OpenPLI-7.3-Dreambox-ONE-UHD-Full Image BackUP-27-12-2020
The Image works perfectly
Also please post comments after use
Download
OpenPLI-7.3-Dreambox-ONE-UHD-Full Image BackUP-27-12-2020
The Image works perfectly
Also please post comments after use
Download
Hello
I have the original box, can I install this image
Hello
I have the original box, can I install this image
Yes, this is for the original box (there is no clone).
To be sure you have latest microcode in the Tuner, just install/flash latest NewNigma2, then flash this image, and all will work fine.
Emo
some notes
1-When the image is uploaded to the receiver, a message of the success of the operation is not displayed.
2-The bootlog image does not work.
3-The network adapter lan connection is shown frequently.
4-The network address cannot be seen in the menu
5-The receiver is on and the lamp is turned on and off.
6-Settings of Recovery Mode not available.
so you do not recommend installing now
Try it is excellent and would like updates for you to do something online
We fixed the Install Wizard that will be soon on the feeds, selection of HDMI resolution.
About network, you have various settings ones, wifi, blutooth, AP, and last one in the menu that is the RJ45 cable network connection. The IP is shown on the Information page.
Image will not work with multiboot, it needs to be flashed to main flash chip directly, probably why one person tells it is not working for him at all.
Bootlogo dreambox is appearing during start of boot.
For now as we are working on the fundamentals of the image, the recovery mode and DMM anti-clone security tpmd are not included.
Emo
do the fnc addons also work?
fnc addons ???
Emo
Sorry wrong thread, FNC-Addons are part of pure2 and not openpli
Hi
Very good work thanx
Please can we install supcam ?
Thank you very much
hi
t have tested this image on dream box one
1/ good work
2/ problem with the UHD channel sound but ni piture
3/ installed a cam supcam but impossible to bonnet to the net
thank you japhar
Hello,
I flashed this image on my Dreambox One. Now I want to use an OE 2.6 image for some testing.
But the dreamboxupdate.com image now does not boot. Is there any possibility
to use a OE 2.6 image on multiboot ?
Regards.
You cannot mix DMM and Open images in multiboot,
Emo
So I cannot flash a DMM image any more ?
So I cannot flash a DMM image any more ?
You can, just press the frontpanel button to set the box in flash mode, and then flash the image you want.
Emo
So I cannot flash a DMM image any more ?
You can, just press the frontpanel button to set the box in flash mode, and then flash the image you want.
Emo
I flashed 'dreambox-image-dreamone-20201210.tar.xz'. It only shows the dreambox logo - and no more.
I attach below the boot log from the serial connection (putty.log).
I also attach the boot info from telnet command 'journalctl -xe >> /tmp/output.log 2>&1 &' .
What is the error please - and can anything be done ?
Regards, pcd.
It looks like yor multiboot software is gone bad... it's NOT compatible with Open images, the author doesn't want these images to work on his multiboot software.
Better is If you want to flash a standard image, flash the one from the Webif online update, it will work better that way (and get rid of the multi-boot),
Emo
It looks like yor multiboot software is gone bad... it's NOT compatible with Open images, the author doesn't want these images to work on his multiboot software.
Better is If you want to flash a standard image, flash the one from the Webif online update, it will work better that way (and get rid of the multi-boot),
Emo
No multiboot. I flashed the DMM image with the rescue loader after pressing the front button as instructed by you. I also tried the online restore. After online restore I get no connection to DCC.
Zloženie: 100% bavlna. pleace openwebif dreambox one thx
It looks like yor multiboot software is gone bad... it's NOT compatible with Open images, the author doesn't want these images to work on his multiboot software.
Better is If you want to flash a standard image, flash the one from the Webif online update, it will work better that way (and get rid of the multi-boot),
Emo
I am not doing any multiboot.
If after flashing the openpli backup image (Post 1) - if it is not possible to flash a DMM image - please put in a warning in Post 1. I foolishly assumed that your Dreambox One openpli image was using OE 2.6.
Regards.
Download DreamOne Dreambox One 4K UHD Enigma2 Images. Team Support from OpenBh - OpenPLi Japhar - OpenATV - OpenVision - PurE2 - SatLodge
Don’t have an account yet? Register yourself now and be a part of our community!