The SVN4267 update is available today. Provides multiboot on SD card or USB memory with unlimited number of slots (theoretically ) Supports decoders: SF8008, SF8008m, Ustym4kPro, Zgemma H9 Twin / Combo
Here I copy from zukon PKT LEAD DEVELOPER
Handling:
1 - download the update
2 - after rebooting the GUI enter blue / yellow (install manager)
the MENU key calls up a new multiboot manager.
It has 2 modes:
1 - simple - you can only set the number of slots, it has a 1.4GB / slot lock, it installs on the SD memory card by default
2 - advanced - you can freely select the disk, freely change the size of the slot
Suggested optimal calculations for the size of the slot for the card SD / USB memory:
4 GB - max 3 slots
8 GB - max 6 slots
16 GB - max 11 slots
32 GB - max 23 slots
64 GB - max 46 slots
128 GB - max 91 slots
Maximum calculation of the slot size for SD memory cards / USB:
1 GB = 1 slot, that is:
4GB - 4 slots
128GB - 128 slots The
new multiboot is supported by Inastall Manager, InfoCenter and Backup Manager plugins.
All images work except defineos / linuxos. ATV based image fixes:
6.4 -https://raw.githubusercontent.com/zukon ... ltiboot.py
6.5 - https://raw.githubusercontent.com/zukon ... ltiboot.py
7.0 - https://raw.githubusercontent.com/zukon ... ltiboot.py
If the image does not load, please upload (replace) it in the location: / usr / lib / python / Tools /
In recovery mode it shows slots (max 10) but you cannot install image on them.
Note - known problem on Zgemma H9 Twin / Combo - after selecting image and rebooting the decoder, it stops at boot. It's the fault of the box. It is enough to turn off the power for a few seconds with the button on the back of the housing and it starts .
Download