New openvision-e2-extralanguage-py2-7.6-r358-spark 7162 _usb.zip & tar.gz 05/07/2022

ref · Nov 7th 2020

No, you need to write to developers.

**ahmed gazye** · Nov 8th 2020

My friends

openvision-enigma2-develop-extralanguage-gstreamer-10.2-r254-spark 7162_usb.zip

Enjoy & Good luck

ref · Nov 8th 2020

No channel, black screan.

**ahmed gazye** · Nov 8th 2020

Quote from ref

No channel, black screan.

my friends

If there is any error in the copy, it must be written to the team on its site until the correction is done

ref · Nov 19th 2020

Quote from ahmed gazye

Quote from ref

No channel, black screan.

my friends
If there is any error in the copy, it must be written to the team on its site until the correction is done

السلام عليكم اخي الفاضل,, من فضلك هل انت تستطيع ان ترسل الرسالة الى الفريق لانني لست ماهرا لذلك.

мy friend Ahmed, can you written to the team please.

**ahmed gazye** · Nov 19th 2020

I wrote to the site many times From before

Quote from ref

Quote from ahmed gazye

Quote from ref

No channel, black screan.

my friends
If there is any error in the copy, it must be written to the team on its site until the correction is done

السلام عليكم اخي الفاضل,, من فضلك هل انت تستطيع ان ترسل الرسالة الى الفريق لانني لست ماهرا لذلك.
мy friend Ahmed, can you written to the team please.

Display More

**ahmed gazye** · Nov 22nd 2020

My friends

openvision-enigma2-develop-extralanguage-gstreamer-10.2-r262-spark 7162_usb.zip

https://runigma.com.ua/feeds/i…2-spark7162.rootfs.tar.gz

https://runigma.com.ua/feeds/i….2-r262-spark7162_usb.zip

Enjoy & Good luck

sherif · Nov 23rd 2020

same previous one no channel black screen thanks

**ahmed gazye** · Nov 26th 2020

Thanks to our wonderful friend / BarviX

We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it

Please thank our dear friend / BarviX for compiling this image & try it

openvision-enigma2-develop-10.2-r268-spark

We await another copy for our friends who have a 7162 processor

I installed the version on my device that has the processor 7162 on the external flash

using the plugin Nfr4X Multiboot of opennfr-5.3

The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix

To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes

Enjoy & Good luck

angel_heart · Nov 27th 2020

Dear Ahmed

it is working on my Spark 7162 (Truman top box-2 tuner)

thanks for you and BarviX for his efforts

95230db7da348668b662e3cfb.jpg

b6cdfc5bbc5d7cc69e0b0a76.jpg

Quote from ahmed gazye

Thanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it

openvision-enigma2-develop-10.2-r268-spark

We await another copy for our friends who have a 7162 processor

I installed the version on my device that has the processor 7162 on the external flash
using the plugin Nfr4X Multiboot of opennfr-5.3
The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix
To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes

Enjoy & Good luck

Display More

ref · Nov 28th 2020

Unfortunatelli for me not working on amiko alien2.

**ahmed gazye** · Nov 30th 2020

My friends

openvision-enigma2-develop-extralanguage-gstreamer-10.2-r276-spark 7162_usb.zip

https://runigma.com.ua/feeds/i…6-spark7162.rootfs.tar.gz

https://runigma.com.ua/feeds/i….2-r276-spark7162_usb.zip

Enjoy & Good luck

ref · Dec 1st 2020

THE BEST!

**ahmed gazye** · Dec 2nd 2020

Re: Test images Open Vision 10.2

Post: # 11659Post ahmed gazye

Wed Dec 02, 2020 6:13 pm

spark 7162 v.276

from the site

https://runigma.com.ua/

1 -signal level is ok but no channel black screan and when search got no channel

2 -exit not working The problem was solved with a change lircd.conf

But the first problem was not solved attached to Log

Code: Select all

Code

Open Vision enigma2 crash log

crashdate=Wed Dec  2 15:53:46 2020
compiledate=Nov 30 2020
skin=OctEtFHD/skin.xml
sourcedate=2020-11-29
branch=develop
rev=f902361
component=enigma2

stbmodel=spark7162
stbbrand=fulan
stbplatform=spark7162
kernelcmdline=console=ttyAS0,115200 rw root=/dev/sda9 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.255.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 rootdelay=9 nwhwconf=device:eth0,hwaddr:30:00:03:00:0E:4B Manufacture=Spark-Project STB_ID=0C:00:03:00:00:0E:4B
nimsockets=NIM Socket 0:
distro=openvision
oe=master
python=2.7.18
mediaservice=enigma2-plugin-systemplugins-servicemp3epl
multilib=False
architecture=sh4
socfamily=sti7105
visionversion=10.2
visionrevision=r276
visionlanguage=extralanguage
compiledby=tester1
feedsurl=http://runigma.com.ua/feeds/openvision-develop


