Hi everyone,
I have just installed openatv v 7.4 on my VU+ Duo.
Everything is working fine except FTP. Can anyone help me get this working again please?
Many thanks,
Jules.
have you set password in network settings .
Hi everyone,
I have just installed openatv v 7.4 on my VU+ Duo.
Everything is working fine except FTP. Can anyone help me get this working again please?
Many thanks,
Jules.
have you set password in network settings .
Display MoreOk that solves epg mod. I tried to install movie mod and disabled EMC but when I go to recordings I dont get the option to select sky planner etc i get nothing, Also when I press OK and then right arrow I get next channel. I used to get epg with 3 lines.
My memory is going and don't dabble much so may be left behind. I just saw open 7.4 is on the wat wtf! And that epg mod was nice.
I am sure there used to be a facility when doing an instant recording you could press red and get the option to stop reording!!
Am I better off with vix?
As kiddac knows i still dabble here are files i add, working on openatv7.3 and 7.4
On openatv 7.3. Can’t scroll across away from the favourites. Was fine yesterday
This evening can’t seem to see any bouquets. In the menu can see source and everything populates. Once bouquets are created I can’t see any just a favourites bouquet which is empty. Is anyone having a similar issue?
scroll to other bouquets faviourites will be empty if you have not added any .but not even knowing what image you are using will not help different skins me have different buttons to move between bouquets. and did you try rebooting gui.
no problem here on openatv 7.4 or 7.3 and aslo did software update even changed skin from kiddacs slyk1080r19 to metrix hd and still no problems.
How can I delete everything completely, then I do a new installation, then the pictures on VOD 4K will definitely work again, thx
just uninstall from plugins and reboot gui before that you can also select reset json file in XStreamity main menu, and also check once you have done that Root/usr/lib\enigma2/python/Plugins/Extensions if there is still XStreamity folder delete it and reboot gui again befor installing.
This evening can’t seem to see any bouquets. In the menu can see source and everything populates. Once bouquets are created I can’t see any just a favourites bouquet which is empty. Is anyone having a similar issue?
scroll to other bouquets faviourites will be empty if you have not added any .but not even knowing what image you are using will not help different skins may have different buttons to move between bouquets. and did you try rebooting gui.
version 4.45 have you actually setup recording path in main settings for device on openatv example: I am almost certain if there was problem more VIX users would be reporting.
In fact, on Openatv 7.3 there is no problem Vpn Manager works perfectly, the problem and on Openpli 9 which doesn't work even if you make the same configurations as on Openatv 7.3 I can't understand. Having said that, I hope someone will help me configure it on Openpli 9 too
contact openpli
Display MoreIl problema che ho fatto tutto messo credenziali surshark ma niente come vado a collegarmi alla vpn sembra che si collega ma in verita si sgancia proprio da internet e sono costretto a togliere corrente al decoder e rimetterla per ricollegarmi a internet ecco perche mi serve una guida passo passo della configurazione
Vpn Manager
The problem is that I put all the surshark credentials but nothing, how do I go to connect to the VPN, it seems to connect but in reality it disconnects from the internet and I'm forced to turn off the power to the decoder and put it back on to reconnect to the internet, that's why I need a step by step guide VPN Manager configuration step
once more please post in english I did mention try changing dns nameservers to google for example : from openatv as for step by step sorry dont know how many times instructions have been posted , and there is also dedicated PureVPN-Manager and SurfSharkVPN-Manager available in plugins but not being an Openpli 9 user i do not know if availableon that.
When I create the channels on one of my iptv sources everything seem ok ,I invert the bouquets then select the ones I want and all the channels associated with the bouquet are listed. After creating the channels every one has n/a by it. It works fine on jedi .How do I correct it.
do you still have jedimaker installed if so uninstall but make sure you delete bouquets via jedimaker before you uninstall it.
Infatti username e password Surfshark sono diverse da Purevpn e le ho messe correttamente nel plugin ma purtroppo non funziona sia con Purevpn e sia con Surfshark non so piu che fare sperando che qualcuno mi aiuti e che abbia installato lui Vpn Manager su Openpli 9 su decoder Zgemma h5. Vi ringrazio in anticipo.
As I said with surfshark you need to use credentials from manual setup
that dreamplex skin is that old I don't even have the files on my own computer any more. I thought dreamplex wasn't a thing anymore.
I also still have those files from your dropbox from a few years back
Legacy Skins (Older Builds Pre 2018)
Dreamplex - Slyk Onyx Skin
Dreamplex - Slyk Q Skin
Salve ho installato openpli 9 sul mio zgemma h5 e poi ho installato questo plugin per la Vpn enigma2-plugin-extensions-vpnmanager_1.1.7-py3_all ma non riesco a configurarlo ho messo i file di configurazione PureVpn ma non si connette neanche poi ho provato anche con file Surfshark qui invece i mappamondi diventano Verde ma purtroppo si sgancia da internet e di conseguenza sono costretto a togliere corrente e rimetterla altrimenti non va piu in internet detto questo qualcuno puo darmi una guida dettagliata per configurare questo plugin o con PureVpn o con Surfshark. Vi ringrazio in anticipo.
