I found solution for anyone who has a spider-x 4k and wants Enigma2
that works well with Openatv-6.4 and Openatv-7.0
First, if you have octagon sf8008 : you can enjoy spidercam server and Reviptv servers on define.
Method1: For those who own a Spider-x 4k device and SF-8008
Open Winscp or DCC
enter IP device spider-x 4k : 192.168.8.100
user: root
pass: root
And transfer necessary files to their paths on sf8008
1- First, move the files Config folder Spider-x 4k that contain Revcam server :
/home/data/gx/local/oscam-2/ ---> to sf8008 path. /home/gx/local/oscam/
and give it the necessary permissions chmod 0755
2- rename the OSCAM bin file to oscam-gx
make a copy and paste it ---> to sf8008 path. /home/usr/local/bin/
and give it the necessary permissions chmod 0755
3- Need to change MAC ADDRESS
Open Winscp
and open Putty
user: root
pass: root
And enter code:
ifconfig eth0 down
ifconfig eth0 hw ether A0BB3EXXXXXX
ifconfig eth0 up
ifconfig eth0 grep HWaddr
After executing the process,
we notice that the Mac Address has changed to the Octagon SF8008, on defineos 6.4
But when booting, the device will go back to the old Mac.
4- open
CAM SETTINGS
CAM MODE
and choose (default) OSCAM or OSCAM
Revcam sharing server will work on sf8008
5- For Reviptv
There is a Stalker portal in which you can put your spider-x data entry
in Reviptv1 , Reviptv2 , Reviptv3, Reviptv4. and iptv server will work fine.
Method 2: For those who own a Spider-x 4k device and other enigma2 device than SF-8008
Dinobot u5 mini
Qviart-dual
zgemmah9s se
You can only enjoy spidercam sharing server, because Stalker portal enigma2 for Zaki does not work on Reviptv paid servers.
1- You install an OPENATV 6.4 . image or OPENATV 7.0 . image
2- Heading towards
MENU
SETUP
SYSTEM
NETWORK
DEVICE SETUP
LAN CONNECTION
Network adapter MAC settings
MAC address
and enter your mac spider-x data
A0BB3EXXXXXX
SAVE
The device will boot up with the new Mac address data
and entry will be permanently and not change when the device is rebooted.
3- move all content OSCAM folder from spider-x device , it contains your spidercam server subscription files.
to path : Enigma2 OSCAM folder
path: /etc/tuxbox/config/spider-x
and give it the necessary permissions chmod 0755
4-rename OSCAM bin file to spidercam
move it to path: /usr/bin/
and give it the necessary permissions chmod 0755
5- Create file Softcam.spider-x script and put it to path: /etc/init.d/
give it Chmod 0755.
6-enter Menu softcam on openatv 6.4
choose Softcam.spider-x
Save
restart
and revcam sharing server (spidercam) will work fine.
Download Link : softcam.spider-x and spidercam