[Samur Private OSCam] - Request for compilation, questions and help !!!

samur: Yes, I understand. I am grateful to you for compilation.

trying to get init on irdeto v7 and card fails with error

2025/04/23 01:18:57 7AF03230 r (reader) [mouse] card system not supported

2025/04/23 01:18:57 7AF03230 r (reader) [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

2025/04/23 01:18:57 7AF03230 r (reader) [mouse] card initializing error

Quote from goblwarsdf

trying to get init on irdeto v7 and card fails with error

2025/04/23 01:18:57 7AF03230 r (reader) [mouse] card system not supported

2025/04/23 01:18:57 7AF03230 r (reader) [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

2025/04/23 01:18:57 7AF03230 r (reader) [mouse] card initializing error

how about internal reader?

internal reader same

which caid is this?

Quote from Fenix11

Greetings.

I'm not that expert on these Nanos issues, but with my limited knowledge, I've noticed that GTMedia opens some 55W and 58W channels with the current PowerVu system. I've noticed that the channels with the Nanos 01 accompanied by the Nano 08 are the ones that are opening but without audio. The others, like the MUX channels of the Studio Universal 58W, only contain Nano 01 with the other Nanos at 00. For example (0E00 01 00 00). Here are some reference images.

I've been analyzing and observing some changes in the ECM flows, among other changes, when I was comparing the old PowerVu cisco software with the new one.

Best regards.

Display More

Is there any progress on this?

Quote from carinobra

Quote from Fenix11

Greetings.

I'm not that expert on these Nanos issues, but with my limited knowledge, I've noticed that GTMedia opens some 55W and 58W channels with the current PowerVu system. I've noticed that the channels with the Nanos 01 accompanied by the Nano 08 are the ones that are opening but without audio. The others, like the MUX channels of the Studio Universal 58W, only contain Nano 01 with the other Nanos at 00. For example (0E00 01 00 00). Here are some reference images.

I've been analyzing and observing some changes in the ECM flows, among other changes, when I was comparing the old PowerVu cisco software with the new one.

Best regards.

Display More

Is there any progress on this?

Display More

I imagine everyone must be doing their own research and testing; at any moment, someone could come along with other discoveries about this new system. I, too, continue working to advance this with the little knowledge I have. I think if we were more united on this issue, we would have made a lot of progress.

Thanks.

Quote from samur

Quote from bega0181

.....I am also interested in how to activate anti cascade?.....

I do not enable 'anti cascading' in my binaries and it stays like that .

Display Spoiler

Anti-cascading support: no

Thanks,

hello friend need build ca7k oscam help please in dreambox 800 hd se mips

thiaba - What about here ?

Thread

OSCam For Mipsel Boxes [ VuPlus HD, DM HD, ], [Private build]

version with (cak7, libusb, pcsc, emu) ;
;

linuxsat-support.com/thread/152600/

samur

Feb 23rd 2022

Quote from Fenix11

Quote from carinobra

Quote from Fenix11

Greetings.

I'm not that expert on these Nanos issues, but with my limited knowledge, I've noticed that GTMedia opens some 55W and 58W channels with the current PowerVu system. I've noticed that the channels with the Nanos 01 accompanied by the Nano 08 are the ones that are opening but without audio. The others, like the MUX channels of the Studio Universal 58W, only contain Nano 01 with the other Nanos at 00. For example (0E00 01 00 00). Here are some reference images.

I've been analyzing and observing some changes in the ECM flows, among other changes, when I was comparing the old PowerVu cisco software with the new one.

Best regards.

Display More

Is there any progress on this?

Display More

I imagine everyone must be doing their own research and testing; at any moment, someone could come along with other discoveries about this new system. I, too, continue working to advance this with the little knowledge I have. I think if we were more united on this issue, we would have made a lot of progress.

Thanks.

Display More

How can I help?

Quote from carinobra

Quote from Fenix11

Quote from carinobra

Quote from Fenix11

Greetings.

I'm not that expert on these Nanos issues, but with my limited knowledge, I've noticed that GTMedia opens some 55W and 58W channels with the current PowerVu system. I've noticed that the channels with the Nanos 01 accompanied by the Nano 08 are the ones that are opening but without audio. The others, like the MUX channels of the Studio Universal 58W, only contain Nano 01 with the other Nanos at 00. For example (0E00 01 00 00). Here are some reference images.

I've been analyzing and observing some changes in the ECM flows, among other changes, when I was comparing the old PowerVu cisco software with the new one.

Best regards.

Display More

Is there any progress on this?

Display More

I imagine everyone must be doing their own research and testing; at any moment, someone could come along with other discoveries about this new system. I, too, continue working to advance this with the little knowledge I have. I think if we were more united on this issue, we would have made a lot of progress.

Thanks.

Display More

How can I help?

