines --

    2020/03/04 21:18:46 7D098F0E c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

    2020/03/04 21:18:46 7D098F0E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B5A VPID 00C8

    2020/03/04 21:18:49 7D098F0E c (ecm) dvbapi (0B02@000000/0000/0002/67:1DA03A1DAAC1E4C51D9C8064B52827BD): timeout (5000 ms) by SMARTMOUSE

    2020/03/04 21:18:50 787A918C r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay

    label = TVR


    description = tvr


    protocol = internal


    device = /dev/sci0


    fix07 = 0


    ecmwhitelist = 67


    detect = cd


    detect_seca_nagra_tunneled_card= 0


    mhz = 500


    group = 1


    emmcache = 1,3,2,0


    blockemm-unknown = 1


    blockemm-u = 1


    deprecated = 1


    read_old_classes = 0

    Hello.


    I have found on the internet that this LAG could cause a USB HUB (or maybe low power in the USB connectors in your device or turning off the USB power to save power / USB sleep).


    Or do not have a properly configured user - the so-called "dvbapi" user in the "oscam.user" file, for the purpose of AutoUpdate - http://www.streamboard.tv/wiki/OSCam/en/AU I don't know your provider, so I don't know if it needs to have EMM packets (AU function) written to the decode card. But it is also possible that EMMs are not needed for CONAX crypto mode. I don't know, sorry.


    Example of the "oscam.user" file - for your Oscam configuration:

    Code
    [account]
user     = dvbapi
pwd      = 
caid     = 0B02
# au       = 1
au       = SMARTMOUSE
group    = 9

    What if the "delay" comes from an incorrectly set "lb_weight" in the Oscam configuration? Try to check and change the "lb_weight" settings completely (to test functionality). Also, your "oscam.conf" file is missing an item for setting "lb_mode": http://www.streamboard.tv/wiki…Config/oscam.conf#lb_mode The default value is 0, which means - Disabled.


    Which set top box do you own and which card reader exactly? Is there an external power supply on the reader? Try using it (if you find the appropriate power adapter for the card reader).

    hello everybody

    I've an issue with oscam-emu and smartmouse usb with a tv romania conax card on my ax hd 61

    it's a "simple" card and it does not need pairing


    after almost 60 seconds it stop to work and the image frozen.

    you need to reboot the receiver but after 60 seconds it happens again.


    Can someone help me please?

    thank you in advance

    best regards

    Edited once, last by master G: moved posts into similar thread. ().

    Quote from master G

    Activate the log in the [global] section in oscam.conf with this value logfile = /var/log/oscam.log


    Restart OSCam and wait for the freeze.


    Attach the log here, removing any sensitive info like ip addresses, username

    hello how can I do what you suggest?

    i've found this in live log:

