I NEED HELP ADMIN I NEED Digitalb Conax OScam Config FOR UBNTU ANY HELP FOR ME PLS
Digitalb Conax OScam Config
-
- General OSCam
- sat100
- Thread is marked as Resolved.
-
-
Here are the configs you need, How to : Oscam Server or Cardreader with CCcam2.1.3 DIGITALB, FTP the configs to /usr/local/etc.
You will need a conax cam to update entitlements once a month, as these configs dont`t update digitalb card.
-
Not working for me this config
-
If these configs are not working then the card will need activated in a conax cam or conax embedded slot on a receiver.
-
in the receiver its ok and in oscam i see 96.3% 127.0.0.1:34000 <> ? 7 00d 00:34:48 newcamd 1 1 386 43% b00 : 0 CANAL+ Scandinavia/DigiALB/Volia UA/Satro SK(DVB-C)/PlusTV FI(DVB-T)/COMHEM SWE(DVB-C)(1W/8W/4W/1W/5E/9E/13E/16E/19E/68E)
-
Check the card has entitlements first, How To See Your Card Entitlements When Using Oscam.
These oscam configs have been tried and tested, so they definately work buddy.
-
Ok MY logs Entitlements for digitalb
Cardsystem Valid To IRD ID (nagra) Provider
conax n/a FF FF FF FF 00 00 00 00 (sysid)
Serial Rom ATR
000054CE15120000 3B 24 00 30 42 30 30
Type Caid Provid ID Class Start Date Expire Date Name
package 0B00 000000 0000000000001010 010FFFFF 2011-06-27 2011-06-29 0B00:000000 unknown
package 0B00 000000 0000000000001010 010FFFFF 1990-01-01 1990-01-01 0B00:000000 unknown
PPV-Event 0B00 000000 0000000000000045 010FFFFF 2012-04-17 2013-04-17 0B00:000000 unknown -
i don't understand See my oscam its ok ecm ok 123 (77.36% what is my problem Admin
-
We might be able to help if you told us what your problem actually is. What aspect of your setup isn't working? You need to tell us what your problem is.
-
See my Oscam - 96.2% 127.0.0.1:34000 <> ? 7 00d 00:02:27 newcamd 1 34 41% b00 : 0 CANAL+ Scandinavia/DigiALB/Volia UA/Satro SK(DVB-C)/PlusTV FI(DVB-T)/COMHEM SWE(DVB-C)(1W/8W/4W/1W/5E/9E/13E/16E/19E/68E) Its ok . But not open channel this is my problem Black Black Black
-
You have a PC server running Ubuntu Oscam and Digitalalb card that is showing entitlements and when you go to a channel on your receiver, it is showing that the ecm reqest is ok, but you are getting a blank screen, I am guessing that the card is being read in a card reader attached to your PC (this is a guess because you haven't said it is the case), and you are using newcamd or newcamd protocol somewhere along the lines.
What I have worked out is detective work, because you are not being that clear. You get the best support in this forum, but only if you can be more clear about what is happening. So far we don't know how your server is connected to your PC, we have no idea of your existing Oscam config files, we don't know if you are Using CCcam, we don't know what receiver or image you have because you haven't put any information in your profile.
We like to help in this forum, but we need your help so we can have a better understanding of your problem.
-
Any Help For ME pls How to open the channel always black not open . ->type: Conax, caid: 0B00, serial: 1422791954, hex serial: 54ce1512, card: v64
Providers: 1
Provider: 1 Provider-Id: 000000
Provider: 1 SharedAddress: 002A670A
Package: 1, id: 1010, classes: 010FFFFF, date: 2011/06/27 - 2011/06/29, name: Preview
Package: 2, id: 1010, classes: 010FFFFF, date: 1990/01/01 - 1990/01/01, name: Preview
PPV-Event: 1, id: 0045, date: 2012/04/17 - 2013/04/17, name: Premium-HD -
PC server running Ubuntu Oscam 1.10 stable+ cccam 2.1.3. oscam.conf [global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1[webif]
httpport = 8888
httpuser = xxxx
httppwd = xxxx
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255[newcamd]
key = 0102030405060708091011121314
port = 34000@0b00:000000oscam.server
[reader]
Label = DIGITALB
Protocol = smartreader
Detect = cd
Device = 003:002
mhz = 375
cardmhz = 375
group = 1
CAID = 0b00
EMMCache = 1,3,2
PinCode = 0000
ident = 0b00:000000
ecmwhitelist = 0B00:4E,5D,6E,66,69,FFFFFFFFoscam.user
[account]
user = digi
pwd = alb
group = 1
au = DIGITALB -
And Very Thnxs for Help me Admin
-
TRY this one this for omnikey reader but you change for your need
oscam.conf
Code
Display More[global] nice = -1 WaitForCards = 1 ClientTimeout = 5 CacheDelay = 120 logfile = /usr/local/etc/oscam.log saveinithistory = 1 [newcamd] Key = 0102030405060708091011121314 Port = 34000@0b00:000000 keepalive = 1 [webif] httpport = 16002 httpuser = root httppwd = xxx httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
oscam.serverCode
Display More[reader] label = digitalb enable = 1 Protocol = pcsc detect = CD device = 0 group = 1 mhz = 500 cardmhz = 500 emmcache = 1,3,2 ident = 0b00:000000 caid = 0b00
oscam.user
in CCcam.cfg -
thanx 4 oscam config but 2012/05/27 18:34:28 B7367B70 r Error processing ecm for caid 0B00, srvid 038D (servicename: Explorer natyra) on reader digitalb.
-
is it your card from an HD receiver or a "normal" receiver (with out HD channels).???
-
try using drfox's configs but change part of the oscam.server back to how you had if before, as your card seemed to be regognised in oscam ok with that
put the above back in your oscam.server card entry, replacing the equivalent existing entries from drfox's configs.
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!