Hello Everyone
Need Oscam Or CCcam for Openatv 6.4 dm500hd v2
Hello Everyone
Need Oscam Or CCcam for Openatv 6.4 dm500hd v2
Sorry how to add oscam key ???
add oscam key
What is an oscam key?
Sorry dont know can you explaine pls
Sorry dont know can you explaine pls
Then describe/explain what you are trying instead.
Hello Everyone
Need Oscam Or CCcam for Openatv 6.4 dm500hd v2
why not download over OpenATV Feed?
Probably your trying to place oscam.server file in the box you can do that by connecting to box with any ftp connection program with openatv6.4 you have to specify password in the box first to get connected when you manage that you need to go to folder etc/tuxbox/config and place that file over there if you don't have file oscam.server just details you can edit that file in the config folder should show up after installing oscam11.676 ipk
hope that will help
Sorry pls tell where can find ( OscamWebif ) folder ???
Sorry pls tell location folder ???
Oscam>>>>etc/tuxbox/config
Sir you mean oscam.conf edit
#### "*******************************************"
#### "* ..:: A U T H O R ::.. *"
#### "* << MOHAMED_OS >> *"
#### "* ..:: http://www.tunisia-sat.com ::.. *"
#### "*******************************************"
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
preferlocalcards = 0
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
cccam_cfg_save = 1
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httpshowpicons = 0
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255
http_status_log = 1
where can find ( OscamWebif ) folder
Access the OscamWebif / oscam webinterface in a webbrowser.
Type the ip address of the box into a webbrowser then press enter > extras > oscam webinterface
Sorry pls tell where can find ( OscamWebif ) folder ???
This is not a directory.
In parentheses you have the URL Oscam Webif (abbreviation Web-If means: Web Interface or Web Configuration Interface).
Simply fill in the correct IP address of your device on which you have Oscam installed (IP address of the set-top box).
You can find the IP address somewhere in the set-top box - depending on the type of Enigma ... somewhere in the MENU, probably among the information or directly in the configuration of the computer network.
You can also find a list of connected network devices + their IP addresses in the WebGUI (Web - Graphical User Interface) of your WiFi router.
I am looking CCcam for openatv 6.4 dm500hd v2 oscam working not
Old box time for change :don-t_mention:
use OpenATV cam feed ! Use oscam ! Stable
Console type :
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
You find Simple_config_by_atari in file base or my signature use it
enjoy
I have CCcam install and i show you pic but cccam not showing on Softcam Setup need your help
Hi there !
In the case of Cccam softcam, these IPK / DEB installers are really crazy :). Just like the Cccam softcams themselves are crazy :). Each build / version of Cccam behaves differently. In addition, not every Enigma (Linux system) can handle properly starting a specific version / build of Cccam. I use my own launcher in conjunction with Cccam 2.3.0.
The startup script must be here: /etc/init.d/softcam.cccam
Then the appropriate executable file / binary must be here: /usr/bin/CCcam
(the most stable version, on my MIPS device, has proven Cccam version 2.3.0)
You also need to upload your configuration files for Cccam - they should be located here - for example: /etc/CCcam.cfg
(C: IP_OR_HOSTNAME PORT_NUMBER USER_NAME USER_PASSWORD)
Remember to also assign execution attributes:
chmod a+x /etc/init.d/softcam.cccam /usr/bin/CCcam
When you upload these files to the set top box (via FTP connection) and set the attributes (via the "chmod" command or also via the FTP manager, attributes with the value "755" for both files), you can enter the Softcams configuration in OpenATV and switch to Cccam + restart the uploaded Softcam.
If necessary, edit the "softcam.cccam" script yourself as you need it (arguments / switches for the CCcam binary).
Don’t have an account yet? Register yourself now and be a part of our community!