this openpli homebuild image is not for beginners.
this openpli homebuild image is only for dm800se clone with sim 2.10.
to install it, you must have a pc with a bash shell (for example linux ubuntu) on the same network of your dm800se, and know how to use the bash command line.
the image built by compiling the latest openpli 8 develop sources is bigger than the flash available in the dm800se.
to install it, you must have a hard disk installed in the dm800se with at least 100Mb of free space, mounted in /media/hdd (as usually happens by installing OE 2.0 images).
therefore, BEFORE being able to transmit the image file to the dm800se, you must prepare the box to succesfully boot with that new image, making available all those files that do not enter into the flash.
summarizing:
- you have a PC with a bash shell (for example linux ubuntu), and you are able to go to the bash command prompt and reach your dm800se via the network
- you know the IP address of dm800se, and root password (the root password CANNOT BE EMPTY!)
- you have a dm800se clone sim2 2.10 with another image installed that allows you to reach it via network from your PC
- you have a hd in the dm800se with at least 100Mb of free space mounted in /media/hdd
in the example, let's assume that dm800se has the IP address 192.168.1.135 and that you are in a bash command line of your Linux PC, in an appropriate directory:
user@ubuntu# ping -c 2 192.168.1.135
PING 192.168.1.135 (192.168.1.135) 56 (84) bytes of data.
64 bytes from 192.168.1.135 (192.168.1.135): icmp_seq = 1 ttl = 64 time = 0.208 ms
64 bytes from 192.168.1.135 (192.168.1.135): icmp_seq = 2 ttl = 64 time = 0.159 ms
--- 192.168.1.135 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 3077ms rtt min/avg/max/mdev = 0.159/0.212/0.243/0.034 ms
user@ubuntu# telnet 192.168.1.135 Trying 192.168.1.135 ...
login: root password: **********
root@dm800se# df
File system 1K-blocks Used Available Use% mount point
.....
/dev/sda1 148860244 67353076 73922452 48% /media/hdd
..... root@dm800se# exit
Display More
if these conditions are true, download the image:
user@ubuntu# wget http://usuba.net/openpli/8/images/dm800seclone/openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip
--2021-02-05 07: 07: 52-- http://usuba.net/openpli/8/images/dm800seclone/openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip
Resolution of usuba.net (usuba.net) ... 195.110.124.188
Connection to usuba.net (usuba.net) | 195.110.124.188 |: 80 ... connected.
HTTP request sent, awaiting response ... 200 OK
Length: 74556663 (71M) [application/zip]
Saving in: "openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip"
openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl 100% [====================================================>] 71.10M 3.19MB / s in 22s
2021-02-05 07:08:14 (3,22 MB / s) - "openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip" saved [74556663/74556663]
user@ubuntu#
Display More
unzip the downloaded image compressed file
user@ubuntu# unzip openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip
Archive: openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip
inflating: openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh
inflating: !!!! README !!!!
user@ubuntu#
launch the installation shell with three parameters: <boxIPaddress> <user> <password>
user@ubuntu# ./openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh 192.168.1.135 root rootpassword
recoding data (be patient) ... done.
verifying local ... image 'openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi' found.
verifying remote '192.168.1.135' ... on line.
verifying remote path '/media/hdd' ... found with 96523592k of space.
preparing remote '192.168.1.135' (be patient) ... done.
activating remote '192.168.1.135' (be patient) ... done.
--------------- YOU NOW CAN FLASH 'openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi' TO '192.168.1.135'.
have a nice day.
---------------
user@ubuntu#
Display More
your dm800se has now all the files on the hard disk, necessary for the new image to succesfully boot and work.
you can then load the .nfi file (located on the PC in the same folder from which you launched the shell to prepare the box) with the traditional method via browser.
user@ubuntu# ls -la
total 2532
drwxrwxr-x 4 user user 4096 feb 5 07:22 .
drwxrwxr-x 3 user user 4096 feb 1 08:31 ..
-rw-rw-r-- 1 user user 53299024 feb 4 18:35 openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi
-rw-rw-r-- 1 user user 1828 feb 4 18:35 '!!!!README!!!!'
user@ubuntu#
enjoy....