help me with the settings to make oscam reshare within the same network

There are 16 replies in this Thread which was already clicked 4,177 times. The last Post () by master G.

    • Official Post
    Quote from BIifana

    Can anyone help me with the settings to make oscam reshare within the same network?

    Assuming you want to use the CCcam protocol follow this:


    In oscam.conf you must have the cccam section added.

    Change the port (12000) to what whatever you want to use for the cccam protocol.

    Code
    [cccam]
port = 12000

    An account for the local receiver should be created in oscam.user.

    Add your own username and password.

    Code
    [account]
user = local
pwd = receiver
group = 1

    C line for the client receiver on your network:

    C: ip.address.of.server 12000 local receiver


    just put these parameters in oscam.conf and oscam.user and then in the receiver box put the C line?

    And for newcamd lines how do I?


    regards

    • Official Post
    Quote from BIifana

    just put these parameters in oscam.conf and oscam.user and then in the receiver box put the C line?

    Correct.

    Quote from BIifana

    And for newcamd lines how do I?

    Add the newcamd protocol to oscam.conf.

    Code
    [newcamd]
key = 0102030405060708091011121314
port = 34000@0000:000000

    Change the port (34000) to what whatever you want to use for the newcamd protocol.


    Add an account in oscam.user just like you did for CCcam client.


    N line for the client receiver on your network:

    N: ip.address.of.server 34000 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    Thanks a lot for the help.

    but if I want to share only one line that I have in oscam.server, how do I do it?

    Are the parameters in oscam.conf for the newcamd line the ones you put?

    Are these key and door?

    • Official Post
    Quote from BIifana

    but if I want to share only one line that I have in oscam.server, how do I do it?

    Whatever you are allowed to reshare will automatically be passed to the client.

    The [reader] and [account] must have a group that match - example: group =1

    Quote from BIifana

    Are the parameters in oscam.conf for the newcamd line the ones you put?

    Yes they are example parameters that you should just copy and paste into oscam.conf

    Quote from BIifana

    Are these key and door?

    Dunno what this means.

    Em


    for example if you have 2 lines on oscam server but if you only want to share one line, just put it in the group field?

    If the line I want to share is from group 1 in user meto group 1 and only that one is shared?

    Em

    Quote from master G

    Correct. Have a separate group on each reader, example: group = 1 & group = 2.

    If you want the account to access the reader with group 1, add group = 1 or if you want it to access reader with group 2, add group = 2

    If you want the account to access both readers add group = 1,2


    great, i figured it out.

    And is there a way on the server box to be able to see what the client box is seeing?

    How do I see in the server box what is being seen in the client box?

    Em

    Quote from master G
    Quote from BIifana

    Como vejo na caixa do servidor o que está sendo visto na caixa do cliente?

    Usando a interface web oscam.

    Em oscam.conf procure por [webif] e o httpport

    Em um navegador digite o endereço IP do servidor seguido do : httpport - exemplo:192.168.1.100 : 8888


    Thank you very much.

    Tomorrow I will express.

    But no one knows I'm re-sharing?

    The only thing I can change is the cccam port and newcamd?

    Is the newcamd key the one you said to put?

    Edited once, last by master G: Translate! ().

    • Official Post
    Quote from BIifana

    But no one knows I'm re-sharing?

    Your provider will be able to see the extra traffic or double login. If you don`t have reshare your client won`t be able to view anything and your line/share will probably be disabled.

    Quote from BIifana

    The only thing I can change is the cccam port and newcamd?

    Correct. Also your own user and password in [account] but you can use mine as an example.

    Quote from BIifana

    Is the newcamd key the one you said to put?

    Yes, you can change it to your own, but don`t complicate things.

    Thank you for your help.

    Quote from master G

    When you look at the oscam webinterface on the server can you see the client box making a connection?

    If your provider doesn`t allow resharing the server won`t be able to share anything to the client box.


    So that just might be it.

    The provider does not allow sharing.

    Because I did as you said I put in oscam.conf the port 12000 and in oscam.user I created the account "user,pwd,group".

    Then in the client box I created the line c: ip of the server box 12000 local receiver and did not open anything.

    How do I know if the provider allows sharing?

Your resource for OSCam softcam

Find configs, downloads, tutorials, and support for setting up and optimizing this open-source card server with wide protocol compatibility. Master the versatile OSCam softcam. Access support, configs, tutorials, and downloads for open-source card sharing and multi-protocol server management.