Amiko viper 4k51

There are 2 replies in this Thread which was already clicked 871 times. The last Post () by Hannibal_Lecter.

    Hi

    My Amiko viper 4k51 will not flash new image when i try to flash and press comes up to hold front button it goes into root and does nothing is there any fix for this'

    Thanks in advance

    1. Insert in the USB drive image of your choice
    2. Connect to the box with FTP over telnet (will work too, even if It's bootlooping, it works)
    3. use the command:
    4. ofgwrite -n <path-to-the-image>
    5. If this results with no errors, You can proceed to flash the image using this command:
    6. ofgwrite -k -r <path-to-the-image>

    Note: mount the usb drive in /media/hdd so the image path should start with it.


    For example: /media/hdd/amiko/u57 this is standard.

Amiko Viper 4K UHD Linux Enigma 2 2160p H.265 HEVC Multi-Stream DVB-S2X & DVB-C/T2 Combo Receiver

Download Amiko Firmware & Images. Enigma2 Team Support from OpenATV, OpenHDF, OpenPLi, OpenSPA, OpenViX, Open Vision & PurE2.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login