What version of Oscam do I use on this receiver, as I have tried gx and it does not work, what config files should I use
Oscam on Octagon sx88 4k
- pendragon8985
- Thread is marked as Resolved.
-
-
This fix sx88 4k ;) 11695-798 perfekt on sx88 4k
Menü - oscam - blue Button Update oscam with USB - oscam gx.bin
Perfect ready and fast ! oscam-gx.zip
-
-
All Files 11695-798 Emu arm
Sx88 4k
Sx888 4k
Ustym 4K OTT
Hiremco 4K Turbo
-
Update 11696-798 Linuxsat
-
This 11696-798 Mohamed Other Linuxsat
-
You can also do it like this: get 1 oscam.gx in standard oscam and one in oscam.gx in oscam, then 2 can be changed;)
-
Oscam gx Newnigma2 1.88mb ;)
I have everything out what is going on at oscam So you can delete everything with usr / local / bin the 2x gx so the whole bin folder actually and with usr / local delete the oscam folder then you only use Oscam without smod without default so only in home / gx / local / oscam will also try the thcam to remove it picons I also removed everything just made my own picture on Default.png Kind regards https://gofile.io/d/tsC3ht
P.s.
Files in Home / gx / local / oscam
Oscam restart everything perfect
Now he automatically takes the fastest reader
P.s.
Rest everything stays the same as before with stat etc just config exchange make oscam restart and sender name there in webif;)
-
-
11697-798 Update
And
11697-798 Newnigma2 Compiler best 1.20mb ;)
And Mohamed 1.40mb
After you have downloaded the oscam from the online update, you can enter oscam webif from deviceip: 8888, enter the C lines in the CCcam.cfg files, save the oscam and restart. You don't have to convert to oscam.server to convert to oscam.cfg and what you put in oscam.server can work together.
If you want to add newcamd
To update the *** using FTP or download the keys updated by Softcam without the need for an online update, go to the Emulator Reader section in oscam.server.
device = softcam. *** is entered in the URL address, when oscam restarts, it takes the key from there
This is the best config
German OK !
Reader ohne Emulator Cardrock
[reader]
label=
protocol=cccam
device=
user=
password=
group=1
ccckeepalive=1
[reader]
label=
protocol=cccam
device=
user=dein
password=
group=1
ccckeepalive=1
[reader]
label=emulator
enable=0
protocol=emu
device=emulator
Und config mit stat Ordner Speicherung und Loadbalancer + Sender Name im Webif
[global]
logfile=stdout
lb_mode=1
disablecrccws=1
lb_save=150
lb_savepath=/home/gx/local/oscam/stat
[dvbapi]
enabled=1
read_sdt=2
[webif]
httpport=8888
httpallowed=127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,255.255.255.255
P.s. so kommt alles in provid und svrid2 alleine rein + eine Datei mit stat root 644 habe ich gemacht wegen Loadbalancer
Finale so !
-
Mohamed cccam Sky ready
Enter this if only cccam is to be used without oscam you can of course have both play together with the Mohamed gx
Cccam.cfg with C: start works perfectly just fill in the finished oscam restart that's it cccam is running server must stay there but empty it is only possible with ccc.cfg and yes everything;)
-
11698
-
Oscam gx 11700-798
-
-
3x Version To 11702 + gx 18.10 11702 - 1.40mb ;)
-
Auto Update softcam Mohamed for gx etc
-
Ncam Test sx 88 4k
-
The softcam.ncam or softcam.oscsm the script which is inside with root rights 755 of course and with usr local bin also then
oscam-smod at bin ncam is not surprising
Will refine it tomorrow
Just look like ZIP then you know about where did everything go where it belongs OK Usr 1 bin usr 1 local see folder exactly like this
Work perfekt ncam
Cool
oscam smod in bin folder is ncam ;) cool
it is in the menu oscam smod finished but that doesn't matter, everything goes
-
At the moment you still have to go to the menu oscam smod and restart oscam every time you change channels! will try to fix the whole thing! you can also take the normal oscam default instead of smod if you want to do it like that then the ncam in oscam-gx unnamed then it's oscam default and you still have the smod! but smod is too old anyway! I will try everything and let me know
-
So is oscam smod + oscam + ncam
Oscam default gone
And only those in Home gx local folder remain
And at
Usr local da oscam folder and oscam smod folder gone because they don't have access to the configdir
So oscam default is ncam now
Oscam smod is smod
Oscam is oscam 11702
OK
Ncam runs so perfectly the only problem after every channel change you have to go to menu Conditional Access oscam default - so restart ncam then works again
Try to fix today mfg
Files And Pictures
P.s. ncam is 100x better than oscam ! ECM very good ! More Readers with one Line cool all in one
Update : all works
With Telnet
/usr/local/bin/ncam -d /home/gx/local/ncam/config/ncam.conf
Update :
https://gofile.io/d/Q5uKds
Here all 4 but you always have to enter that afterwards sometimes but only when you switch over only little things! So that
/ usr / local / bin / ncam -d /home/gx/local/ncam/config/ncam.conf
Please wait for the fix or SoftwareUpdate :
This better all works i fix morning all Files or Software OK thanks all
Look Finish Files
Telnet
/usr/local/bin/ncam --config-dir /home/gx/local/ncam
Update : 12.4 ncam
OCTAGON SX88 H.265 HEVC HD Support Forum
OCTAGON SX88 H.265 HEVC HD includes support, firmware, software,tools,settings,channel lists, tutorials, and downloads.
Key features - H.265 / MPEG4 - HD / SD, DVB-S2 multistream tuner, Multistream Root, Gold, (PLP, PLS) T2MI support without parameter input, Hardware BlindScan (Blind Search) Low Symbol Rate Support (Low Symbol Rate Support), Stalker, Kodi (XBMC), Xtream IPTV, .m3u, YouTube, RedTube.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!