Display More

It's great to see that question. 😎Do you know anything about programming, development, or what skills you have for this hobby? Because it would be great to have a team with different skills for this project. Together, we can achieve what is impossible for some.💪

Quote from Fenix11

Quote from carinobra

Quote from Fenix11

Quote from carinobra

Quote from Fenix11

Greetings.

I'm not that expert on these Nanos issues, but with my limited knowledge, I've noticed that GTMedia opens some 55W and 58W channels with the current PowerVu system. I've noticed that the channels with the Nanos 01 accompanied by the Nano 08 are the ones that are opening but without audio. The others, like the MUX channels of the Studio Universal 58W, only contain Nano 01 with the other Nanos at 00. For example (0E00 01 00 00). Here are some reference images.

I've been analyzing and observing some changes in the ECM flows, among other changes, when I was comparing the old PowerVu cisco software with the new one.

Best regards.

Display More

Is there any progress on this?

Display More

I imagine everyone must be doing their own research and testing; at any moment, someone could come along with other discoveries about this new system. I, too, continue working to advance this with the little knowledge I have. I think if we were more united on this issue, we would have made a lot of progress.

Thanks.

Display More

How can I help?

Display More

It's great to see that question. 😎Do you know anything about programming, development, or what skills you have for this hobby? Because it would be great to have a team with different skills for this project. Together, we can achieve what is impossible for some.💪

Display More

I just used to code in VB a long time ago ... But, I have a C-band dish pointed to 58W, a TV Headend server and could help testing

Quote from carinobra

Quote from Fenix11

Quote from carinobra

Quote from Fenix11

Quote from carinobra

Quote from Fenix11

Greetings.

I'm not that expert on these Nanos issues, but with my limited knowledge, I've noticed that GTMedia opens some 55W and 58W channels with the current PowerVu system. I've noticed that the channels with the Nanos 01 accompanied by the Nano 08 are the ones that are opening but without audio. The others, like the MUX channels of the Studio Universal 58W, only contain Nano 01 with the other Nanos at 00. For example (0E00 01 00 00). Here are some reference images.

I've been analyzing and observing some changes in the ECM flows, among other changes, when I was comparing the old PowerVu cisco software with the new one.

Best regards.

Display More

Is there any progress on this?

Display More

I imagine everyone must be doing their own research and testing; at any moment, someone could come along with other discoveries about this new system. I, too, continue working to advance this with the little knowledge I have. I think if we were more united on this issue, we would have made a lot of progress.

Thanks.

Display More

How can I help?

Display More

It's great to see that question. 😎Do you know anything about programming, development, or what skills you have for this hobby? Because it would be great to have a team with different skills for this project. Together, we can achieve what is impossible for some.💪

Display More

I just used to code in VB a long time ago ... But, I have a C-band dish pointed to 58W, a TV Headend server and could help testing

Display More

That sounds great. I don't know much about servers, so it's always good to have different resources. If you have any updates, we'll be in touch.

Quote from rifranco202325

Hola alguien de Latinoamérica que usa Movistar 1861 y lo tiene funcionando en HD con algún binario actualizado con PCSC

I have it working with the current version

Quote from nissu

Quote from rifranco202325

Hola alguien de Latinoamérica que usa Movistar 1861 y lo tiene funcionando en HD con algún binario actualizado con PCSC

I have it working with the current version

Hi, what version are you using and which one did you compile with?

Quote from samur

rifranco202325

You are about more than 6 months asking for a binaries with pcsc support in all forums

and when i saw your different logs in different forums you still don't have correct keys to operate your card

specially with the channels using Unique pairing ...

So, please open you own thread and ask there Or ask nissu in private to help you...

###

Note: this thread is not for discussing the bugs or problems of Public OSCam.

Thanks,

Display More

Hi, how are you? I've got it working now, and as I mentioned, it's in the OSCam binary: 1.20_svn, build: r11578, compiler: x86_64-linux-gnu-pcsc. It only works there; it works as SD/HD. I've tried several versions, and none of them worked for me. Maybe they changed some specific code that the current versions no longer support.
pasted-from-clipboard.png

Quote from rifranco202325

Quote from samur

rifranco202325

You are about more than 6 months asking for a binaries with pcsc support in all forums

and when i saw your different logs in different forums you still don't have correct keys to operate your card

specially with the channels using Unique pairing ...

So, please open you own thread and ask there Or ask nissu in private to help you...

###

Note: this thread is not for discussing the bugs or problems of Public OSCam.

Thanks,

Display More

Hi, how are you? I've got it working now, and as I mentioned, it's in the OSCam binary: 1.20_svn, build: r11578, compiler: x86_64-linux-gnu-pcsc. It only works there; it works as SD/HD. I've tried several versions, and none of them worked for me. Maybe they changed some specific code that the current versions no longer support.
pasted-from-clipboard.png

Display More

oscam is not the problem but setting