Flatdish issue on Danish DR channels ?

There are 23 replies in this Thread which was already clicked 2,834 times. The last Post () by seagen.

    I have full CD package running VUDuo2 with dvbS2 tuners, and recently moved to new location.

    Installed a flatdish because of visual looknon the House.


    My Old setup included standard 60cm dish

    New setup it with new flatdish - (signal 12db)



    Issues :

    Cant search / find TV2 news, Zulu

    When trying to see DR1,DR2,Ramasjang and other DR related channels , i get error and no image.


    When using the original Android box from supplier (that lavks a million features) i Can see all channels flawless.


    Does the original box have some aktive signal enhancer that makes the difference ?


    Or any suggestions to my flatdish issues on the VU+ ?

    • Official Post

    If you have the OnePlace box from CD/Allente it works in hybrid mode.

    This means that your box prefer to recive the channels as IPTV instead of satellite.

    That can be the reason why you have all channels on the OnePlace and not the Vu+Duo2


    Another thing is the LNB in your new dish. If it's a Unicable/SatCR combi you should also check that your lnb is connected to the Universal port

    Unicable/SatCR does not work on your Duo2

    -------------------------------------------------------------------------------------------------

    Everything in life that's any fun is either immoral, illegal or fattening

    If you want to support the Linuxsat-Support forum

    Become a VIP Member

    • Official Post

    If the OnePlace is connected to your network it's in hybrid mode.

    You can also go to settings and look at the Sat/Dish/Lnb settings.

    Here you see type of lnb connected and signal strenght.

    • Official Post

    Yes I use my without a dish. And through the thirdparty source I also stream all my Swedish channels from my old dm7080 where i decode the channels with Oscam.


    So on the OnePlace I have the Norwegian Channels as IPTV and the Swedish channels as internal stream source without a Sat dish in the bedroom

    The thirdparty source settings can be find under the Channel Search settings. No need to install any apps

    If i fx Connect Vu+ duo2 with OpenPLi


    Can someone tell me the Tuner setup for the flatdish

    Selfsat h22dcss3


    I read something about setting multiple LNB In the advance settings, But cant figure out the settings.


    I see In the oneplace that the udserband 9-10-11-12 is used @ frec 1260/1305/1350/1475


    But i need help where and What to type In the settings on the PLi image/tunes settings


    I Can find all channels But tuning faults it says :/

    • Official Post

    Here is your problem with your Duo2. I am not 100% sure bit it does not support SatCR lnb in your dish.

    But you wrote that it hade 4 and not 3 ports?


    When I read about the dish I cant find any information if it's Only SatCR or Combi.


    SelfsatH22dCSS3 flat satelittantenne 24 User Band dCSS3, Smart Split Function - Alcadon AS

    • Official Post

    Yes then we can confirm it's not a combi lnb but pure SatCR/Unicable. So think that the tuners don't work with this type of lnb.

    • Official Post

    Hi

    I spoke to a friend who has a Duo2 you can use the lnb but you need to setup the tuner in advance mode and select one of the free userbands.

    Then do the same with tuner 2 and you at least should have 2 working tuners.


    I will try those settings later tonight on my Solo2 and see how the settings should be apply.

    Great. Let me see screenshot from your settings.


    Meanwhile i read something about fcb tuner for the multiband lnb.


    But should be able to setup In Vu+

    • Official Post

    Hi


    This is my settings working for Tuner A.

    If you want to use Tuner B you need to choose another Userband For that tuner and also create a connection to Tuner A

    Tuner B do not need a Cable since it's internal connected to Tuner A.


    d4fbf5e7.jpg


    1b602a2c3.jpg

    • Official Post

    You should use Channel 5 and 6 on your Duo2 the first 4 are already used by your OnePlace.

    • Official Post

    You can use Manufactor Inverto and select channel 3 and 4 even if they are taken by the Oneplace.

    I have tested my self and seems to work just fine.


    Channel 1 is used by the Oneplace for live TV. The other 3 are for recordings.

    Channel 3 and 4 would only be used if you watch one live channel on the Oneplace and record from more then 1 other channel

Chat about everything else!

A friendly forum for off-topic discussions, random questions, and community bonding. Your space for conversations outside our main categories. Discuss hobbies, news, games, or anything else with the wider community.