DM900 Not BOOTING (STUCK On RED LIGHT)

Help me PLZ

I have DM900, it was running Open ATV image. after online update, it stopped booting, and stuck on RED Light

I tried ONLINE RECOVERY, this is what I got:

[*] Remounting '/dev/mmcblk0p3' to '/data'

[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/recovery.sig'

[*] Copying 'recovery' from local storage

[*] Verifying signature of 'recovery'

gpgv: Signature made Wed Dec 21 02:02:08 2016 UTC using RSA key ID 7DA27561

gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"

[*] Unmounting '/data'

[*] Running './recovery'

[*] Options '-v -b -r'

[*] Mounting '/dev/mmcblk0p3' to '/data'

[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz.sig'

[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz'

[*] Verifying signature of 'dreambox-image-dm900.tar.xz'

gpgv: Signature made Thu Nov 14 16:42:02 2019 UTC using RSA key ID 7DA27561

gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"

[*] Mounting '/dev/mmcblk0p2' to '/mnt'

/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system

[*] Unmounting '/mnt'

umount: can't unmount /mnt: Device or resource busy

[*] Unmounting '/data'

Fatal: Failed to execute './recovery'

then I tried flashing different image no luck

Image: newnigma2-deb-daily-OE2.5-dm900-25_02_2019.tar.xz

dreambox-image-deb-dm900-20190911.tar

openatv-6.3-dm820-20191001.rootfs.tar

I got :

[*] Remounting '/dev/mmcblk0p3' to '/data'

[*] Remounting '/dev/mmcblk0p2' to '/mnt'

/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system

I tried TELNET with the follwoing Commands:

1. wget http://dreamboxupdate.com/open….14-r0-dm900-20171017.bin

root@dm900:~# root@dm900:~# wget http://dreamboxupdate.com/open….14-r0-dm900-20171017.bin --2020-03-07 16:50:55-- http://dreamboxupdate.com/open….14-r0-dm900-20171017.bin Resolving dreamboxupdate.com... 82.149.226.170 Connecting to dreamboxupdate.com|82.149.226.170|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 11648176 (11M) [application/octet-stream] Saving to: ΓÇÿzImage-rescue-3.14-r0-dm900-20171017.bin.1ΓÇÖ zImage-rescue-3.14-r0-dm900-2 100%[=================================================>] 11.11M 1.50MB/s in 13s 2020-03-07 16:51:08 (885 KB/s) - Γ

ÇÿzImage-rescue-3.14-r0-dm900-20171017.bin.1ΓÇÖ saved [11648176/11648176]

root@dm900:~#

2. flash-rescue zImage-rescue-3.14-r0-dm900-20171017.bin

flash-rescue zImage-rescue-3.14-r0-dm900-20171017.bin

Warning: Could not read CA!

Warning: Please consider updating your rescue loader!

Manufacturer ID: c2

Memory type : 20

Memory density : 19

read id ok

comparing 2844 sectors...

erasing 2842 sectors...

writing 45472 pages...

verifying 2842 sectors...

flash done

root@dm900:~# ÇÿzImage-rescue-3.14-r0-dm900-20171017.bin.1ΓÇÖ saved [11648176/11648176]

plz HELP HELP

NOW the red light is permanent and unable to connect or enter recovery mode

SAME NOTHING CHANGE

Now I am able to put in recovery mode.

this is what I got

Connecting to dreamboxupdate.com (82.149.226.170:80) zImage-rescue-3.14-r 100% |***********************************************************************| 11373k 0:00:00 ETA root@dm900:~# root@dm900:~# flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2844 sectors... erasing 2045 sectors... writing 32720 pages... verifying 2045 sectors... flash done root@dm900:~# root@dm900:~# update-rescue -v Fatal: Do not run this command from rescue mode! root@dm900:~# root@dm900:~# flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2844 sectors... nothing to do root@dm900:~# root@dm900:~# update-rescue -v Fatal: Do not run this command from rescue mode! root@dm900:~#

root@dm900:~# root@dm900:~# update-rescue -v Fatal: Do not run this command from rescue mode!

stuck on red light

No, it is original. I bought it From Dream Multimedia Shop in Dubai.

any Way, using ( OptiFlasher_DMipsV3.0.5.0) I was able to bring my DM900 live again, but only using OLD images:

newinigma

openpli

dreamelit

it works on these very old images but not the new ones.