    • 2020/05/03 17:44:50 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:14542B07A25D7254632D9EB7C0A023CB): found (359 ms) by SMARTMOUSE
    • 2020/05/03 17:44:59 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:BF776FC7A84A0FEE53BDBFC9D3DA6121): found (357 ms) by SMARTMOUSE
    • 2020/05/03 17:45:09 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:360CB87575D143C7BBE0928C2AD74B1B): found (355 ms) by SMARTMOUSE
    • 2020/05/03 17:45:19 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:9FB1502353D8428F5BEEF2D08B02B148): found (355 ms) by SMARTMOUSE
    • 2020/05/03 17:45:29 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:A2E588CA761419E56158E0152D7D077A): found (353 ms) by SMARTMOUSE
    • 2020/05/03 17:45:39 2F6D19AF c (ecm) dvbapi (0B02@000000
    • /0000/0004/67:C1F2886275D58ACDAA13F2ABA8F82379): found (360 ms) by SMARTMOUSE
    • 2020/05/03 17:45:51 483623F0 r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay
    • 2020/05/03 17:45:54 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:4FDA907995200346554F593323FBA2C2): timeout (5001 ms) by SMARTMOUSE
    • 2020/05/03 17:45:59 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:4FDA907995200346554F593323FBA2C2): timeout (5000 ms) by SMARTMOUSE
    • 2020/05/03 17:45:59 2F6D19AF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
    • 2020/05/03 17:45:59 2F6D19AF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0020 ANY CHID PMTPID 1B5C VPID 0190
    • 2020/05/03 17:46:04 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:5F48503D7690EF947AD4784066E3DA7B): timeout (5000 ms) by SMARTMOUSE
    • 2020/05/03 17:46:05 2F6D19AF c (-) -- Skipped 1 duplicated log lines --
    • 2020/05/03 17:46:05 2F6D19AF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
    • 2020/05/03 17:46:05 2F6D19AF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0020 ANY CHID PMTPID 1B5C VPID 0190
    • 2020/05/03 17:46:09 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:5F48503D7690EF947AD4784066E3DA7B): timeout (5001 ms) by SMARTMOUSE
    • 2020/05/03 17:46:10 2F6D19AF c (ecm) dvbapi (0B02@000000/0000/0004/67:5F48503D7690EF947AD4784066E3DA7B): timeout (5000 ms) by SMARTMOUSE
    • 2020/05/03 17:46:10 2F6D19AF c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
    • 2020/05/03 17:46:10 2F6D19AF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0020 ANY CHID PMTPID 1B5C VPID 0190
    • 2020/05/03 17:46:11 483623F0 r (reader) SMARTMOUSE [conax] Warning: needed try nr 2, next ECM has some delay

  • master G

    Added the Label Conax Cards OSCam
    Quote from master G
    Quote from 4Him

    how to activate the log you have mentioned before?

    By pasting the highlighted value above into oscam.conf.

    In the webinterface click Files > oscam.conf > look for [webif] > paste in the new value > restart oscam.

    Wait for the freeze then look at the oscam log in /var/log

    hello through ftp I have in var/volatile/log

    folder these files, what do I need to open and share?

    samba (folder)

    boot

    dmesg

    lastlog

    messages

    wtmp


    in webif i've copied in file - oscam.conf

    logfile = /var/log/oscam.log

    Quote from master G
    Quote from 4Him

    hello through ftp I have in var/volatile/log

    Change the value to logfile = /var/volatile/log/oscam.log

    2020/05/03 22:48:14 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5001 ms) by SMARTMOUSE

    2020/05/03 22:48:14 00000000 >> OSCam << cardserver log switched, version 1.20_svn, build r11576-798 (arm-oe-linux-gnueabi)

    2020/05/03 22:48:14 2C6B50B1 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!

    2020/05/03 22:48:14 2C6B50B1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC

    2020/05/03 22:48:16 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5000 ms) by SMARTMOUSE

    2020/05/03 22:48:19 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5001 ms) by SMARTMOUSE

    2020/05/03 22:48:19 2C6B50B1 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

    2020/05/03 22:48:19 2C6B50B1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC

    2020/05/03 22:48:20 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5001 ms) by SMARTMOUSE

    2020/05/03 22:48:21 2C6B50B1 c (ecm) dvbapi (0B02@000000/0000/000F/67:CDBEBF6F39D8E15371FB180371E3414B): timeout (5000 ms) by SMARTMOUSE

    2020/05/03 22:48:21 2C6B50B1 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!

    2020/05/03 22:48:21 2C6B50B1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC

    • Official Post
    Quote from 4Him

    timeout (5001 ms) by SMARTMOUSE

    This log only shows oscam gave up trying that channel. It doesn`t show any other error to give us a reason why.

    Is your smart card reader a smargo ? If so, have you set the mhz to 500 on it (not in oscam.server, on the smargo) ?

    Do you have P: 0B02:000000 in oscam.dvbapi ?

    Show us some other errors from the log, if any.

    Post the reader config from oscam.server for the smart card reader.

    it's a smarteader usb with no mhz setting

    after I putted P: 0B02:000000 in oscam.dvbapi I have no vision at all now. same thing if I remove this string.


    • 2020/05/03 23:48:54 451546A1 r (reader) SMARTMOUSE [mouse] Error getting card status.

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login