Hi everyone,
Currently I have an issue with my SATIP <-> Tvheadend <-> OSCam install.
Here is my OSCam Conf
[global]
logfile = stdout
[cache]
[cccam]
port = 18101
serverip = 255.255.255.255
nodeid = 0F0C9D3710131346
version = 2.0.11
[monitor]
port = 10101
aulow = 120
monlevel = 1
[newcamd]
key = 0102030405060708091011121314
port = 10000@09AC:000000;10001@0631:00000;10002@0639:00000;10003@0944:00000;10004@09AA:00000;10005@0B00:00000;10006@4A02:00000
keepalive = 1
mgclient = 1
[dvbapi]
enabled = 1
pmt_mode = 4
listen_port = 9000
boxtype = pc
user = tvh
[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255
[cccam]
#port = 12000
#cccversion = 2.1.2
#cccbuild = 2892
#reshare = 2
#ignorereshare = 1
#updateinterval = 240
#minimizecards = 0Here is my OSCam.user configuration
[account]
user = TZ6
pwd = 4FA
group = 1
[account]
user = user
pwd = pass
group = 1
[account]
user = tvh
pwd = tvh
au = 1
au = xxx
group = 1Here is my OSCam.server config
[reader]
label = xxx
protocol = cccam
device = xxx
user = xxx
password = xxx
inactivitytimeout = 30
disablecrccws_only_for = 1708:000000;1709:000000;09C4:000000;0500:050F00;0500:030B00,050F00;098C:000000;1884:000000;1841:000000
group = 1
disablecrccws = 1
cccversion = 2.1.3
ccckeepalive = 1Currently in TVHeadend (4.2.8-36) I have configured my SAT>IP to my satellite.
But for some reason not all the channel works, when it should be.
Example of a working descrambled channel
Index PID Type Language Details
0x00a1 / 161 PCR
0x0401 / 1025 PMT
5 0x0054 / 84 AAC eng
6 0x0055 / 85 AC3 eng
4 0x00a1 / 161 H264
2 0x0e17 / 3607 CA CAIDS: 0913:000000
1 0x0e16 / 3606 CA CAIDS: 0910:000000
3 0x0e15 / 3605 CA CAIDS: 09ac:000000
After filtering and reordering (without PCR and PMT)
Index PID Type Language Details
4 0x00a1 / 161 H264
5 0x0054 / 84 AAC eng
6 0x0055 / 85 AC3 eng
2 0x0e17 / 3607 CA CAIDS: 0913:000000
1 0x0e16 / 3606 CA CAIDS: 0910:000000
3 0x0e15 / 3605 CAExample of a channel that DOESN'T work
Index PID Type Language Details
0x00a7 / 167 PCR
0x0407 / 1031 PMT
5 0x006c / 108 AAC kor
6 0x04c5 / 1221 DVBSUB may
7 0x04c6 / 1222 DVBSUB chi
4 0x00a7 / 167 H264
2 0x0d09 / 3337 CA CAIDS: 0913:000000
1 0x0d08 / 3336 CA CAIDS: 0910:000000
3 0x0d07 / 3335 CA CAIDS: 09ac:000000
After filtering and reordering (without PCR and PMT)
Index PID Type Language Details
4 0x00a7 / 167 H264
5 0x006c / 108 AAC kor
6 0x04c5 / 1221 DVBSUB may
7 0x04c6 / 1222 DVBSUB chi
2 0x0d09 / 3337 CA CAIDS: 0913:000000
1 0x0d08 / 3336 CA CAIDS: 0910:000000
3 0x0d07 / 3335 CA CAIDS: 09ac:000000In my OSCam Log, there isn't anything showing up when decrypting the second channel, but the first one outputs the following:
2021/11/02 07:21:33 0CE53170 c (ecm) tvh (09AC@000000/0005/0005/B7:DCDB3CCE87192FDB91278A11455xxxxx): found (241 ms) by xxx
I have tried manually specifying Preferred CA PID, and turned on lock preferred CA ID on, and setting the PID. Still nothing. I'm referring to the second channel here.
But the first channel automatically updates it's Preferred CA PID when it successfully descramble the channel. And no more config was necessary.
I have also tried CA Stream Filters to filter out the two other CA (0913 and 0910), it still wouldn't decrypt.
Also in my LiveLOG of OScam, I have this output, not sure if it's part of the problem since I can decrypt channels with this, but felt like including it was necessary.
2021/11/02 07:15:40 0CE53170 c (client) encrypted newcamd:10000-client 127.0.0.1 granted (tvh, au=on (1 reader))
2021/11/02 07:15:40 0CE53170 c (newcamd) user tvh authenticated successfully (Tvheadend)
2021/11/02 07:15:40 0CE53170 c (newcamd) AU disabled for user tvhI'd appreciate any advice given.
I have also tried TVheadend 4.3.-19xx build in my Synology NAS, and manually adding the CCcam server into it. But it still won't descramble, and it only works with newcamd.
