OSCam cak7_support-test include (1856) For boxes [ arm, aarch64, mipsel, ]

There are 113 replies in this Thread which was already clicked 22,671 times. The last Post () by samur.

    samur

    misunderstanding :)


    sure working

    can you put here full example reader config

    and bin file without emu?

    Edited once, last by azaz1 ().

    Like 1

    1884


    Without Emu : https://www.linuxsat-support.c…4-10-3-0-without-emu-zip/


    ;

    1813 is working in global mode

    Card is starting in GLOBAL mode

    it is written in log

    1884 and 1861 working in unique mode but it is not in log ?

    p.s.

    thanx for bin @samur

    example conf for the case CWPK0 - CWPK welcom :)


    19:22:15 00000000 s (main) System name = Linux

    19:22:15 00000000 s (main) Host name = debian-server

    19:22:15 00000000 s (main) Release = 5.10.0-8-amd64

    19:22:15 00000000 s (main) Version = #1 SMP Debian 5.10.46-4 (2021-08-03)

    19:22:15 00000000 s (main) Machine = x86_64

    19:22:15 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3688433

    Warning: keyword 'sendnuid' in reader section not recognized

    19:22:15 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled

    19:22:15 00000000 s (main) signal handling initialized

    19:22:15 00000000 s (config) 3260 service-id's loaded in 8 ms

    19:22:15 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!

    19:22:15 00000000 s (config) HINT: --> use optimized lists from https://wiki.streamboard.tv/wiki/Srvid

    19:22:15 00000000 s (net) cccam: initialized (fd=4, port=xxx)

    19:22:15 00000000 s (reader) CYFRA-1813 [mouse] creating thread for device /dev/ttyUSB0

    19:22:15 00000000 s (main) waiting for local card init

    19:22:15 421A59E4 h (webif) webif: decompressed 180045 bytes back into 474608 bytes

    19:22:15 421A59E4 h (webif) HTTP Server running. ip=:: port=xxx

    19:22:15 6E828677 r (reader) CYFRA-1813 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)

    19:22:16 6E828677 r (reader) CYFRA-1813 [mouse] card detected

    19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6

    19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] Setting baudrate to 9600 bps

    19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] detected card in CAK6/Seca mode -> try switch to Nagra CAK7

    19:22:18 6E828677 r (reader) CYFRA-1813 [mouse] switch nagra layer OK

    19:22:19 6E828677 r (reader) CYFRA-1813 [mouse] ATR: 3B FF 95 00 FF 50 80 1C 44 4E 41 53 50

    19:22:19 6E828677 r (reader) CYFRA-1813 [mouse] Setting baudrate to 111600 bps

    19:22:20 6E828677 r (reader) CYFRA-1813 [mouse] Rom revision: DNASP400 RevI4G

    19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card has DT05_00

    19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] DT05_00 is correct

    19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card has DT05_10

    19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] card needs restart after 35999 CMDs

    19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] DT05_10 is correct

    19:22:21 6E828677 r (reader) CYFRA-1813 [mouse] Card is starting in GLOBAL mode

    19:22:22 6E828677 r (reader) CYFRA-1813 [mouse] ready for requests

    19:22:22 6E828677 r (reader) CYFRA-1813 [mouse] found card system nagra merlin

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] ROM: D N A S P 4 0 0

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] REV: R e v I 4 G

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] SER: ############

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] CAID: 1813

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] Prv.ID: 00 00 01 A0 (sysid)

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] -----------------------------------------

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] |id |tier |valid from |valid to |

    19:22:22 6E828677 r (reader) CYFRA-1813 [nagra merlin] +----+--------+------------+------------+

    *** buffer overflow detected ***: terminated

    Edited 3 times, last by azaz1 ().

    azaz1 another one: https://www.linuxsat-support.c…4-x86-64-without-emu-zip/

    ;

    Quote from samur

    this one working :)

    but when i try write emm from log

    21:02:49 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

    21:02:50 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

    21:02:50 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

    21:02:50 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

    21:02:54 7587EEA1 h (lock) WARNING lock http_lock (WRITELOCK) timed out.

    and webinterface freez for a while

    let it works i try more :)

    Edited once, last by azaz1 ().

    i think you are a show man ...;

    {

    go to : Viaccess, Irdeto, Nagravision ,....................then tell them about this:

    Quote

    This program is free software: you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation, either version 3 of the License, or

    (at your option) any later version.

    return 0 ;

    }

    Note: Stop spamming this thread please....!!!

    ;

    Edited once, last by samur ().

    Like 3

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login