Replace the file lircd.conf
Please try the solution provided by dear friend / BarviX
Replace the file lircd.conf
File with attachments
Enter the path / etc / and send it to the file in the attachments, which is the remote control file
There are 525 replies in this Thread which was already clicked 143,107 times. The last Post () by ahmed gazye.
Replace the file lircd.conf
Please try the solution provided by dear friend / BarviX
Replace the file lircd.conf
File with attachments
Enter the path / etc / and send it to the file in the attachments, which is the remote control file
openvision-enigma2-develop-extralanguage-gstreamer-python2-10.2-r268-spark_usb
openvision-enigma2-develop-extralanguage-gstreamer-python2-10.2-r268-spark_usb
Thanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it
openvision-enigma2-develop-10.2-r268-spark
We await another copy for our friends who have a 7162 processor
nice images thanks
Our dear friend / BarviX
I see that you are now connected to the topic, so I would love to hear your answer about the following
I know and have seen many copies of Enigma that you are building, and I do not know why you do not display them here in the forum. We hope that you will display all your work in the forum so that the largest number of its users benefit from the masterpieces that you build
My brother Ahmed, I will make a cover for him, God willing, with the permission of our brother Barvix
Thanks to our wonderful friend / BarviX
I installed the version on my device that has the processor 7162 on the external flash
using the plugin Nfr4X Multiboot of opennfr-5.3
The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix
To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes
I am waiting for the info that I have tried on sh4 st7111
Thanks BarviX
Remote control ok
Thanks BarviX
Thanks Persian Prince
😊😊
We would all like to thank Persian Prince & wonderful team
for wonderful works to our humble boxs, which many teams have moved away to support
We would also like to thank our wonderful friend BarviX for this wonderful work, and we expect more from him
Thanks very much mister BarviX, plus bootvideo di openvision 👍👍👍👍
Amazing mister barviX
Sh4428c920f67f.jpg sti7111
Crashes when installing turkvod
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r276-spark_usb.zip
https://runigma.com.ua/feeds/i…-r276-spark.rootfs.tar.gz
https://runigma.com.ua/feeds/i…2-10.2-r276-spark_usb.zip
Wed Dec 02, 2020 6:13 pm
spark 7162 v.276
from the site
1 -signal level is ok but no channel black screan and when search got no channel
2 -exit not working The problem was solved with a change lircd.conf
But the first problem was not solved attached to Log
Code
Open Vision enigma2 crash log
crashdate=Wed Dec 2 15:53:46 2020
compiledate=Nov 30 2020
skin=OctEtFHD/skin.xml
sourcedate=2020-11-29
branch=develop
rev=f902361
component=enigma2
stbmodel=spark7162
stbbrand=fulan
stbplatform=spark7162
kernelcmdline=console=ttyAS0,115200 rw root=/dev/sda9 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.255.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 rootdelay=9 nwhwconf=device:eth0,hwaddr:30:00:03:00:0E:4B Manufacture=Spark-Project STB_ID=0C:00:03:00:00:0E:4B
nimsockets=NIM Socket 0:
distro=openvision
oe=master
python=2.7.18
mediaservice=enigma2-plugin-systemplugins-servicemp3epl
multilib=False
architecture=sh4
socfamily=sti7105
visionversion=10.2
visionrevision=r276
visionlanguage=extralanguage
compiledby=tester1
feedsurl=http://runigma.com.ua/feeds/openvision-develop
< 117.5687> 15:46:44.3157 [eServicePeer] REMOVE Peer spark7162
< 117.5697> 15:46:44.3166 [eServicePeer] REMOVE Peer spark7162
< 126.4133> 15:46:53.1602 [eDVBScan] the current channel's ID was not corrected - not adding channel.
< 148.2003> 15:47:14.9471 [eDVBScan] the current channel's ID was not corrected - not adding channel.
< 539.2658> 15:53:46.0127 ../../git/lib/base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILED!
dmesg
xt = 87ac0b98, demux = 87ac0e9c
<4>Free session: 2
<4>Using session 2
<4>pti_hal_get_new_descrambler (42000) >
<4>pti_hal_get_new_descrambler (42001) >
<4>pti_hal_get_new_descrambler (42002) >
<4>pti_hal_get_new_descrambler (42003) >
<4>pti_hal_get_new_descrambler (42004) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>Descrambler Handler = 42000
<4>3: DeviceContext 87ac1120, DvbDemux 87ac1424, DmxDevice 87ac160c
<4>ptiInit context = 87ac1120, demux = 87ac1424
<4>Free session: 3
<4>Using session 3
<4>pti_hal_get_new_descrambler (43000) >
<4>pti_hal_get_new_descrambler (43001) >
<4>pti_hal_get_new_descrambler (43002) >
<4>pti_hal_get_new_descrambler (43003) >
<4>pti_hal_get_new_descrambler (43004) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>Descrambler Handler = 43000
<4>stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered
<4>OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0
<4>AllocatorLoadModule : Allocator device loaded
<4>Switching Preprocessor clock to full speed.
<4>OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0
<4>H264ppLoadModule : H264pp device loaded
<4>[bpamem] (bpamem_init): BPAMem driver register result = 0
<6>zram: Creating 1 devices ...
<3>bdi-block not registered
<4>[simu_button] initializing ...
