you should have carried on with film to show what happens when box reboots.
Zgemma H7C brand new stuck on BOOT
- ibbnog
- Closed
- Thread is marked as Resolved.
-
-
nothing :)) nothing happens its just stuck on boot again and again
-
Send it back to where you bought it, I hope there is a guarantee for you.
In my opinion it is not a question of the flash drive ..... in the meantime I see that you still have everything connected to the decoder including the cam ... when you do such tests you remove everything including HDD
-
Send it back to where you bought it, I hope there is a guarantee for you.
In my opinion it is not a question of the flash drive ..... in the meantime I see that you still have everything connected to the decoder including the cam ... when you do such tests you remove everything including HDD
i flashed without them . and the results were the same
-
anddd i cant send the fcking receiver back first of all, i thought it needed an hdd or ssd to boot, i put one and so it got rid of my warranty and second, the delivery is too expensive, from romania to germany
-
Put it up for sale ... :rasta2bigsmoke0gf1::rasta2bigsmoke0gf1::rasta2bigsmoke0gf1:
-
haha for nothing cause it s unusable
-
or i can say that it....works....hehehehehehehehheh
-
no i cant be that bad
-
I was joking;) but maybe you find someone who buys it by highlighting that it remains on the boot
-
and what the price you suggesting
-
does someone please have the bootloader of the h7 and can give it to me?
thank you
its my last chance to try :))
-
Yes it's been mentioned on various other forums that this issue could only be recreated on other receivers was by using an incompatible usb stick ..you might find the bootloader on the zgemma forums but I think you need to use a JTAG to flash it..somebody else will no doubt be able to confirm any of this...regards
-
with jtag or not i just want the bootloader first :)
-
Have you tried to flash with OpenVix ... and in my opinion and the usb is not compatible
-
so i tried a new usb stick for kingston which should work.i put every image of openvix and it flashed.BUT it still got stuck on boot on every image and i got no openwebif
-
Do a low-level formatting in fat32 and put the image you previously had that crashed on the decoder
Give it a try !!!
-
thats how i did all the images
low format
windows full format
then put the image
-
I'll list the files and folders as you need to use them to flash -
Folder = zgemma, h7
File = disk, imageversion
The bootloader does not exist single file but is contained inside the file disk
-
I have the bootloader for this box, but i have never used it or ever needed to TBH, in ibbnog case it is probably worth a try.
Flashing a bootloader may result in a brick, this is a warning to all that follow
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!