downloaded from the team then where it goes dont know . even when you try to remove plugins none shown there the oscam emus which i downloaded from the team and cccam which i installed from usb . not in var keys no cfg files found nothing . pls share a picture
New openvision-e2-extralanguage-py2-7.6-r358-spark 7162 _usb.zip & tar.gz 05/07/2022
-
- Spark 7162 Open Vision
- ahmed gazye
- Closed
- Thread is marked as Resolved.
There are 408 replies in this Thread which was already clicked 101,183 times. The last Post () by ahmed gazye.
-
-
sorry that was wrong posting my bad , i used your guide to remove enigma but then i installed openpli 7 from other post , in that image there softcams not working.
-
Hi!
I don't know if you have fixed your problem, if not, have you tried to remove the content of oscam.dvbapi??
When i configure oscam, i have to remove the content of that file or oscam doesn't work.
-
no i havet fixed it yet , it is hard to configure oscam . After installing from plugins i go in softcam setup pressing right left buttons dnt show up or if i go by pressing red button to remove plugins its not show up there any softcam mgcam oscam etc etc. openpli 7.3 was a treat for users like me install cccam edit cfg there u go......
-
I flashed this image but in the phase of configuration the button EXIT no works :(
It happens to you on the Amiko Alien 2 ?
-
Hi!
I don't know if you have fixed your problem, if not, have you tried to remove the content of oscam.dvbapi??
When i configure oscam, i have to remove the content of that file or oscam doesn't work.
please tell what content to be removed ?
-
I flashed this image but in the phase of configuration the button EXIT no works :(
It happens to you on the Amiko Alien 2 ?
This problem is fixed on this forum, you have to change ETC folder with the ETC folder posted in past threads and change stmdvb.ko, i don't know exactly the number of the thread, around 3-5 i think.
Hi!
I don't know if you have fixed your problem, if not, have you tried to remove the content of oscam.dvbapi??
When i configure oscam, i have to remove the content of that file or oscam doesn't work.
please tell what content to be removed ?
If you go to your oscam files by ftp, you have to go /etc/tuxbox/ open your oscam folder/config. Then open the file "oscam.dvbapi" and remove the content, leave it blank. Then restart oscam and check if oscam works.
-
there ia aproblem with the time not change
-
Please notice
Do not download any copy until version 358, it all has a problem with the remote and the image andI wrote to the team to fix
park 7111& 7162 openvision 10.2-r358
The version was installed on the external flash drive spark 7162 by NFR4XBoot plugin
but The remote control not works
Must use the special openwebif remote to complete the settings , but the exit button does not work and causes crushing
Lircd.conf has changedby Attachment the remote works but jumps
When working on any channel, crash occurs in the version
Crush logo
Code