I was usinh openAtv image, it was the best, but now the dream 900 is not accepting any new image.

BTW the (OptiFlasher_DMipsV3.0.5.0) only accept images with the extension XZ

any IDEAS

regards

thank you , but my DM900 accept only this image:

dreambox-image-deb-dm900-20181119.tar.xz

any other image, it only STUCK on RED LIGHT.

I dont know what the problem is. if any body can help me.

another QUESTION: please help me install E2Iplayer (IPTV) Plugn on the above image

Does RESET FACTORY SETTING  help solving my Problem?

THESE ARE THE ONLY IMAGES MY DM900 ACCEPY

Dreambox-image-deb-dm900-20181119.tar.xz

Dream-Elite-6.0-dm900-20190225.rootfs.tar.xz

Newnigma2-deb-daily-OE2.5-dm900-25_02_2019.tar.xz

Openpli-6.2-release-dm900-20180602.rootfs.tar.xz

ANY IDEAS

thanks

thank you. I will try update my rescue loader.

just to confirm: if I use the following Command ,

wget http://dreamboxupdate.com/opendreambox/2.5/stable/images/dm900/zImage-rescue-3.14-r0-dm900-20190911.bin

flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin

apt-get update && update-rescue -v

this will update my rescue loader?

regards

after :

apt-get update && update-rescue –v

I got the following msg:

Reading package lists... Done [*] Downloading './v.sig' wget: bad address '.' Fatal: Failed to obtain signature 'v.sig'

any help

I used this image (dreambox-image-deb-dm900-20190911.tar.xz) with OPTIFLASHER

and the DM900 is LIVE again

the 3 COMMANDS were executed perfectly as follows

dm900 login: root <com/opendreambox/2.5/stable/images/dm900/zImage-rescue-3.14-r0-dm900-20190911.bin Connecting to dreamboxupdate.com (82.149.226.170:80) zImage-rescue-3.14-r 100% |***********************************************************************| 11373k 0:00:00 ETA root@dm900:~# flash-rescue zImage-rescue-3.14-r0-dm900-20190911.bin Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2844 sectors... erasing 2842 sectors... writing 45472 pages... verifying 2842 sectors... flash done root@dm900:~# update-rescue -v [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/rescue-image-dm900.bin.sig' [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/rescue-image-dm900.bin' [*] Verifying signature of 'rescue-image-dm900.bin' gpgv: Signature made Mon Dec 2 23:50:15 2019 IST using RSA key ID 7DA27561 gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>" [*] Writing rescue image to flash Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2846 sectors... erasing 2842 sectors... writing 45472 pages... verifying 2842 sectors... flash done [*] Done. root@dm900:~#

NOW I will TRY TO FLASH THE OPENATV image

I will update soon

after Flashingh the OPENAtv image ( openatv-6.4-dm900-20200308_web.tar.xz)

again STUCK on RED LIGHT

I will go back to the Oroginal image ( dreambox-image-deb-dm900-20190911.tar.xz)

but please help me with E2Iplayer

Unfortunately, the TV screen is shoimg PURE2, while the receiver in boot Loop, and the RED LIGHT FLASHING Continuously

NOT WORKING

DM900 NOT BOOTING

IS THERE any help that I can RUN thie PURE2 image?

it looks great.

but for NOW,

BACK to Dreambox-image-deb-dm900-20190911.tar

PLEASE HELP in INSTALLING E2Player

Thanx for your help