<4>[simu_button] allocating and registering button device
<6>input: SH4 RC event driver for remote control as /devices/virtual/input/input1
<4>Registering device 'sc', major '169'
<4>Version of smartcard driver: [1.0.1]
<6>Open Vision 10.2-r276
<6>STB=spark7162
<6>Brand/Meta=fulan
<6>Platform=spark7162
<6>creator=Open Vision developers
<6>url=https://openvision.tech
<6>catalog=https://github.com/OpenVisionE2
<6>visionlanguage=extralanguage
<6>oe=master
<6>python=2.7.18
<6>multilib=False
<6>architecture=sh4
<6>socfamily=sti7105
<6>compiledby=tester1
<6>Adding 16376k swap on /dev/zram0. Priority:100 extents:1 across:16376k SS
<7>Found mode to set 1080p50 at 11
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>yaffs: yaffs built Nov 29 2020 13:15:17 Installing.
<6>yaffs: dev is 32505860 name is "mtdblock4" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<7>yaffs: yaffs_read_super: is_checkpointed 1
<6>NET: Registered protocol family 10
<6>input: remote control as /devices/virtual/input/input2
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>
<4>LinuxDvb:DvbPlaybackCreate: Playback 897e5a40
<7>ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<7>eth0: no IPv6 routers present
<4>
<4>LinuxDvb:DvbPlaybackDelete: Playback 897e5a40, Usage = 0
<4>DVB: adapter 0 frontend 3 frequency limits undefined - fix the driver
<4>DVB: adapter 0 frontend 3 frequency limits undefined - fix the driver
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> LinuxDvb:DvbPlaybackCreate: Playback 81232240
<4>getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 0, 0)pti_buffer_free(878d07d0, 770048) - delta 0x 0, thr 0x1
<4>freeBuffer(): free = 3
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> LinuxDvb:DvbPlaybackCreate: Playback 81232380
<4>getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 5, 19)pti_buffer_free(878d07d0, 770048) - delta 0x 0, thr 0x1
<4>freeBuffer(): free = 3
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>eth0: device MAC address 30:00:03:00:0e:4b
<6> No MAC Management Counters available
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>PHY: 0:02 - Link is Up - 100/Full
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>
<7>eth0: no IPv6 routers present
<4>
<4>
<4>[avs] avs_command_kernel > cmd = (0x05
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (5)
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>[avs] avs_command_kernel > cmd = (0x0b
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (11)
<4>[avs] avs_command_kernel > cmd = (0x1007
<4>[avs] [AVS]: avs_pio_command_kernel: AVSIOSET command
<4>[avs] [AVS]: avs_pio_set_volume (0)
<7>proc_hdmi_audio_source_write 3 - <7>pcm
<4>stmhdmiio_set_audio_source - 87990000
<4>[avs] avs_command_kernel > cmd = (0x1008
<4>[avs] [AVS]: avs_pio_command_kernel: AVSIOSET command
<4>scroll_repeats = 3
<4>scroll_delay = 150
<4>initial_scroll_delay = 1000
<4>final_scroll_delay = 1000
<7>proc_hdmi_edid_handling_write 8 - <7>[HDMI] EDID handling arg: 00000001
<7>[HDMI] EDID handling: none strict
<4>stmhdmiio_set_edid_handling - 87990000
<4>
<4>
<7>proc_hdmi_audio_source_write 3 - <7>pcm
<4>stmhdmiio_set_audio_source - 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<7>Found mode to set 1080p50 at 11
<7>Found mode to set 1080p50 at 11
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>
<4>pti_hal_set_source(): 0, 32
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 0, 1)
<7>Find spdif_bypass control at 89682a00
<4>(da 0, 2)
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x177C, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x177B, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>session 10000, slot 20004, pid 0x0012, TCIndex = 04, state = 0x4000
<4>
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x177C, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x177B, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>pti_buffer_free(878d07d0, 770048) - delta 0x 0, thr 0x1
<4>freeBuffer(): free = 3
<4>pti_hal_set_source(): 0, 32
<4>
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> TsinMode = Parallel *st-merger*
<4> getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 0, 1)
<7>Find spdif_bypass control at 89682a00
<4>(da 0, 2)
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<7>Found mode to set 720p50 at 21
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>Found mode to set 720p50 at 21
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<4>proc_denc_0_wss_write 4 - auto
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<7>Found mode to set pal at 24
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>Found mode to set pal at 24
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<4>proc_denc_0_wss_write 4 - auto
<4>[avs] avs_command_kernel > cmd = (0x05
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (5)
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<7>Found mode to set 1080p50 at 11
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>Found mode to set 1080p50 at 11
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<4>proc_denc_0_wss_write 4 - auto
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>pti_buffer_free(878d07d0, 770048) - delta 0x 0, thr 0x1
<4>freeBuffer(): free = 3
<4>nfsd: last server has exited, flushing export cache
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
T‹2,a
Display More
Thanks in advance for the help
I has been written for the team and awaits a response from one of the team members
Try this version to see if the problem exists or is solved
https://drive.google.com/open?…H_PGIvMuUTnRKHIyKUILwYWoj
Solution provided by geisivi Tester
change current bootlogo (video) by bootlogo from old versions (before 263) and now restart enigma don’t go to black screen.
Don’t have an account yet? Register yourself now and be a part of our community!