Flatdish issue on Danish DR channels ?

If you have the OnePlace box from CD/Allente it works in hybrid mode.

This means that your box prefer to recive the channels as IPTV instead of satellite.

That can be the reason why you have all channels on the OnePlace and not the Vu+Duo2

Another thing is the LNB in your new dish. If it's a Unicable/SatCR combi you should also check that your lnb is connected to the Universal port

Unicable/SatCR does not work on your Duo2

If the OnePlace is connected to your network it's in hybrid mode.

You can also go to settings and look at the Sat/Dish/Lnb settings.

Here you see type of lnb connected and signal strenght.

Nope you are correct. No need for a dish when in hybrid mode.

Yes I use my without a dish. And through the thirdparty source I also stream all my Swedish channels from my old dm7080 where i decode the channels with Oscam.

So on the OnePlace I have the Norwegian Channels as IPTV and the Swedish channels as internal stream source without a Sat dish in the bedroom

The thirdparty source settings can be find under the Channel Search settings. No need to install any apps

Here is your problem with your Duo2. I am not 100% sure bit it does not support SatCR lnb in your dish.

But you wrote that it hade 4 and not 3 ports?

When I read about the dish I cant find any information if it's Only SatCR or Combi.

SelfsatH22dCSS3 flat satelittantenne 24 User Band dCSS3, Smart Split Function - Alcadon AS

Yes then we can confirm it's not a combi lnb but pure SatCR/Unicable. So think that the tuners don't work with this type of lnb.

Hi

I spoke to a friend who has a Duo2 you can use the lnb but you need to setup the tuner in advance mode and select one of the free userbands.

Then do the same with tuner 2 and you at least should have 2 working tuners.

I will try those settings later tonight on my Solo2 and see how the settings should be apply.

Hi

This is my settings working for Tuner A.

If you want to use Tuner B you need to choose another Userband For that tuner and also create a connection to Tuner A

Tuner B do not need a Cable since it's internal connected to Tuner A.

d4fbf5e7.jpg

1b602a2c3.jpg

You should use Channel 5 and 6 on your Duo2 the first 4 are already used by your OnePlace.

You can use Manufactor Inverto and select channel 3 and 4 even if they are taken by the Oneplace.

I have tested my self and seems to work just fine.

Channel 1 is used by the Oneplace for live TV. The other 3 are for recordings.

Channel 3 and 4 would only be used if you watch one live channel on the Oneplace and record from more then 1 other channel