openatv-6.4-amikalien-50502022_usb for spark 7162 built by ahmed gazye

openatv-6.4-amikalien-50502022_usb for spark 7162 built by ahmed gazye

in the beginning, many thanks to those from whom I learned how to Build images on Core oe-alliance for E2 devices

Dear brothers Hussein, Radwan and Atef

I built the raw version with feed in 5/5/2022 on Core oe-alliance for openatv

eb421abd148e70174915.jpg

a814a631.jpg

You must set a new password to be able log in by DCC

go to >   menu>setup> system >network>password setup

They changed the password, for example

dreambox, root, or black.....etc

Then save with the green button

Installing the CacheFlush or ClearMem plugin, or both, and setting it to work every 5 minutes automatically

Until you can deal with it asily

The picture from my device

bfda1d1230c5714.jpg

Enjoy & Good luck

Dear brother In order to be able to download the imo and softcam and use the special version of the panel follow that

version with feed This is one of the most important things in the version. You can download everything you want from the server version In order to download the softcam& emus from the server version, follow the following

First write this in telnet Until the softcam is installed in the plugin list on the server version

Code

wget -O - -q http://updates.mynonpublic.com/oea/feed | bash

After that, open the plugin menu and press the green button to enter the plugin menu on the server version. You will find that the softcam will appear in the menu. Download what you like

After that Go to the main menu, then the info panel You will find that a softcam setp appeared to you The panel will show you what you previously downloaded from emu from the server version, use it as you like

Enjoy & Good luck

Quote from adammido

Wifi work my brother

Unfortunately I didn't test it because I'm working through lan

For those who is facing a problem in run the encrypted channels on this image

replace the attached file pti.ko to /lib/modules/2.6.32.71_stm24_0217/extra/pti

It is better to add a file pti.ko you are not working on the version as long as you are working on the external flash and you are on any another version go to

media / hdd or usb( Depending on the plug you are using)

You will find the copies installed on the external flash all

Go to the name of the version, then

/lib/modules/2.6.32.71_stm24_0217/extra/pti

This method is safer to avoid problems

Attached is an extracted file pti From openatv6.4