i am facings problem in some tps off Airtel 108E like 12170 H 45000 there is no audio and video in this tp with dreambox box official unstable latest image with front processor version 1.12, above tp working ok with july 2020 image, could any body help me to upgrade front processor version with 1.9, or any other tip to resolve above issue with latest build.
Dreambox one uhd no audio and video
-
- Dreambox Gemini Project 4
- Hardware Support
- soomar
- Thread is marked as Resolved.
There are 11 replies in this Thread which was already clicked 1,318 times. The last Post () by storm_breaker.
-
-
Try to use the Open images (OpenPLi, OpenATV, OpenBH and PurE2), as audio is managed differently and could work out.
Emo
-
Try to use the Open images (OpenPLi, OpenATV, OpenBH and PurE2), as audio is managed differently and could work out.
Emo
thanks for reply there is problem in latest drivers with old drivers everything working fine in official image pli need to improve video output results.
-
Try to use the Open images (OpenPLi, OpenATV, OpenBH and PurE2), as audio is managed differently and could work out.
Emo
thanks for reply there is problem in latest drivers with old drivers everything working fine in official image pli need to improve video output results.
If you install the latest ones (eg 20210110), you will see that the Video is properly managed and you can use all definitions needed.
Emo
-
i am facings problem in some tps off Airtel 108E like 12170 H 45000 there is no audio and video in this tp with dreambox box official unstable latest image with front processor version 1.12, above tp working ok with july 2020 image, could any body help me to upgrade front processor version with 1.9, or any other tip to resolve above issue with latest build.
Repair Frontprocessor Firmware after flashing a Dreamone Firmware
-
i am facings problem in some tps off Airtel 108E like 12170 H 45000 there is no audio and video in this tp with dreambox box official unstable latest image with front processor version 1.12, above tp working ok with july 2020 image, could any body help me to upgrade front processor version with 1.9, or any other tip to resolve above issue with latest build.
Repair Frontprocessor Firmware after flashing a Dreamone Firmware
Can you please define how to repair front proccessor Version in dream one any script or command if you have share here currently i have 1.12 version in my receiver.
-
Just follow the link to DP board that i posted and you find it well descibed
Here is the direct link:
-
Just follow the link to DP board that i posted and you find it well descibed
Here is the direct link:
Thanks for reply in above link only dreambox two front proccessor method is written can you guide for dreambox one.
-
i am facings problem in some tps off Airtel 108E like 12170 H 45000 there is no audio and video in this tp with dreambox box official unstable latest image with front processor version 1.12, above tp working ok with july 2020 image, could any body help me to upgrade front processor version with 1.9, or any other tip to resolve above issue with latest build.
Repair Frontprocessor Firmware after flashing a Dreamone Firmware
Can you please define how to repair front proccessor Version in dream one any script or command if you have share here currently i have 1.12 version in my receiver.
The repair was released for the DreamTwo (that had flashed the DreamOne FP Microcode).
So there is no update version for the DreamOne, and if you already have the 1.12, it should be the last one.
Emo
-
Sorry did not read the thread header that it's about Dream One ;) emosim is correct.
-
i am facings problem in some tps off Airtel 108E like 12170 H 45000 there is no audio and video in this tp with dreambox box official unstable latest image with front processor version 1.12, above tp working ok with july 2020 image, could any body help me to upgrade front processor version with 1.9, or any other tip to resolve above issue with latest build.
Repair Frontprocessor Firmware after flashing a Dreamone Firmware
Can you please define how to repair front proccessor Version in dream one any script or command if you have share here currently i have 1.12 version in my receiver.
The repair was released for the DreamTwo (that had flashed the DreamOne FP Microcode).
So there is no update version for the DreamOne, and if you already have the 1.12, it should be the last one.
Emo
Thanks for reply brother this is gp4.1+cvs image for dreambox one uhd screenshot there is frontproccessor version 1.9.
-
SO you defenetly need to update the FP to 1.12 . There various option , which are aready mention above .You can also install the Newnigma2 image , will ask you to update the FP , then you have to reboot the box. Confirm that it shows FP1.12 and you are ready to go :)
Dreambox One 4K UHD 2160p H.265 Enigma2 Linux Android Dual Wifi DVB-S2X MIS Satellite Receiver.
Download DreamOne Dreambox One 4K UHD Android CoreELEC, DreamOS Firmware and Enigma2 Images. Team Support from DemoniSat - Dream-Elite - Gemini Project GP4 - Merlin Project - NewNigma2 - Peter Pan Neverland - OpenBh - OpenPLi Japhar - OpenATV - OpenVision - PurE2 - SatLodge.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!