DM900UHD : OpenPLi 8.0Star 20210218 4k 1.18.3 (Original)

DM900UHD : OpenPLi 8.0Star 20210218 4k 1.18.3 (Original)

openpli-enigma2-8.0star-dm900_Original_GStreamer_1.18.3_20210218.rootfs.tar.bz2

- OpenPLi 8.0Star by Japhar Team, February 18th 2021

- Python 2.7.18

- GStreamer 1.18.3

- EPGImport Built-in

- 4k-UHD/HEVC-H265/AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

- JAM 5.3 built-in (Plugins/Addons)

- Original Sim/Chip Required

- Support by Japhar Team

MEGA Original DM900UHD :

https://mega.nz/file/qKZRxARZ#nmL0wegyG0bFXnsoAa5HbvTfrVxznrrhYmVjUvHhRas

You will need to install them from the feeds, once we will upload the feeds. This will happen when we will have released all the OpenPLi 8.0star images. Currently working on the next boxes.

Emo

Japhar images doesnt work in multiboot/BA,

You need to install in flash,

Emo

Quote from danfat

hi

I have a dm900 original and I have tried this image and my box but only flash the front light and doesn't show anything else

do you know what is happening?

many thanks

danfat

It works no problem here, tested on original box. Reflash.

The flash log is NOT important, as it is formatted to check DMM image format. It works fine, before posting we naturally tested it for few hours, and it just worked perfectly.

Emo

You flash image clean and naturally dont import the settings on the clean new install ?

Flash the online recovery image via the web interface, then flash again our openpli.

Emo

Installed and perfectly working... so check what you do then.

Emo

This image can work only in Flash, NO BA or Multiboot... and flash the tar.bz2 file that is inside the rar archive file, not the archive rar file naturally.

Emo

If it doesn't work, it does on mine, just do this command (putty ssh/telnet to the box), so send command below, then reboot the box,

rm -r /lib/modules/3.14-1.17-dm900/kernel/fs/nfsd

Emo

Thank you for the positive feedback,

Emo

Quote from jhon32

Quote from emosim

is work now ,thank you