Display MoreCode: Select all Code Open Vision enigma2 crash log crashdate=Mon Feb 22 17:27:07 2021 compiledate=Feb 22 2021 skin=OctEtFHD/skin.xml sourcedate=2021-02-22 branch=develop rev=f5da4e7 component=Enigma2 stbmodel=spark stbbrand=fulan stbplatform=spark kernelcmdline=console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:30:00:03:00:0E:4B Manufacture=Spark-Project STB_ID=0C:00:03:00:00:0E:4B nimsockets=NIM Socket 0: distro=openvision oe=master python=2.7.18 mediaservice=enigma2-plugin-systemplugins-servicemp3 multilib=False architecture=sh4 socfamily=sti7111 visionversion=10.2 visionrevision=r358 visionlanguage=extralanguage compiledby=persianpros feedsurl=http://openvision/feeds/openvision < 409.3005> 17:27:07.7759 [ePyObject] (CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x2ead4f4c>>,('OkCancelActions', 'ok')) failed) dmesg locating and registering button device <6>input: TDT RC event driver as /devices/virtual/input/input0 <4>Fulan front panel driver <4>VfdType = 2 <4>CpuType = 2 <4>DisplayInfo = 1 <4>scankeyNum = 8 <4>swMajorVersion = 1 <4>swSubVersion = 10 <4>stby key 0 = 9966da25 <4>stby key 1 = 11eeda25 <4>stby key 2 = 44bbb24d <4>stby key 3 = a25d7887 <4>stby key 4 = 00000000 <4>blue key 0 = 996640bf <4>blue key 1 = 11ee40bf <4>blue key 2 = 44bbb847 <4>blue key 3 = a25d52ad <4>blue key 4 = 00000000 <6>input: fulan front panel buttons as /devices/virtual/input/input1 <6>aotom-rtc aotom-rtc: rtc core: registered aotom as rtc0 <7>aotom_rtc_probe 88e00400 <7>aotom_rtc_probe 2 <4>stmfb: fb0 parameters = "1280x720-32@50:16m:pal:yuv:yuv" <7>stmfb: Starting HDMI Output hdmi = 88ea0000 <4>stmfb: fb1 parameters = "<NULL>" <4>Init of MME log wrapper <4>stm_v4l2_register_driver: driver 'stmvout' registered <4>stm_v4l2_register_driver: driver 'stmvbi' registered <6>snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw <6>pseudocard: 1 pseudo soundcard(s) found <4>pti: module license 'NO' taints kernel. <4>Disabling lock debugging due to kernel taint <4>pti loaded (videoMem = 4096, waitMS = 20, enableStatistic = 0) <4>no swts ->routing streams from dvr0 direct to the player <6>DVB: registering new adapter (STM Streamer) <4>0: DeviceContext 88f1a088, DvbDemux 88f1a38c, DmxDevice 88f1a574 <7>CaInit() <7>Initializing CI Controller <4>ptiInit context = 88f1a088, demux = 88f1a38c <4>[TSM] init stream routing... <4>Load real TC Code <4>TC_Data = fe238000, TC_Code = fe23c000 <4>Readback TC ... successfull <4>using videoMem = 770048 (packets = 4096) <4>pti: pti_buffer_pool_init: allocate 188 pages (770048 bytes) <4>DMA(0) base = 4ad80000, top = 4ae3c000, buffer = 4ad80000, size 770048 <4>freeBuffer(): free = 1 <4>pti: pti_buffer_pool_init: allocate 188 pages (770048 bytes) <4>DMA(1) base = 4ae3c000, top = 4aef8000, buffer = 4ae3c000, size 770048 <4>freeBuffer(): free = 2 <4>pti: pti_buffer_pool_init: allocate 188 pages (770048 bytes) <4>DMA(2) base = 4aef8000, top = 4afb4000, buffer = 4aef8000, size 770048 <4>freeBuffer(): free = 3 <4>Validity = 0x0001 Mode = 0x0000 <4>pti_task: using 3 dma channel <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>Validity = 0x0001 Mode = 0x0000 <4>Validity = 0x0003 Mode = 0x0000 <4>pI2c = 0x89675c18 <4>DVB: registering adapter 0 frontend 3 (Dummy DVB-T)... <4>pI2c = 0x89675e18 <4>spark_dvb_attach_s: d3501 attached <4>ix7306_write ucIOBuffer 4 Err = 0 <4>ix7306_write ucIOBuffer 1 Err = 0 <4>ix7306_write ucIOBuffer Err 2 = 0 <4>ix7306_read Err = 0 ucData = 0x18 <4>========tuner_sharp7306_identify ===== <4>tuner_Sharp7306 is Identified <4>ix7306_attach: Attaching Sharp BS2S7HZ7306A IX7306 8PSK/QPSK tuner <4>spark_dvb_attach_s: IX7306 attached <4>DVB: registering adapter 0 frontend 1 (Tuner1-Sat)... <4>pI2c = 0x89675a18 <4>spark_dvb_attach_s: d3501 attached <4>ix7306_write ucIOBuffer 4 Err = 0 <4>ix7306_write ucIOBuffer 1 Err = 0 <4>ix7306_write ucIOBuffer Err 2 = 0 <4>ix7306_read Err = 0 ucData = 0x18 <4>========tuner_sharp7306_identify ===== <4>tuner_Sharp7306 is