CCcam free server downloader Zoom

Quote from satelitemaniaks

, OpenAtv 7.3

openATV 7.3 = Python 3 = not working

openATV 6.4 = Python 2 = working

openATV 7.3 + Simple Zoom (klick) = working

Hi dears, I use Zoom py2 on Octagon SF8008 with OpenPli 8.3 image and somethimes the picture freezes. I try All servers and Speed servers. After downloading lines I convert them to OSCAM and restart softcam. The Oscam emu is from OpenPli plugins. Do you have the same issue like me, and what can be the solution?

Hi maldini75 .

It's quite a problem. Unfortunately.

Most of the free test CCCAM servers change their terms of use and also the website code, so it is difficult to always find a suitable and functional CCCAM free server.

I use one too (edited shell-script "tichestart1.sh"), but I have to keep changing it because there is always a new one being created. You can try it, if you want. Unzip the shell-script and follow the information in the upper part of the script. I note that this is a guide only for experienced IT users or for at least beginning Linux users !

Hi. I made minor changes in the shell script - modified items for "oscam.server" file:

- removed CAID filtering (it will be universal - i.e. for all CAIDs)

- set group to the default value of 1 everywhere

- fixed the incorrect insertion of an exclamation point in the services item, even though the services item is not necessary at all for other users

(if someone would like to remove the services item, then it is also necessary to remove the two exclamation marks listed later in the script)

- added a cccversion entry there

Minor update...

Hi where to put it?

Hi julius52 .

There is no "put" way :-).

First of all, it is unfortunately only intended for IT professionals.

EDIT: OK, you don't have to be a professional, but you have to have really good IT knowledge.

Secondly, everything is inside the shell script ;-).

no work in my dream900 with openAtv 7.5

Quote from felix dias

no work in my dream900 with openAtv 7.5

This plugin for Python 2.7 as stated by the developer while openAtv 7.5 Python 3.12.5 Naturally it doesn't work

Quote from BextrH

Hello,

Here is my new plugin for Python 2.7.

It is a single server generator.

It generates only one server per day for one IP address!

After installation, turn the plugin on and then off again. This will populate it.

Then, turn it back on. There will be an example shown on the screen.

Press OK. Use the blue button to switch to numbers on the keyboard.

Enter the number (the result of the example). Save with the green button.

In a moment, it will either show that it was unsuccessful or that it was successful along with the server line.

Please be patient. It may not work the first time. Try it multiple times.

Attention: This plugin cannot restart CAM. I have it set to simple (ncam) without a number.

It only converts for Oscam, Ncam...

Restart the CAM and check if you have the new server.

If the plugin reports "...no module named...", use the following commands.

opkg update

opkg install python-lxml

opkg install python-requests

killall -9 enigma2

ps.

I hope that by sharing this plugin here, I haven’t doomed its future functionality.

I could have kept it just for myself, but I’m giving it to you. Please try not to abuse it with greed.

Thank you.

Display More

Thank YOU. As usual great work. Any chance to have a deb file?

Hi

BextrH

Cann you please make for Python version 3.12.5. Greeting

Plugin error: no module named lxml

on my Dreambox one py2

code:

root@dreambox:~# opkg install python-lxml

Reading package lists...

Building dependency tree...

Reading state information...

E: Unable to locate package python-lxml

root@dreambox:~# opkg install python-requests

Reading package lists...

Building dependency tree...

Reading state information...

python-requests is already the newest version (2.13.0-r0.0).

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Quote from mc0807

Hi

BextrH

Cann you please make for Python version 3.12.5. Greeting

For Python 3 there is this version

https://www.linuxsat-support.com/thread/157589-simple-zoom-panel/

I installed KCCCAM on Zgemma H9SSE Python 2.7.18 today.

Had to do the opkg installs and then it appeared in Plugins.

You say "Enter the number (the result of the example)".

What number?

I think this plugin is not working as it should now.

Ended up going to website and getting the line that way and put in CCcam.cfg file.

what do you recommend buying cline

Quote from BextrH

Since the day I released the plugin (ZOOM), over the course of several years, I’ve gradually added around 80 servers to it. As of today, maybe 5 of them are still working. I don't have any new servers to add, and it’s a huge miracle when I manage to find a functioning one. Even so, the ZOOM plugin is still usable. The plugin (myKcccam) is no longer worth installing, except maybe as an inspiration for use on a similar server or for a similar function.

I don’t have direct experience with buying servers. I’ve just received some advice that it’s not worth purchasing them for a long time because they often get shut down after a while. One day, we’ll all be buying. For now, ZOOM is still working. I’m using OpenATV6.4 py2.7 +(ZOOM) ... (py3+) is not necessary for me, it brings no benefit, quite the opposite.

I'm still using it on a regular basis, and it finds around 15 servers now.

It used to be 45 a while back, but even with what it finds now, it works quite well.

Thank you for providing the plugin.It is still working where others are not.