is it possible to have 11711 emu version with pcsc for mipsel please
Samur's OSCam - Request for compilation, questions and help !!!
-
- Various Support
- samur
- Thread is marked as Resolved.
-
-
is it possible to have 11711 emu version with pcsc for mipsel please
check the table here:
(OSCam-EMU Device Compatibility List !!!)
;
-
Hello dear managers and friends, I have a problem with Oscam emu emulators in using cccam account. In some channels, for example, Nc+ package channels and +18 channels in Hotbird satellite, sometimes after 2 to 3 minutes and sometimes after 3 to 5 minutes, the channel suddenly closes and does not open again. In two cases, the channel opens again, either I stay on the channel for a very long time, or if I immediately restart the Oscam emu emulator, the channel opens. I now have Dreambox 7020 HD with the new version of Open pli image 11.3 and Oscam emu 11719 emulator. please help me It is really painful to watch the channels. Thank you for helping me.
-
I can't install this version of Oscam on my box (Octagon sf8008 4k), can someone explain me how to install this?
oscam-11719-798.armv7ve-libusb
or
oscam-11719-798.armv7ve-libusb-pcsc
Read here : RE: Request for compilation OSCam, questions and helps !!!
-
I can't install this version of Oscam on my box (Octagon sf8008 4k), can someone explain me how to install this?
oscam-11719-798.armv7ve-libusb
or
oscam-11719-798.armv7ve-libusb-pcsc
Read here : RE: Request for compilation OSCam, questions and helps !!!
Thanks!
I don't understand what the difference between are:
11718 (trunk)
and the version
11719
I don't see any difference in behavior between them.
-
hello dear
I need enigma2-softcams-oscam-all-images_11.719-emu-r798-arm+mips_all.ipk
latest oscam for vu plus SOLO SE HD for sky DE
tanks -
-
hi dear
I need OSCam-11719-798 ipk for my VU+ solo SE with OBH 4.2 image
your metod in post #220 not active and don't answer to me
files in this Adress was ok to me. "https://www.linuxsat-support.com/thread/130706-oscam-emu-all-images-mips-arm-ipk-deb/?pageNo=6"
but to 11715 version finished in post #109
please update this to 11719
thanks
-
Hi. Make please OSCam emu -11719-798 ipk for my VU+ Ultimo 4k on BlackHole. softcams-oscam_11719-EMU-r798_all - not work. Version from MOHAMED_OS OSCam V117.19 not work too
-
on BlackHole
Old image is probably missing some dependency.
Install the ipk in telnet and show us the error, if any.
-
Thanks for fast answer. yeah im got error
softcam looks like already installed but he didnt work. BH version is latest 3.1.0 L. 11718 works fine only if install 11714 first. maybe new version not contain some lib
-
Thanks for fast answer. yeah im got error
It looks like it installed and the error is coming from a previous oscam installation.
I think that oscam could be from here ~ OScamicam_11718-V9-Kitte888-V17 _All ipk & Settings
You could try uninstalling the old version with opkg remove enigma2-plugin-softcams-oscamicam and try again.
Starting oscam in telnet will also show any errors ~ /usr/bin/OSCam_11719-r798 -b
Look in /usr/bin/ and compare the version, if its not OSCam_11719-r798 change the command line to the correct version number.
-
remove oscamicam error. 11719 looks like missing libraries. OSCam_11719 -r798 showing in usr/bin
-
looks like missing libraries.
I`ve attached different versions of libc.
You must backup the image before trying these files, because there is always a risk it could damage the image.
-
error - Not selecting libc6 2.28 due incompatible architecture. same with other files
-
error - Not selecting libc6 2.28 due incompatible architecture. same with other files
Now you have 2 choices. Continue to use older versions of oscam or flash a different image that has the updated libraries.
The last Black Hole image is nearly 3 years old now, and development has stopped.
-
oscam and other files for this architecture - cortexa15hf-neon-vfpv4 never worked on BH. Works perfectly on fresh firmware 11.714-emu-r798-arm+mips_all and 11718 install over 11714. I think it still possible make 11719 version worked on BH if add correct files. Maybe developer like MOHAMED or you can do something. enigma2-plugin-softcams-oscamicam_11719-V9-Kitte888-V20Rev_all.ipk still works. so trouble only in 11719 emu version
Yeah. VU+ Ultimo 4k its other architecture -armv7ahf-vfp-neon. Need libs for this architecture.
-
Yeah. VU+ Ultimo 4k its other architecture -armv7ahf-vfp-neon
Look on this image feed here, it uses the architecture i posted ~ http://titannit.dyndns.tv/6.3/…k/cortexa15hf-neon-vfpv4/
I think there is a list of dependencies on the AJPanel plugin that might be worth trying.
Try OpenBH, you get everything you enjoy about Black Hole but with the addition of the latest updates from OE-Alliance support.
-
Im many times trying OBH and was think about they make OBH better in new versions but no. I dont like this firmware, no youtube. buttons on remote works not good and overall firmware looks like amateur. BH much better like a premium product.
If oscamicam_11719-V9-Kitte888-V20Rev_all.ipk works if possible to do some with 11719 emu? problem with new compiler? Change list from 11718 not looks too long.
If possible to do some i can test any version and write feedback or errors.
-
Please, where are oscam config files stored in OpenATV v7.3 after installation of oscam-emu from the online plugin feed?
In the past they have been im somewhere like /etc/tuxbox/config/oscan-emu
For OpenATV v7.3 there is not a config folder and search of box files with filezilla not find them?
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!