<   117.5687> 15:46:44.3157 [eServicePeer] REMOVE Peer spark7162
<   117.5697> 15:46:44.3166 [eServicePeer] REMOVE Peer spark7162
<   126.4133> 15:46:53.1602 [eDVBScan] the current channel's ID was not corrected - not adding channel.
<   148.2003> 15:47:14.9471 [eDVBScan] the current channel's ID was not corrected - not adding channel.
<   539.2658> 15:53:46.0127 ../../git/lib/base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILED!


dmesg

xt = 87ac0b98, demux = 87ac0e9c
<4>Free session: 2
<4>Using session 2
<4>pti_hal_get_new_descrambler (42000) >
<4>pti_hal_get_new_descrambler (42001) >
<4>pti_hal_get_new_descrambler (42002) >
<4>pti_hal_get_new_descrambler (42003) >
<4>pti_hal_get_new_descrambler (42004) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>Descrambler Handler = 42000
<4>3: DeviceContext 87ac1120, DvbDemux 87ac1424, DmxDevice 87ac160c
<4>ptiInit context = 87ac1120, demux = 87ac1424
<4>Free session: 3
<4>Using session 3
<4>pti_hal_get_new_descrambler (43000) >
<4>pti_hal_get_new_descrambler (43001) >
<4>pti_hal_get_new_descrambler (43002) >
<4>pti_hal_get_new_descrambler (43003) >
<4>pti_hal_get_new_descrambler (43004) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>pti_hal_get_new_descrambler (-8) >
<4>Descrambler Handler = 43000
<4>stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered
<4>OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0
<4>AllocatorLoadModule : Allocator device loaded
<4>Switching Preprocessor clock to full speed.
<4>OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0
<4>H264ppLoadModule : H264pp device loaded
<4>[bpamem] (bpamem_init): BPAMem driver register result = 0
<6>zram: Creating 1 devices ...
<3>bdi-block not registered
<4>[simu_button] initializing ...
<4>[simu_button] allocating and registering button device
<6>input: SH4 RC event driver for remote control as /devices/virtual/input/input1
<4>Registering device 'sc', major '169'
<4>Version of smartcard driver: [1.0.1]
<6>Open Vision 10.2-r276
<6>STB=spark7162
<6>Brand/Meta=fulan
<6>Platform=spark7162
<6>creator=Open Vision developers
<6>url=https://openvision.tech
<6>catalog=https://github.com/OpenVisionE2
<6>visionlanguage=extralanguage
<6>oe=master
<6>python=2.7.18
<6>multilib=False
<6>architecture=sh4
<6>socfamily=sti7105
<6>compiledby=tester1
<6>Adding 16376k swap on /dev/zram0.  Priority:100 extents:1 across:16376k SS
<7>Found mode to set 1080p50 at 11
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>yaffs: yaffs built Nov 29 2020 13:15:17 Installing.
<6>yaffs: dev is 32505860 name is "mtdblock4" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<7>yaffs: yaffs_read_super: is_checkpointed 1
<6>NET: Registered protocol family 10
<6>input: remote control as /devices/virtual/input/input2
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>
<4>LinuxDvb:DvbPlaybackCreate: Playback 897e5a40
<7>ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<7>eth0: no IPv6 routers present
<4>
<4>LinuxDvb:DvbPlaybackDelete: Playback 897e5a40, Usage = 0
<4>DVB: adapter 0 frontend 3 frequency limits undefined - fix the driver
<4>DVB: adapter 0 frontend 3 frequency limits undefined - fix the driver
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    LinuxDvb:DvbPlaybackCreate: Playback 81232240
<4>getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 0, 0)pti_buffer_free(878d07d0, 770048) - delta 0x       0, thr 0x1
<4>freeBuffer(): free = 3
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    LinuxDvb:DvbPlaybackCreate: Playback 81232380
<4>getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 5, 19)pti_buffer_free(878d07d0, 770048) - delta 0x       0, thr 0x1
<4>freeBuffer(): free = 3
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>eth0: device MAC address 30:00:03:00:0e:4b
<6> No MAC Management Counters available
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>PHY: 0:02 - Link is Up - 100/Full
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>
<7>eth0: no IPv6 routers present
<4>
<4>
<4>[avs] avs_command_kernel > cmd = (0x05
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (5)
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>[avs] avs_command_kernel > cmd = (0x0b
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (11)
<4>[avs] avs_command_kernel > cmd = (0x1007
<4>[avs] [AVS]: avs_pio_command_kernel: AVSIOSET command
<4>[avs] [AVS]: avs_pio_set_volume (0)
<7>proc_hdmi_audio_source_write 3 - <7>pcm
<4>stmhdmiio_set_audio_source - 87990000
<4>[avs] avs_command_kernel > cmd = (0x1008
<4>[avs] [AVS]: avs_pio_command_kernel: AVSIOSET command
<4>scroll_repeats = 3
<4>scroll_delay = 150
<4>initial_scroll_delay = 1000
<4>final_scroll_delay = 1000
<7>proc_hdmi_edid_handling_write 8 - <7>[HDMI] EDID handling arg: 00000001
<7>[HDMI] EDID handling: none strict
<4>stmhdmiio_set_edid_handling - 87990000
<4>
<4>
<7>proc_hdmi_audio_source_write 3 - <7>pcm
<4>stmhdmiio_set_audio_source - 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<7>Found mode to set 1080p50 at 11
<7>Found mode to set 1080p50 at 11
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>
<4>pti_hal_set_source(): 0, 32
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 0, 1)
<7>Find spdif_bypass control at 89682a00
<4>(da 0, 2)
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x177C, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x177B, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>session 10000, slot 20004, pid 0x0012, TCIndex = 04, state = 0x4000
<4>
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x177C, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x177B, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>pti_buffer_free(878d07d0, 770048) - delta 0x       0, thr 0x1
<4>freeBuffer(): free = 3
<4>pti_hal_set_source(): 0, 32
<4>
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<4>[TSM] reinit stream routing...
<4>Bypass ci
<4>reinit
<4>>>Init st7105 DVBT-USB
<4>TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    TsinMode = Parallel *st-merger*
<4>    getBuffer(): free = 3
<4>pti_buffer_get(770048) => 878d07d0
<4>(da 0, 1)
<7>Find spdif_bypass control at 89682a00
<4>(da 0, 2)
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>session 10000, slot 20003, pid 0x0000, TCIndex = 03, state = 0x4000
<4>
<4>session 10000, slot 20000, pid 0x0014, TCIndex = 00, state = 0x4000
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<7>Found mode to set 720p50 at 21
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>Found mode to set 720p50 at 21
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<4>proc_denc_0_wss_write 4 - auto
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<7>Found mode to set pal at 24
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>Found mode to set pal at 24
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<4>proc_denc_0_wss_write 4 - auto
<4>[avs] avs_command_kernel > cmd = (0x05
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (5)
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<7>Found mode to set 1080p50 at 11
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>stmfb: Starting HDMI Output hdmi = 87990000
<7>Found mode to set 1080p50 at 11
<4>[avs] avs_command_kernel > cmd = (0x0a
<4>[avs] [AVS]: avs_pio_command_kernel: SAA command (10)
<4>[avs] [AVS]: avs_pio_set_wss
<4>proc_denc_0_wss_write 4 - auto
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>
<4>session 10000, slot 20001, pid 0x010F, TCIndex = 01, state = 0x4000
<4>session 10000, slot 20002, pid 0x010E, TCIndex = 02, state = 0x4000
<4>pti_buffer_free(878d07d0, 770048) - delta 0x       0, thr 0x1
<4>freeBuffer(): free = 3
<4>nfsd: last server has exited, flushing export cache
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
T‹2,a

