blackscreen 0B00

There are 10 replies in this Thread which was already clicked 2,705 times. The last Post () by donli.

    openatv 7.0 latest oscam cccam 0B00 16E 11.5db


    Please give some hints to solve the problem


    ecm time, cw0, cw1 (ping) looks like good but no sound/image

  • master G

    Approved the thread.

    Hi.


    CAID 0B00 is a very comprehensive description of the card.


    You must enter the name of the provider or the country. Then someone who knows your provider may be able to advise


    This CAID 0Bxx represents the Conax encoding type. You get an EMM packet write to your card from the AV-stream, for the purpose of AutoUpdate (AU) of your Entitlements... and then it should work. However, in other circumstances, various problems may arise, usually with card sharing protection (too much ECM decoding requests) or specific other channel decoding protection (ECM decoding needs the pairing - between the card and the SoftCAM).

    0B00 on 16E there are some of them :)


    some more infos about your Provider would be good otherwise there is a very low chance that anyone can help you

    I am Still on the Search for CAID:0911 for TTV on 16E if anybody see this anywhere let me Know :D

    Send Not from Taptalk or so Sent From 127.0.01 or for Modern Peepz ::1

    :saint:

    thumbs up 1

    maybe skip crc can help you last year there was some changes


    Code
    [DigiAlbNoCrc]
disablecrccws_only_for_exception = 1
caid = 0B00
provid = 000000
srvid = 05C8,05DC,044C,0578,0488,058C,0424,05A0,049C,04D8

    you can try and give Response

    I am Still on the Search for CAID:0911 for TTV on 16E if anybody see this anywhere let me Know :D

    Send Not from Taptalk or so Sent From 127.0.01 or for Modern Peepz ::1

    :saint:

    Edited once, last by Kartenali ().

    thumbs up 1

    Looked for the Services of them maybe all inside now


    Code
    [my_service]
caid                 = 0B00
provid               = 000000
srvid                = 027F,03E8,03E9,03EA,03EB,03EB,03EC,03EC,03ED,03ED,03EE,03EF,03EF,03F1,03FC,03FD,03FD,03FE,03FF,03FF,0401,0402,0403,0404,0406,0407,040A,0410,0412,0424,0438,044C,0460,0488,049C,04D8,04EC,0578,058C,05A0,05B4,05C8,05DC,05F0,0604,07D0,07DA,07E4,07EE,0834,083E,0848,0852,085C,0866,0870,087A,0884,088E,0898,08A2,08AC,08B6,08C0,08CA,0A91,0A92,0A9C,0AAB,0C80,0CA8,0CBC,0CE4,1040,10A4,10E0,116C,1298

    I am Still on the Search for CAID:0911 for TTV on 16E if anybody see this anywhere let me Know :D

    Send Not from Taptalk or so Sent From 127.0.01 or for Modern Peepz ::1

    :saint:

    Edited once, last by Kartenali ().

    thumbs up 1

    Hi again.


    Follow this older thread please:

    Thread
    Digitalb Conax OScam Config
    I NEED HELP ADMIN I NEED Digitalb Conax OScam Config FOR UBNTU ANY HELP FOR ME PLS
    sat100


    According to an old discussion, you should also have the following in the Oscam configuration, in the oscam.server file:

    Code
    caid            = 0B00
emmcache        = 1,3,2
pincode         = 0000
ident           = 0B00:000000
ecmwhitelist    = 0B00:4E,5D,6E,66,69,FFFFFFFF


    I also found information on Google (https://www.google.com/search?q=oscam+settings+for+DigitAlb) that some DigitAlb channels have been moved to IRDETO 2 encryption mode (i.e. CAID 0609, at 10887Hz frequency), from the original CONAX mode (CAID 0Bxx). Isn't this your case too ?


    Do you also have... in your Oscam... as I mentioned last time... a properly set up... enabled and functional AutoUpdate/AU (for writing EMMs packets to your card) ?

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login