Pure2 6.5 for Vu+ DUO 4K SE

could you please post here the pure e2 image vu+ duo 4k se please

there is no pure2 image for duo 4k se in pure2 homepage. Why does not pure2 team support duo 4k se ?

At the Moment there is no Image for Duo 4k se . At the moment VU is a not supportet Manufacture . We get nothing from VU no driver no codes no samples . For the Moment we have to much other Prios to do . We start a new Image Version 6,6 experimental and set 6,5 to stable .

No time to do blindmode test for Manufactures that do not help us sorry

http://www.pur-e2.club/OU/imag…urE2-6.5-20210420_usb.zip

Please try and report !!

Hi, @jack1.9, installed and tried Pur-E2 on my VU+ Duo 4l SE a little today.

skin is very nice and easily readable

thanks

learning slowly so far so good

I am learning now:

how to configure the audio (at the moment on Pur-E2 audio is available via home cinema via optical; cable)

struggling now with Channels Menu/favorites: need to get used to new UX for me

how to configure the bouquets (your settings and downloadable does not fit mine satellites) - mine are:

30°W (27.5°W), 4°W+0.8°W+4.8°E+(9°E)+13°E+19.2°E, 16°E+23.5°E+28.2°E, 45°E+36°E+31.5°E, 39°E, (56°E), 75°E+(80°E)+85.2°E+90°E

DiseqC 16/1 EMP-Centauri,

/before was using BH 3.1.0.G for a week. I recently migrated to Vu+ from Openbox

2-months experience with enigma2 on clone DM800HD

before that 10+ years I was using Openbox Primscube Ruby, ( also from Marusys like Vu+) (no enigma2, but GUI similar with integrated KODI)

and 10+ years Openbox® CI-7200PVR

/

Hello delari You can change the settings as needed. Under Settings on the feed are also various rotor settings . Also there are Multifeed settings but i think not for sooo much satelites you use . Diseque 16 is a very big number 1 myself only use Diseque 8 and use only 6 Satelites

Hi, @jack1.9,

thank you

yes, I discovered that in the sat settings I need not only assign the LNB like LNB1... LNB16, also the 'input" input1... input16

I really use all 16 LNBs, connected not tried to connect more, DiseqC 16/1 EMP-Centauri allows that.

so far Pur-E2 crashed a couple of times with the blue screen with a very fast automatic reboot

one crash was when I was staying some technical sat channel, and clicked 'channel info" after that there was a crash.

If you have some test routines checklist you would like me to check/test - I would be happy to help you with my VU duo 4k SE

At the Moment we are in contact to VU . Maybe we can change the situation that we have to build Image for the Boxes in Blind Mode . If there come some more from the manufactures to help us with drivers and sources maybe we need some more infos for this boxes . Feel free to give us report what is ok and what is not good . However, we can not fix all the bugs at the moment because we lack the support . We hope that it will change.

For directly Infos to the Developers it is better to use our Home Forum but we also help here ! It just takes a little longer:2pints:

Oh okay,

yes correct

Hi jack1.9,

I am struggling now to get audio via TV, (HDMI)

On Pure2 6.5 now goes from STB via optical cable via home cinema only.

Any hint on how to get Audio via HDMI on TV?

At the moment your website is off .We cant downloads