Identified <4>ix7306_attach: Attaching Sharp BS2S7HZ7306A IX7306 8PSK/QPSK tuner <4>spark_dvb_attach_s: IX7306 attached <4>DVB: registering adapter 0 frontend 0 (Tuner2-Sat)... <4>Free session: 0 <4>Using session 0 <4>pti_hal_get_new_descrambler (40000) > <4>pti_hal_get_new_descrambler (40001) > <4>pti_hal_get_new_descrambler (40002) > <4>pti_hal_get_new_descrambler (40003) > <4>pti_hal_get_new_descrambler (40004) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>Descrambler Handler = 40000 <4>install_e2_procs(): entry already in use 'progress' <4>install_e2_procs(): entry already in use 'stb/fp/was_timer_wakeup' <4>1: DeviceContext 88f1a614, DvbDemux 88f1a918, DmxDevice 88f1ab00 <7>CaInit() <4>ptiInit context = 88f1a614, demux = 88f1a918 <4>Free session: 1 <4>Using session 1 <4>pti_hal_get_new_descrambler (41000) > <4>pti_hal_get_new_descrambler (41001) > <4>pti_hal_get_new_descrambler (41002) > <4>pti_hal_get_new_descrambler (41003) > <4>pti_hal_get_new_descrambler (41004) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>Descrambler Handler = 41000 <4>2: DeviceContext 88f1aba0, DvbDemux 88f1aea4, DmxDevice 88f1b08c <7>CaInit() <4>ptiInit context = 88f1aba0, demux = 88f1aea4 <4>Free session: 2 <4>Using session 2 <4>pti_hal_get_new_descrambler (42000) > <4>pti_hal_get_new_descrambler (42001) > <4>pti_hal_get_new_descrambler (42002) > <4>pti_hal_get_new_descrambler (42003) > <4>pti_hal_get_new_descrambler (42004) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>Descrambler Handler = 42000 <4>3: DeviceContext 88f1b12c, DvbDemux 88f1b430, DmxDevice 88f1b618 <4>ptiInit context = 88f1b12c, demux = 88f1b430 <4>Free session: 3 <4>Using session 3 <4>pti_hal_get_new_descrambler (43000) > <4>pti_hal_get_new_descrambler (43001) > <4>pti_hal_get_new_descrambler (43002) > <4>pti_hal_get_new_descrambler (43003) > <4>pti_hal_get_new_descrambler (43004) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>pti_hal_get_new_descrambler (-8) > <4>Descrambler Handler = 43000 <4>stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered <4>OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0 <4>AllocatorLoadModule : Allocator device loaded <4>Switching Preprocessor clock to full speed. <4>OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0 <4>H264ppLoadModule : H264pp device loaded <4>(bpamem_init): BPAMem driver register result = 0 <6>zram: Creating 1 devices ... <4>Registering device 'sc', major '169' <4>Version of smartcard driver: [1.0.1] <6>Adding 16376k swap on /dev/zram0. Priority:100 extents:1 across:16376k SS <4>LinuxDvb:DvbPlaybackCreate: Playback 870ed9a0 <7>yaffs: yaffs built Aug 8 2020 23:17:41 Installing. <6>yaffs: dev is 32505860 name is "mtdblock4" rw <6>yaffs: passed flags "" <7>yaffs: yaffs: Attempting MTD mount of 31.4,"mtdblock4" <7>yaffs: yaffs_read_super: is_checkpointed 1 <4> <6>input: lircd as /devices/virtual/input/input2 <4>LinuxDvb:DvbPlaybackDelete: Playback 870ed9a0, Usage = 0 <4>LinuxDvb:DvbPlaybackCreate: Playback 8722fb40 <4>aotom_write_rtc 11 - aotom_write_rtc -> 1614014650 <4> <4>VFD/AOTOM: unknown IOCTL 0x1015 <4>DVB: adapter 0 frontend 3 frequency limits undefined - fix the driver <4>DVB: adapter 0 frontend 3 frequency limits undefined - fix the driver <4>dtv_property_dump: tvp.cmd = 0x0000002c undefined <4>dtv_property_dump: tvp.cmd = 0x0000002c undefined <4>dtv_property_dump: tvp.cmd = 0x0000002c undefined <7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1) <7>[TSM] reinit stream