Posts by urie

Quote from NMarcelo

Quote from urie

Quote from NMarcelo

Quote from urie

NMarcelo , the time shown on left is amount of time movie has played and on right is the lenght of the movie.

both images from versions you have posted are the same ie the lenght of movie is the same but the time you have played movie for is different

so actual time in xstreamity is correct but you are talking about display screen

Hi urie, I always talked about showing the "Time remaining" in the box, I don't know what you saw or realized, but here is the direct explanation.

compliments

Remaining time: 1H 32m

1.jpg

Remaining time: 57m 39s

2.jpg

Display More

yes display on box that is what i said for me it is lcd display

Display More

I'm talking about a box with a normal number display and not a box with an LCD display.

urie You already answered here yourself, greetings

Quote from urie

Quote from pontiak

It works for me with the latest version with Xstreamity. The remaining time and the elapsed time are displayed. Also on the display of the box.

BOX: VUDUO4K

Image: VTI

completely different you have lcd display and are also using lcd display plugins or skins that are not in xstreamity.

Display More

I said in last post

yes display on box that is what i said for me it is lcd display

Quote from NMarcelo

Quote from urie

NMarcelo , the time shown on left is amount of time movie has played and on right is the lenght of the movie.

both images from versions you have posted are the same ie the lenght of movie is the same but the time you have played movie for is different

so actual time in xstreamity is correct but you are talking about display screen

Hi urie, I always talked about showing the "Time remaining" in the box, I don't know what you saw or realized, but here is the direct explanation.

compliments

Remaining time: 1H 32m

1.jpg

Remaining time: 57m 39s

2.jpg

Display More

yes display on box that is what i said for me it is lcd display

Quote from ermanyalcin

after checking first message again, i loaded the dependencies. my problem is solved.

yes good to hear you got it working , this is normal no one reads first page where all information is.

in that case go back to openatv forum and see other answer .

Quote

It works on atv

After configure fallbacktuner you need only

to add channel settings to watch TV

Quote from BadBlake

Thanks, I'l have to try that forum, but I thought maybe someone here knew something about it, but I guess I was wrong. By the way, Fallback and Remote stream converter are very different. Stream converter does not have all the options that Fallback has, nor does Partnerbox.

I don't know if anything similar for VU but on gigablues there is a pluging called GBIpboxClient

Quote from BadBlake

#12

Thanks but I already know all about this. I've used the Fallback option for many years when using OpenPLi. OpenPLI and I also see that OpenBH has a setup page for the fallback option -which I can't find in OpenATV 7.4. That's the problem. I only found where to enter ip of remote receiver, which I entered. There is nothing more that I can find to get it working.

In other words, it has a option to activate the fallback remote receiver (yes or no) and option for entering ip address, and that's it. No more setup options, no button to press for activation to download  channels from remote receiver.

If you are that determined to use falback why don't you ask on openatv forum , but even on there from what I can see most use remote channel stream converter

Quote from BadBlake

• #8
  

No I did not install parnerbox. I want to use the fallback remote receiver option.

Like I said in #4, -everything is set up but how to get it working? I don't see an option in OpenATV which engages the fallback remote receiver.

In OpenPLI after setting up remote receiver ip you get an option for (button to press) downloading channels and epg from remote receiver. I don't see anything like that in OpenATV 7.4.

did you also do as advised in RE: Activate and setup Fallback Remote Tuner on Vu+ Duo2 - OpenATV 7.4

and if you look at the openpli you will see remote channel stream converter is installed and tuners disabled

NMarcelo , the time shown on left is amount of time movie has played and on right is the lenght of the movie.

both images from versions you have posted are the same ie the lenght of movie is the same but the time you have played movie for is different

so actual time in xstreamity is correct but you are talking about display screen

Quote from jocke90s

Okey. But it was never problem before, Im positive I dont give wrong details. Okey thanks

copy you playlist into
*NEW* IPTV Stream Checker V.3.05 Deluxe Edition by KiddaC
then see result

miah , i use surfshark via wireguard plugin and virmin media , but you may be ok it could be uk or isp restrictions.

