Is it possible to edit "name-day" and insert swedish name? And if so where do i find the file?
CobaltFHD.2 OpenPLi
- ZYGA
- Thread is marked as Resolved.
-
-
Tell me, from which folder Picikon pulls up?
-
How can it be so?
image pure2
VU+ solo 4K.
On my second box it is not so but the channel list covers the entire screen
-
Hello everyone. will this skin be edited to work on py3 images? i use openvix 6. i love this skin.
CobaltFHD.3.PLI
-
I need skin CobaltFHD by fhroma OpenPLI 17-05-2021 but megadrive is death. Can put another site.
-
Code
I need skin CobaltFHD by fhroma OpenPLI 17-05-2021 but megadrive is death. Can put another sidownload from here (Thanks Fhroma)
Codehttps://uploadfile.pl/pokaz/2218749---buut.html -
Code
I need skin CobaltFHD by fhroma OpenPLI 17-05-2021 but megadrive is death. Can put another sidownload from here (Thanks Fhroma)
Codehttps://uploadfile.pl/pokaz/2218749---buut.htmltar-gz is not supported on openpli 8, do you have ipk files? thx!
-
I extracted everything to path usr. but the decoder does not start. I had to flash...
on OpenPLi 8.3
-
Skin work on python 2.......
Not fixed for python 3..... images.-
Maybe Fhroma fit it later.-
-
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3. -
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
-
Display More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation. -
Display MoreDisplay More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
-
Display MoreDisplay MoreDisplay More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
after installation go to add-ons. there, search for Cobalt Configuration (see picture). start it and choose an option (this procedure will make the box ask you to restart). after the restart, that skin cobald is visible in the settings where the skins are. you have to put in some effort.
-
Display MoreDisplay MoreDisplay MoreDisplay More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
after installation go to add-ons. there, search for Cobalt Configuration (see picture). start it and choose an option (this procedure will make the box ask you to restart). after the restart, that skin cobald is visible in the settings where the skins are. you have to put in some effort.
now it works thanks bro! but I don't see the picons, why?
-
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
after installation go to add-ons. there, search for Cobalt Configuration (see picture). start it and choose an option (this procedure will make the box ask you to restart). after the restart, that skin cobald is visible in the settings where the skins are. you have to put in some effort.
now it works thanks bro! but I don't see the picons, why?
this skin is so loaded with settings that even NASA technicians can't handle it very well.
the picons for that skin are quite large (170x240 or 220x240). in order to see the picons in the skin, you need the following.
1. picon (170x240 or 220x240)
2. in addition to the existing picon folder, another one should be created! ZZpicon folder and put picones in it.
3. if you use a USB stick, send the folders filled with picons (picon and zzpicon) to it.
3. after all this mess, the picons are visible. -
Display MoreDisplay MoreDisplay MoreDisplay More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
after installation go to add-ons. there, search for Cobalt Configuration (see picture). start it and choose an option (this procedure will make the box ask you to restart). after the restart, that skin cobald is visible in the settings where the skins are. you have to put in some effort.
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreDisplay Morethis skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
after installation go to add-ons. there, search for Cobalt Configuration (see picture). start it and choose an option (this procedure will make the box ask you to restart). after the restart, that skin cobald is visible in the settings where the skins are. you have to put in some effort.
now it works thanks bro! but I don't see the picons, why?
this skin is so loaded with settings that even NASA technicians can't handle it very well.
the picons for that skin are quite large (170x240 or 220x240). in order to see the picons in the skin, you need the following.
1. picon (170x240 or 220x240)
2. in addition to the existing picon folder, another one should be created! ZZpicon folder and put picones in it.
3. if you use a USB stick, send the folders filled with picons (picon and zzpicon) to it.
3. after all this mess, the picons are visible.in fact I saw it is very beautiful (NASA) :) I will try in case of problems I will let you know, thanks again for your help!
-
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreDisplay More
this skin works on open pli 8.3(py2).
I would like this version to be downloaded and edited to work on python3.what is the telnet command to see the installed python version?
python --version (not work)
I use Dream-explorer (it's on the official openpli 8.3 feed). when you remove it from the feed, it can be seen in the add-ons. skin is in tar.gr file.
via total commander or whatever is used, you send that skin to the temp folder.
start Dream-explorer and search for folder temp. there is that skin and run the installation.i just installed the skin with dream explorer, but i can't see the skin in the settings...
after installation go to add-ons. there, search for Cobalt Configuration (see picture). start it and choose an option (this procedure will make the box ask you to restart). after the restart, that skin cobald is visible in the settings where the skins are. you have to put in some effort.
now it works thanks bro! but I don't see the picons, why?
this skin is so loaded with settings that even NASA technicians can't handle it very well.
the picons for that skin are quite large (170x240 or 220x240). in order to see the picons in the skin, you need the following.
1. picon (170x240 or 220x240)
2. in addition to the existing picon folder, another one should be created! ZZpicon folder and put picones in it.
3. if you use a USB stick, send the folders filled with picons (picon and zzpicon) to it.
3. after all this mess, the picons are visible.Is it possible to change location in the “Kacpra, Melchiora, Baltazara” infobar?
-
I would once again ask the authors of the CobaldFHD skin to edit it to work on python3 versions of the image. thank you.
-
I would once again ask the authors of the CobaldFHD skin to edit it to work on python3 versions of the image. thank you.
in which directory should the ZZpicons folder be created?
Enigma2 skins for OpenPLI based images.
OpenPLi skins are also compatible with Cobralibero, NonSoloSat, OpenVision, SatDreamGR, SatLodge and teamBlue Enigma2 images.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