routing... <4>getBuffer(): free = 3 <4>pti_buffer_get(770048) => 88ed1ad0 <4>(da 0, 0)pti_buffer_free(88ed1ad0, 770048) - delta 0x 0, thr 0x1 <4>freeBuffer(): free = 3 <7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1) <7>[TSM] reinit stream routing... <4>LinuxDvb:DvbPlaybackCreate: Playback 8722f280 <4>getBuffer(): free = 3 <4>pti_buffer_get(770048) => 88ed1ad0 <4>(da 5, 19)pti_buffer_free(88ed1ad0, 770048) - delta 0x 0, thr 0x1 <4>freeBuffer(): free = 3 <4>failed to get output window -22 <4>failed to set output window -22 <4>failed to get output window -22 <4>failed to set output window -22 <4>failed to get output window -22 <4>failed to set output window -22 <4>failed to get output window -22 <4>failed to set output window -22 <4> <4> <4> <4>proc_denc_0_wss_write 4 - auto <7>proc_hdmi_audio_source_write 3 - <7>pcm <7>stmhdmiio_set_audio_source - 88ea0000 <7>proc_hdmi_edid_handling_write 8 - <7>[HDMI] EDID handling arg: 00000001 <7>[HDMI] EDID handling: none strict <7>stmhdmiio_set_edid_handling - 88ea0000 <4>aotom_write_rtc_offset 4 - aotom_write_rtc_offset -> 7200 <4> offset: 7200 <7>proc_hdmi_audio_source_write 3 - <7>pcm <7>stmhdmiio_set_audio_source - 88ea0000 <7>stmfb: Starting HDMI Output hdmi = 88ea0000 <4>proc_denc_0_wss_write 4 - auto <4>proc_denc_0_wss_write 4 - auto <4>proc_denc_0_wss_write 4 - auto <4>proc_denc_0_wss_write 4 - auto <7>Found mode to set 1080p50 at 11 <7>stmfb: Starting HDMI Output hdmi = 88ea0000 <7>stmfb: Starting HDMI Output hdmi = 88ea0000 <7>Found mode to set 1080p50 at 11 <4>proc_denc_0_wss_write 4 - auto <4> <4> <4> <4> <4> <4> <4> <4> <4> <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4> <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4> <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4> <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4> <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4>failed to get output window -22 <4> <4>
Wait, the download will be from the thread when the version is valid -
Open Vision 10.2 r358 enigma2 image spark 7162 usb.zip & tar.gz 23/2/2021
The version compiling by Persian Prince todayThe version works perfectly
Thanks him and his team
My friends
openvision-e2-extralanguage-py2-10.2-r358-spark 7162
https://download1591.mediafire….2-r358-spark7162_usb.zip
https://download941.mediafire.…0.2-r358-spark7162.tar.gz
Image of my device processor 7162
-
ahmed gazye
Changed the title of the thread from “Open Vision 10.2 r313 enigma2 image spark 7162 usb.zip & tar.gz 26/12/2020” to “Open Vision 10.2 r360 enigma2 image spark 7162 usb.zip & tar.gz 25/2/2021”. -
Open Vision 10.2 r360 enigma2 image spark 7162 usb.zip & tar.gz 25/2/2021
The version compiling by Persian Prince todayHe stated that he had integrated the SH4MultiBoot plugin
I did not try the version because it was only downloaded now
Thanks him and his team
My friends
openvision-e2-extralanguage-py2-10.2-r360-spark 7162
https://download1326.mediafire….2-r360-spark7162_usb.zip
https://download1584.mediafire…0.2-r360-spark7162.tar.gz
-
-
Hello Ahmed Gazye, i installed OV version 358 if i do bakcup system setting then install OV version 360 and then restore system settings will i have chsnnels bouquets and plugins and will it work properly on the new version 360?
-
Hello Ahmed Gazye, i installed OV version 358 if i do bakcup system setting then install OV version 360 and then restore system settings will i have chsnnels bouquets and plugins and will it work properly on the new version 360?
