No Data on Transponder (Timeout reading Pat) noolix - Octagon sf1008g se+ Clone

bousmate · May 3rd 2020

hi every body

I have an old demo (noolix clone of octagon SF1008g + se) that I flash with the hyprion 5.4, all went well except that I do not receive any channel, and displays no data on the transponder timeout by reading pat despite that the signal is good

I checked the cable the dish and the LNB with another demo it works

I have searched for a long time on the forums but no answer

thank you for helping me to solve this problem

excuse my english

**master G** · May 3rd 2020

PKT Hyperion 5.4 is an old image. I think there`s a good chance you need to update the satellites.xml file with recent transponder lists, or upload the latest Enigma2 settings/channel list.

bousmate · May 4th 2020

Hello,

That's what i did but didn't give any result

I think i have to change m'y image

which one you advise me

**master G** · May 4th 2020

Quote from bousmate

which one you advise me

I`ve no experience with this device, so can`t advise.

Also had a quick look around and couldn`t find any recent images to download.

Only image i could find is attached.

bousmate · May 4th 2020

thanks

i will try it

bousmate · May 4th 2020

Code

I tried this image, the problem is still the same, despite that I used the last xml satellite file
since the image detects my tuner, I think the problem is software as if a driver is missing
what do you think

**master G** · May 4th 2020

How about trying what i already suggested to upload the latest Enigma2 setting/channel list.

bousmate · May 5th 2020

I did as you suggested, I tried several files from this forum but it's still the same thing

do I have to use a specific file for my receiver or else they are the same

I apologize for being wanting to insist on my problem

**master G** · May 5th 2020

Quote from bousmate

I tried several files from this forum but it's still the same thing
do I have to use a specific file for my receiver or else they are the same

Which files did you try and how did you try to install them ?

bousmate · May 5th 2020

I used the latest files offered on the links below

VHANNIBAL E2 SETTINGS 2 + DTT

Morpheus883 Enigma2 Settings

Satvenus E2 Settings

I transfer these files to the receiver by using DreamBoxEdit

**master G** · May 5th 2020

Quote from bousmate

I transfer these files to the receiver by using DreamBoxEdit

Do these channel lists show on the receiver ? But you still get the error no data on the transponder timeout by reading pat ?

bousmate · May 5th 2020

yes these channels are displayed on the receiver, the list of satellites too,

but it still show the indication no data on the transponder timeout by reading pat

**master G** · May 5th 2020

Its possibly a hardware or driver fault on the tuner.

Do you have an old image that did work before ? Can you restore that to rule out the hardware fault ?

Is this also a spark based receiver ? If so, does the spark firmware work ?

With no more images to offer, i`m at a loss what to suggest next.

bousmate · May 6th 2020

Hi

the old images no longer worked too

maybe I screwed up the gear or lost pilots

I will continue to seek the cause

anyway thank you for your help

mohamedyehia · Jun 1st 2020

try use enigma version for usb for model hs 7110

No Data on Transponder (Timeout reading Pat) noolix - Octagon sf1008g se+ Clone

Enigma2 DVB - FBC - USB Tuners

Participate now!

Share

Similar Threads

Enigma2 ciefpsettings

Tags