wait...isnt h7c multiboot?
Zgemma H7C brand new stuck on BOOT
- ibbnog
- Closed
- Thread is marked as Resolved.
-
Devi decomprimere il file zip e inserire solo la cartella zgemma e tutto ciò che contiene e poi collegarlo alla posta usb 2.0 ... apri lo sportello anteriore e tieni premuto il pulsante e contemporaneamente accendi il pulsante del decoder dietro. .. lasciare il pulsante flap quando appare il flash.
---------------------------------------------------
You have to unzip the zip file and insert only the zgemma folder and everything in it and then connect it to the usb 2.0 mail ... open the front door and hold down the button and at the same time turn on the button Of the decoder behind. .. release the flap button when the flash appears.
-
Scollega tutto, antenne, cavo hdmi, rete, e lascia solo alimentazione e riprova con pennetta usb e se va a buon fine spegni e collega HDMI e vedi se parte.
Prova ad usare una immagine più vecchio di quella che ti ho messo prima
--------------------------
Disconnect everything, antennas, hdmi cable, network, and leave only power and try again with a usb stick and if it is successful turn off and connect HDMI and see if it starts.
Try using an older image than the one I put you earlier -
what usb stick are you using ?
-
wait...isnt h7c multiboot?
ok so i did everything you told me to do in the exact order. it got to FLSH, it flashed , it displayed BOOT, i stopped the box, i put the hdmi in, i turned on the box , still stuck on BOOT(openATV 6.2)
when other member said use older image he did not mean openatv 6.2 use 6.4 or 6.3
-
ADATA 8GB which worked to flash but after that still got stuck on boot
I would prefer you to flash pure2 or openvix.....
The box ships with openatv, so if you can flash either of those you will know it has indeed flashed.
Do not add anything like force or no to the files.
-
192.168.0.57
on your browser
see if you get openwebif
6.2 should have default password
root
dreambox
6.3 and 6,4
you have to make new password from image menu
from my memory ( they could have updated to all images )
-
if not open in browser
image hasn't installed
it's the ip of Zgemma 7C
if you installed another new image you may get new ip
if you had could have openwebif
you would have access to menu and settiing's of box
-
http://images.mynonpublic.com/…0/index.php?open=zgemmah7 openatv 6.0
http://images.mynonpublic.com/…1/index.php?open=zgemmah7 openatv 6.1
you been given the other 6.2 > 6.4
one of these must work
id try them all from 6.0 to 6.4
-
question
is your called Zgemma 7C
a 7C
or
7AC
from openpli download page
i wouldn't know if it makes any difference
never heard of 7AC
-
Will those 6.0 and 6.1 images even work will they have support for his box
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