Yes, it will work, God willing
-
Download not available
This file can not be downloaded because there was a problem with the upload. If possible, contact the person uploading the file to ask them to upload it again.
-
Download not available
This file can not be downloaded because there was a problem with the upload. If possible, contact the person uploading the file to ask them to upload it again.
The version is constantly evolving
Persian Prince delete After 24 hours To download copies for other devices you was late downloading,
wait for the next version
-
ahmed gazye
Changed the title of the thread from “Open Vision 10.2 r360 enigma2 image spark 7162 usb.zip & tar.gz 25/2/2021” to “Open Vision 10.2 r363 enigma2 image spark 7162 usb.zip & tar.gz 27/2/2021”. -
Open Vision 10.2 r363 enigma2 image spark 7162 usb.zip & tar.gz 27/2/2021
The version compiling by Persian Prince todayMy friends
openvision-e2-extralanguage-py2-10.2-r363-spark 7162
https://download1477.mediafire…park7162_multiboot.tar.gz
https://download1646.mediafire….2-r363-spark7162_usb.zip
-
ahmed gazye
Changed the title of the thread from “Open Vision 10.2 r363 enigma2 image spark 7162 usb.zip & tar.gz 27/2/2021” to “Open Vision 10.2 r365 enigma2 image spark 7162 usb.zip & tar.gz 1/3/2021”. -
Open Vision 10.2 r365 enigma2 image spark 7162 usb.zip & tar.gz 1/3/2021
The version compiling by Persian Prince todayMy friends
openvision-e2-extralanguage-py2-10.2-r365-spark 7162
https://download1479.mediafire…park7162_multiboot.tar.gz
https://download1980.mediafire….2-r365-spark7162_usb.zip
-
Persian Prince Wrote this today
Post: # 12902Post Persian Prince
Mon Mar 01, 2021 10:07 pm
As we don't have any SH4 model in our team I share the soures with you to improve it if you can.
Please share your changes/fixes with us so we apply them to the next releases.
It's based on NFR4X plugin.
Good luck
Attachments
SH4MultiBoot-sources.zip
(66.08 KiB) Downloaded 5 timesWe invite Mr. Muhammad Al-Safty (angel_heart ) who has previously modified the plugin to send the amendment to the team or / Persian Prince . We also invite the friend, BarviX, or anyone with experience to do so by sending any modification to / Persian Prince
in order for Sh4 device owners to benefit from the modifications
At the following link
https://forum.openvision.tech/…ic.php?f=7&p=12902#p12902
-
Display More
Persian Prince Wrote this today
Post: # 12902Post Persian Prince
Mon Mar 01, 2021 10:07 pm
As we don't have any SH4 model in our team I share the soures with you to improve it if you can.
Please share your changes/fixes with us so we apply them to the next releases.
It's based on NFR4X plugin.
Good luck
Attachments
SH4MultiBoot-sources.zip
(66.08 KiB) Downloaded 5 timesWe invite Mr. Muhammad Al-Safty (angel_heart ) who has previously modified the plugin to send the amendment to the team or / Persian Prince . We also invite the friend, BarviX, or anyone with experience to do so by sending any modification to / Persian Prince
in order for Sh4 device owners to benefit from the modifications
At the following link
https://forum.openvision.tech/…ic.php?f=7&p=12902#p12902
Dear Mr. Ahmed and all friends
After working on great image NFR version 5.1 on the internal flash, which allows me to run more than one image on the external flash without installing problems, like the other versions 4.3, 5.3, 6.4 or 6.5 for my old device (Top Box 2 Tuner 7162)
I wanted to upgrade it because it comes with an error message to me. I can't add more than 10 copies
But this may be in order to preserve the internal copy or the device. This is the opinion of the plugin programmer
So I modified the professional plugin nfr4xboot 1.00 to make more than 10 copies
This is a risk , but it is my responsibility with my device, and you are completely free to implement this according to the capacity of the device or the flash that bears all the copies on it.
I hope that helps the team in the great image openvision
Accept my regards / Muhammad Al-Safty
Spark STI 7162 Images
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