Quote from DiddlyDude

Hi all, I have just done a complete new, fresh install of OpenATV 7.4 on to my Gigablue UHD QUAD 4K Enigma2 Receiver, everything is working fine, except I am getting error messages to do with Top Picks V7.5 2024 as shown in the attachments.

I have re-installed OpenATV numerous times over the months/years, but I never encountered this error message before. Can anyone shed any light on how I could fix this, “without” having to go through the re-install path again !

I have done all the usual stuff ie. changed the skyscraper.sh and skypicker.sh permissions to 755.

Help urgently needed HI HI !!!

Display More

I have same problem i only use uk vpn addresses london and glasgow does not work but edinburgh and manchester does work for me.

Quote from BadBlake

I would like to activate and set up Fallback Remote Receiver on my local tuner Vu+ Duo2/OpenATV 7.4

Remote tuner: Vu+ Uno 4kSE/OpenATV 7.4

I have used this feature before when I had OpenPLI and it works a lot better than Remote channel Stream Converter imo.

Can somebody help me set this up on OpenATV 7.4?

going by this and it is openpli Streaming with fallback remote tuner
you just add ip address in customize system settings. and enable it.

also found this on another forum:

Quote

Right, I've done some testing with this now.

Scenario 1: Zgemma box 1 initially connected to 2 x Satellite cables and setup as a standard box with all bouquets and channels etc. Then Satellite cables removed, tuners disabled. Within the Menu > Setup > Usage & Gui > Customise menu, I've 'enabled fallback remote receiver' and set the 'Fallback remote receiver url' as http://x.x.x.x:8001 (where x.x.x.x is the IP address of Zgemma box 2 which is all setup and connected). With this all setup I can browse the channels originally setup on Zgemma box 1 as if they were native on my box. I can timeshift and record. You will notice two things in the info bar. There is no tuner shown (usually this would be a or b) and the SNR% is blank. This confirms that you are streaming (other than the obvious absence of satellite cables at the back)

there is also a plugin called partnerbox

Quote from jannipa

whats the name of your skin font? slyk1080-r19

look at skin.xml in /usr/share/enigma2/slyk-1080-r19/ folder

Quote from Birdybird

https://www.linuxsat-support.c…asted-from-clipboard-png/

This option i dont have in openatv7.3

Catch up ......

With jediepgplugin i can select the epg via

Epg importer the epg for me is not visible from my list

i also run openatv 7.3 and i do have that option and catchup does work

Quote from pontiak

It works for me with the latest version with Xstreamity. The remaining time and the elapsed time are displayed. Also on the display of the box.

BOX: VUDUO4K

Image: VTI

completely different you have lcd display and are also using lcd display plugins or skins that are not in xstreamity.

Quote from Birdybird

Where can i find epg importer plugin ?

in plugins extensions

Quote from BadBlake

Open ATV 7.3 / Vu+ Uno 4k SE here. How do I get rid of this message that keeps popping up when I enter plugins menu? I don't know where the extensions folder is either.

only you will know what extension you have uninstalled there are remnants left that need deleated. probably quicker to backup settings and do flashonline with restore settings any plugins you have installed that are not in feeds copy them to ipk folder on you mounted usb or hard drive images folder and they will be installed after online flash.

Quote from thriller

Hi, with Bouquet Maker Xtream I can't view the epgs, while with Jedi Maker I can, how can I solve it?

You need to post more information what image do you use have you selected your provider in epgimporter

Don't even know why it is even there in settings tried enabling it once when it first appeard useless once enabled no streams played.

I have various providers the ones I have added via iptveditor and some of the same ones not done via editor display only ALL

Capture.PNG

two others not done in editor displays catchup channels and they work.

another displays catch up channels and that crashes when i try to go into some categories and also when i try to play a channel.

Also latest version of 4.40 seems really slow i have busy pointer even when starting xtreamity and same when within plugin when i do anything, version 4.39 very rarely busy pointer a lot faster loads straight away.

out of interest I reverted back to older openatv7.3 backup image from 03/07 running xtreamity 4.39 and all providers catchup except one is working it just shows blank screen when playing.

P.S. I also tried removing and reinstalling service app to see if that would help with gstreamer erors in crashlog.