no connection with MCS

Hi,

I made a MultiCS and made a C-Line:

CCCAM VERSION: 2.3.2

CCCAM NODEID: 3297D2BD1070150C

CCCAM KEEPALIVE: YES

CCCAM PORT: 55000

CCCAM STEALTHMODE: YES

CCCAM DCW CHECK: YES

F: user pass

oscam.server:

[reader]

label = test

description = multics

protocol = cccam

device = test.sptest.de,55000

user = user

password = pass

inactivitytimeout = 30

disablecrccws_only_for = 0500:050F00;09C4:000000;098C:000000;098D:000000

group = 1

cccversion = 2.3.2

cccmaxhops = 3

cccwantemu = 1

ccckeepalive = 1

cccreshare = 1

audisabled = 1

[cccam] connect failed: Connection timed out

I still have an OScam server (Fritzbox) and entered the reader there. Connection works, just not via the receiver. I do not know what.

Have an N Line (Multiport) with Reshare

I entered the N line port for port in OScam, and now it works. I can't get it going with Multics. Stb at home and outside

attached the complete config.

Multics-r100rc36-PubBeta-BrokenArrow_x64

I also tested the version, same error -> MultiCS r82 HB V54

Oscam habe ich auf dem Stb

Oscam.server:

[reader]

label = youfeed-OScam

protocol = cccam

device = IP,6001

user = user

password = pass

inactivitytimeout = 30

disablecrccws_only_for = 0500:050F00;09C4:000000;098C:000000

group = 1

cccversion = 2.3.0

ccckeepalive = 1

corrected it.

I still get a timeout on the receiver.

If I enter the C-Line from the receiver in my OScam server, the connection works.

Just doesn't work on the receiver.

[16:19:31.005] -> ecm to CCcam server2 (xxx:10000) ch 09c4:000000:008b:d541bc57
[16:19:31.044] <= cw from CCcam server (xxx:10000) ch 09c4:000000:008b (39ms)
[16:19:31.677] |> decode failed to CCcam client '2056' ch 09c4:000000:008b (930ms)
[16:19:36.260] <|> decode failed to CCcam client '2056' ch 09c4:000000:008b:d541bc57

Thanks for your help, I have now managed to get the client to connect. But doesn't get light yet.

Got it. In Profailes.cfg I still had to adjust the 09C4. Should I leave Oscam on the STB and connect with CCcam or is there a better alternative?

[2020/12/30 18:35:01.752] INFO - <| decode failed from server (xxx:xxx) ch 09c4:000000:0088 (824ms)
[2020/12/30 18:35:01.958] INFO - |> decode failed to mgcamd client 'test1' ch 09c4:000000:0088 (1031ms)
[2020/12/30 18:35:07.453] INFO - <|> decode failed to mgcamd client 'test' ch 09c4:000000:0088, already failed

I keep getting this message. Sometimes every 4 minutes, sometimes every 10 minutes. How can I find out whether the problem is me or the server?

2020/12/30 12:30:26 066966A3 c (ecm) local (09C4@000000/01A0/0017/A7:Exxx0): not found (0 ms) by Reader-1 - Sky Krimi
2020/12/30 12:30:26 066966A3 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 2 disabled ecmpids!
2020/12/30 12:30:26 066966A3 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B40 ANY CHID PMTPID 0065 VPID 05FF

I tried the line directly in OScam with my receiver. And if I get this message, I assume the server has a problem.

I received an N line from the server.

N: xx.xx.xx 1500: 1585 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14