How to connect two card conax in one vps

Remotely not, sorry. Send me pm.

Private message, just create conversation with me, via my profile for example.

You have pm from me.

Quote from zilizila

Here is my simple How to:

Compiling oscam on Ubuntu is relatively easy. I use 18.04.1 LTS, but it also works on older and newer versions.

You must connect to a computer or server using telnet / ssh (use a small application called a putty). Select all lines at once and copy them to telnet (right-click on the cursor in telnet). The OS will start installing packages.

Code

apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g ++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip

Install this package only if you have Smargo cardreader (there may be a newer version on the sourceforge server, please check first):

Code

wget http://sourceforge.net/projects/libusb/files/libusb-1.0/libusb-1.0.8/libusb-1.0.8.tar.bz2
tar xjf libusb-1.0.8.tar.bz2
cd libusb-1.0.8
./configure; make; make install

We are now ready for the next steps!

Code

cd .. (you must go to the root directory of your system)
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn # you can also add: "-r xxxx" to the end to download a specific version of oscam. Very useful, especially if the newer version of OScam is not stable.
cd oscam-svn
mkdir build
cd build
cmake ..
make
make install # (this command will install oscam in the /usr/local/bin directory !! - if you already have an oscam binary there, make a backup of it)

Now you need to change the attributes of the oscam file to 0755. Use these commands:

Code

cd /usr/local/bin
chmod 755 oscam

You also need to set it to start automatically at boot time. Enter the following commands:

Code

nano /etc/rc.local

Write this line before the line "exit 0":

Code

/usr/local/bin/oscam -b

Press CTRL + C and confirm the changes with Y.

Now you need to create the oscam configuration files and transfer them to / usr / local / etc. You will also be able to use PSCS card readers (such as Omnikey) and Smargo!

thnx to OldSkul.

Display More

i got this error

root@xxxxxx : apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g ++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package g

E: Unable to locate package +

E: Regex compilation error - Invalid preceding regular expression

E: Couldn't find any package by regex '+'

E: Unable to locate package libssnglite-dev

Sorry there was a mistake: g ++, it's bad.

I've already fixed it, try it again.

Quote from zilizila

Sorry there was a mistake: g ++, it's bad.

I've already fixed it, try it again.

apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package libssnglite-dev

Sorry there was another mistake by copying.

I've already fixed it, try it again.