Hi I installed openpli 9 on my zgemma h5 and then I installed this plugin for the VPN enigma2-plugin-extensions-vpnmanager_1.1.7-py3_all but I can't configure it I put the PureVpn configuration files but it doesn't even connect then I also tried with Surfshark file here instead the globes become Green but unfortunately it disconnects from the internet and consequently I am forced to remove the power and put it back on otherwise it will no longer go to the internet having said this can someone give me a detailed guide to configure this plugin either with PureVpn or with Surfshark. Thank you in advance.
not sure about purevpn but with surfshark you do noy use normal username and password that you would use on other applications.
you need to log into your surfshark account via web browser and select manual vpn setup and different login details are given. Also sometimes you need to setup say google dns servers in network nameservers.
Display MoreSlyK 1080 R19 using OpenVix 6.5.001
Can I make Infobar EPG (using < >) look like when using Infobar (OK button)?
Edit:
(I see an option to change Infobar from 3 lines to 1 line, but this makes it look really big. I just want it appear exactly like Infobar when OK is pressed)
look here it may help *UPDATED* Slyk 1080 R19 (Install - FAQs)
I'm not talking about multiboot, but whether the 7.3 system will be automatically replaced with the 7.4 system or will I have to upload a new 7.4 because there will be no current updates on 7.3?
it never updates from one version to another you need to do that yourself and even when 7.4 is released does not mean that there will not be any updates for 7.3 it depends on when openatv decides it is (EOL) end of life.
As for multiboot I only metioned that because you could try openatv 7.4 on another slot.
Whether and when OpenATV 7.3 will be replaced with OpenATV 7.4, or do I have to reinstall the system to have OpenATV 7.4?
not much information what stb can you multiboot , any way you can save settings and flashonline to openatv 7.4 with restore settings
Display Moreroot@dm920:~# opkg install python3-requests
Unknown package 'python3-requests'.
* opkg_solver_install: Cannot install package python3-requests.
root@dm920:~# opkg install python3-urllib3
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python3-urllib3'.
root@dm920:~# opkg install python3-rarfile
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python3-rarfile'.
read this on openpli forums this was for version 9
easiest is to telnet into the box, and then on the commandline:
also,
you could install the software management plugin, start it, go to advanced, package management, scroll down to "python-requests", and press OK to install it.
ddinc openpli is it same version on both boxes and did you try installing the three missing dependencies
i.e.
opkg install python3-requests
opkg install python3-urllib3
opkg install python3-rarfile
Display MoreDisplay MoreIt's OK on Dreambox 820 but on 920 it produces only errors and had to uninstall
not sure if this will help or not i did repack of the ipk added files from latests tar file and changed dependencies from:
Depends: perl-module-io-zlib, python3-codecs, python3-compression, python3-core, python3-difflib, python3-json, python3-requests, python3-xmlrpc, unrar
to
Depends: python3-requests, python3-urllib3, python3-codecs, python3-compression, python3-difflib, python3-rarfile, python3-xmlrpc, python3-html, unrar
so not sure if this repack will make any difference,
because ipk on git is for cortexa15hf-neon-vfpv4
Edit: reuploaded ipk noticed there were .pyc files that were in original tar file i have now removed them.
Upgrading enigma2-plugin-extensions-subssupport from 1.5.8-r0 to 1.7.0 on root.
* calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-subssupport:
* python3-requests * python3-urllib3 * python3-rarfile *
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-subssupport
what build are you running im using openatv7.3 and openatv7.4
Yes well done but I Don't get it , why pay for new model that takes internal M.2 PCIe NVMe SSD and then put it in external device,
do older models not have usb 3 ports
lets face it if needed it would only take a few minutes to restore image from backup to another slot
It's OK on Dreambox 820 but on 920 it produces only errors and had to uninstall
not sure if this will help or not i did repack of the ipk added files from latests tar file and changed dependencies from:
Depends: perl-module-io-zlib, python3-codecs, python3-compression, python3-core, python3-difflib, python3-json, python3-requests, python3-xmlrpc, unrar
to
Depends: python3-requests, python3-urllib3, python3-codecs, python3-compression, python3-difflib, python3-rarfile, python3-xmlrpc, python3-html, unrar
so not sure if this repack will make any difference,
because ipk on git is for cortexa15hf-neon-vfpv4
Edit: reuploaded ipk noticed there were .pyc files that were in original tar file i have now removed them.