just that also but no joy -
That link was for openvix. It won`t work on openatv.
deejay_waz try the attached version. It should work for openatv 6.3 and 6.4.
There are 98 replies in this Thread which was already clicked 14,708 times. The last Post () by jenseneverest.
just that also but no joy -
That link was for openvix. It won`t work on openatv.
deejay_waz try the attached version. It should work for openatv 6.3 and 6.4.
i use oscam-emu with mgcam (nline), where can i find the german fix??? for oscam??
Read post #23 & #27 for the oscam fix.
if i have to install mgcam where can i get the arm version, my receiver is vu+ zero 4k with latest openvix?
1.45c isn`t available for ARM processor.
hi master G thanks for your assistance.
i have tried all those fixed already and my provder said he hs performed those fixed as well and nothing. i have already posted some log from some of the channels that gets clear. if someone using oscam-emu has any lcok please share here any other findings!
thanks you all!
just that also but no joy -
That link was for openvix. It won`t work on openatv.
deejay_waz try the attached version. It should work for openatv 6.3 and 6.4.
Hi Thanks for that still doesnt work im afraid thanks for helping out!!
Im on solo 4k with atv 6.4 which oscam and configs do i need please any help would be great thanks in advance
Guys i have deleted all the irrelevant posts in this thread
Now those coming to this thread, can find the instructions on the fix they need easily
:shocking: - SORRY IF I HAVE OFFENDED ANYONE IN THE PROCESS - :shocking:
The instructions for this fix is now within the first few posts of this thread.
Please read the relevant posts and then ask questions if still unsure
Im on solo 4k with atv 6.4 which oscam and configs do i need please any help would be great thanks in advance
Have you already got oscam installed ? I am hearing there is a problem with the openATV softcam feed on the 6.4 image at the minute......
If you have oscam installed already check the first few posts of this thread on how to configure it correctly.
just that also but no joy -
That link was for openvix. It won`t work on openatv.
deejay_waz try the attached version. It should work for openatv 6.3 and 6.4.
This file didn't work for me, could anyone help me out please.
The softcam feeds where down yesterday back up today
The softcam feeds where down yesterday back up today
mine is still down, I need a working MGcamd ipk for open ATV 6.4.
Many Thanks
I'm using zgemma h9.2 and open ATV 6.3 mgcamd.
This file didn't work for me, could anyone help me out please.
That file only works on devices with a MIPS processor.
mine is still down, I need a working MGcamd ipk for open ATV 6.4.
MGCamd 1.45c isn`t available for devices with an ARM processor.
Your only option is OSCam.
I have channels which are clearing after around 10-20sec and some which don't at all.
does anyone know why this would happen?
I have channels which are clearing after around 10-20sec and some which don't at all.
does anyone know why this would happen?
Post your log mate
Hi pls see attached
Hi pls see attached
Both your provider lines look really really bad, i have no issues with any of those channels.... try my settings but it looks like we are trying to polish a turd.
Backup your current oscam.conf in case this dose not work for you, so you can go back to what you have curently....
Try my config below, reboot box after
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11578-798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
logfile = /tmp/oscam.log
clienttimeout = 7650
nice = -1
maxlogsize = 1024
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_min_ecmcount = 2
lb_force_reopen_always = 1
lb_retrylimit = 2500
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
getblockemmauprovid = 1
disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091F:000000;1841:000000;1850:000000
[cs357x]
port = 27550
[cs378x]
port = 13001
suppresscmd08 = 1
[newcamd]
port = 12121@0000:000000
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 12000
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 20
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
Display More
Please note your oscam webif will now be yourboxip :8888 ( 192.168.0.99:8888 as an example )
thanks mate will let you guys know how I get on tomorrow
Display MoreHi pls see attached
Both your provider lines look really really bad, i have no issues with any of those channels.... try my settings but it looks like we are trying to polish a turd.
Backup your current oscam.conf in case this dose not work for you, so you can go back to what you have curently....
Try my config below, reboot box after
oscam.conf
i can confirm that with this config i can get more channels open than before, i have attached the logs. threr are lots channels thats still dont open but this is better that what i had before. will it be ok you to share you entire config please? (offcourse no sensible info ;) ) im sure many here are just begginers and may have either very simple files or a mix of files from many sources trying to get a solution!!
once again thank a lot we are getting closer :)
CodeDisplay More# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11578-798 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt [global] logfile = /tmp/oscam.log clienttimeout = 7650 nice = -1 maxlogsize = 1024 block_same_ip = 0 block_same_name = 0 lb_mode = 1 lb_min_ecmcount = 2 lb_force_reopen_always = 1 lb_retrylimit = 2500 ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j getblockemmauprovid = 1 disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091F:000000;1841:000000;1850:000000 [cs357x] port = 27550 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000:000000 key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = dvbapiau read_sdt = 2 write_sdt_prov = 1 extended_cw_api = 1 boxtype = dreambox [webif] httpport = 8888 httprefresh = 10 httppollrefresh = 20 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
Please note your oscam webif will now be yourboxip :8888 ( 192.168.0.99:8888 as an example )
Display MoreHi pls see attached
Both your provider lines look really really bad, i have no issues with any of those channels.... try my settings but it looks like we are trying to polish a turd.
Backup your current oscam.conf in case this dose not work for you, so you can go back to what you have curently....
Try my config below, reboot box after
oscam.conf
CodeDisplay More# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11578-798 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt [global] logfile = /tmp/oscam.log clienttimeout = 7650 nice = -1 maxlogsize = 1024 block_same_ip = 0 block_same_name = 0 lb_mode = 1 lb_min_ecmcount = 2 lb_force_reopen_always = 1 lb_retrylimit = 2500 ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j getblockemmauprovid = 1 disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091F:000000;1841:000000;1850:000000 [cs357x] port = 27550 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000:000000 key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = dvbapiau read_sdt = 2 write_sdt_prov = 1 extended_cw_api = 1 boxtype = dreambox [webif] httpport = 8888 httprefresh = 10 httppollrefresh = 20 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
Please note your oscam webif will now be yourboxip :8888 ( 192.168.0.99:8888 as an example )
im being really thick now - but do i need to change anything to your config above to insert in to my .conf file?
but do i need to change anything to your config above to insert in to my .conf file?
No, just copy and paste it into oscam.conf. Overwriting the existing contents.
Display MoreDisplay MoreHi pls see attached
Both your provider lines look really really bad, i have no issues with any of those channels.... try my settings but it looks like we are trying to polish a turd.
Backup your current oscam.conf in case this dose not work for you, so you can go back to what you have curently....
Try my config below, reboot box after
oscam.conf
CodeDisplay More# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11578-798 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt [global] logfile = /tmp/oscam.log clienttimeout = 7650 nice = -1 maxlogsize = 1024 block_same_ip = 0 block_same_name = 0 lb_mode = 1 lb_min_ecmcount = 2 lb_force_reopen_always = 1 lb_retrylimit = 2500 ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j getblockemmauprovid = 1 disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091F:000000;1841:000000;1850:000000 [cs357x] port = 27550 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000:000000 key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = dvbapiau read_sdt = 2 write_sdt_prov = 1 extended_cw_api = 1 boxtype = dreambox [webif] httpport = 8888 httprefresh = 10 httppollrefresh = 20 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
Please note your oscam webif will now be yourboxip :8888 ( 192.168.0.99:8888 as an example )
im being really thick now - but do i need to change anything to your config above to insert in to my .conf file?
nope, copy and paste to yours. reboot
Don’t have an account yet? Register yourself now and be a part of our community!