Did you try to flash this image?
please flash this Image "without SSL89" only image, give it a try
Did you try to flash this image?
please flash this Image "without SSL89" only image, give it a try
Then boot box
Strangely slowly comes the thought that it is not an ORIGINAL
please try this Bootloader and after this image (again for ORIGINAL) unrar it hope will work
normal if you flash over DreamUp, DreamUp (Japhar Flasher) put alone right SSL in flash, why here not don`t understand
of course reboot after flashing
There were never a DM500HDv2 clone.
So IT is an original. You can glas the sdl88 or ssl89 to the box.
As i wrote try a new Power Splly / PSU, as it seems to have difficulties to write to the flash chip. The SSL you see with ??? is the one the JapharFlasher loads into the RAM of the box, this then allows to write into the flash chip.
There is 2 possible cases... the PSU doesnt gives enough power / Amp to the box to write the flash or the flash chip (or the power to that chip) is defective.
The box is 100% potentially working, if its only a PSU problem its easy to solve, if its related to the flash chip then contact Johnny, the hardware DM Guru.
Emo
I have seen this problem before with dm500v2.
Send the box to an approved dreambox dealer, they can fix this.
There are approved dreambox dealers in most countries.
I have seen this problem before with dm500v2.
Send the box to an approved dreambox dealer, they can fix this.
There are approved dreambox dealers in most countries.
It just depends of how much it will cost...
Emo
The box is definitely not broken. I think it's a user error.
Please take the DreamUp (unrar it) put "restore bad sectors" in Attachment, then flash Bootloader 89 first and then immediately the image.
Let's hope it works. Good luck
Image:
Hello, after trying multiple images multiple times and booting 88 and 89, it has now worked.
openesi image 8.6 and boot 89.
Thank you very much everyone for the help
https://photos.app.goo.gl/pp5BwvcfaArpbcgc7https://photos.app.goo.gl/pp5BwvcfaArpbcgc7
https://photos.app.goo.gl/647SoDYkxZZEZqov6https://photos.app.goo.gl/647SoDYkxZZEZqov6
I'm happy, then the effort was worth it. thumbs up :thumbup::2pints:
Now I have to know how to install Cccam
FTP the .ipk to /tmp folder > Blue Button to launch EsiPanel > IPK Installer > Memory /tmp > Install Extensions > OK to select IPK > Green Button to start installation.
Restart GUI/Reboot.
Blue button - ESIPanel - SoftcamPanel > Select CCcam > Green button to Start.
I have to turn it on and off 4-5 times for it to work.
As has already been mentioned by emosim you may have a faulty power supply.
change your power supply and all will be good ;)
Don’t have an account yet? Register yourself now and be a part of our community!