Display More

Thanks in advance for the help

**ahmed gazye** · Dec 2nd 2020

I has been written for the team and awaits a response from one of the team members

Try this version to see if the problem exists or is solved

https://drive.google.com/open?…NLm2xDfWb-uyKxR7XfWI06-sl

Solution provided by geisivi Tester

change current bootlogo (video) by bootlogo from old versions (before 263) and now restart enigma don’t go to black screen.

Enjoy & Good luck

telo2002 · Dec 3rd 2020

Code

share bootlogo (video) from older versions (up to 263)

**ahmed gazye** · Dec 3rd 2020

My friends

openvision-enigma2-develop-extralanguage-gstreamer-10.2-r280-spark 7162_usb.zip

https://runigma.com.ua/feeds/i…0-spark7162.rootfs.tar.gz

https://runigma.com.ua/feeds/i….2-r280-spark7162_usb.zip

Enjoy & Good luck

telo2002 · Dec 3rd 2020

no channel black screen((((

**ahmed gazye** · Dec 3rd 2020

Dear brothers

There are two problems with the version, they are

1 -signal level is ok but no channel black screan and when search got no channel

2 -exit not working The problem was solved with a change lircd.conf extension etc (With attachments)

But the first problem was not solved

brother / abdul rois ran the copy on his device 7111 Knowing the solution to the problem is underway

ref · Dec 3rd 2020

I has been written for the team and awaits a response from one of the team members

Try this version to see if the problem exists or is solved

https://drive.google.com/open?…NLm2xDfWb-uyKxR7XfWI06-sl

Solution provided by geisivi Tester

change current bootlogo (video) by bootlogo from old versions (before 263) and now restart enigma don’t go to black screen.

Enjoy & Good luck

Ok, but where is bootlogo in openvision?

I know how to fix exit button and stendbay but I don't know how to replace the bootlogo. Please help me. This image is great, thanks to the team. The earlier versions worked well for me on the internal flash of amiko alien 2, but on the new versions is a black screen unfortunately.

I am sorry but I do not know to delete empty space in thiis post.

New openvision-e2-extralanguage-py2-7.6-r358-spark 7162 _usb.zip & tar.gz 05/07/2022

ahmed gazye Nov 8th 2020

ahmed gazye Nov 22nd 2020

ahmed gazye Nov 26th 2020

ahmed gazye Nov 30th 2020

ahmed gazye Nov 30th 2020

Re: Test images Open Vision 10.2

ahmed gazye Dec 2nd 2020

ahmed gazye Dec 3rd 2020

ahmed gazye Dec 3rd 2020

Spark STI 7162 Images

Participate now!

Share

Tags