Samur's OSCam - Request for compilation, questions and help !!!

There are 820 replies in this Thread which was already clicked 127,301 times. The last Post () by leonlive.

  • Notice that the first config code is yours,...

    i see that you use pcsc card reader and it's good to use latest version from here ...!!!

    because some old versions had a problem with pcsc protocol and it's fixed in 11734.

    With "detect_seca_nagra_tunneled_card= 0" No changes.





    With "detect_seca_nagra_tunneled_card= 2" I see a "ERROR: Not all required CAK7 parameters are set!" above "card system not supported" message.

    That lead me think if "mod50" and "data50" is a mandatory on your building.



    Card settings right now: (some settings was autoremoved, I think is because is default ones)

    Best regards.

  • 2024/03/10 15:51:18 49C59973 r (reader) Reader-0 [pcsc] ERROR: Not all required CAK7 parameters are set!

    You still have a problem with your config...


    and as i said before add your keys from web inf one by one save and restart

    That lead me think if "mod50" and "data50" is a mandatory on your building.

    Yes, all parameters are mandatory.

    add "mod50" and "data50" they are missing in the config.

    ;

  • Understand, then your CAK7 release will not work with my card :(

    I have not these mod50 and data50 settings on the server that is working right now. Image attatched.

    .oscam reader.png


    Best regards.

  • I have not these mod50 and data50 settings on the server that is working right now. Image attatched.

    why it will not work ? add these keys:

    Code
    data50                        = B6711C868C3EE72533A4E08C1364B83AEEFDEBE9FB54156A8776D872CBC41FF2E5EA2CBAF4F26A58C521EC53E310FC494354E49ECE6CD0F9631B724FAB0C8BAEC1F66C346AD2DB1CB3871AF44C1E1592
    mod50                         = DB9E1F1BD23C6153444E444D8E6C471E162EC63C599D44F476E0D40C3840E0FDB7B63D174DD73B575543983F2F2DFB94E3644958AE642C91636A6BE55528478EB7A422479598C68E6F1FC9D647BBC4D5
  • I have not these mod50 and data50 settings on the server that is working right now. Image attatched.

    why it will not work ? add these keys:

    Code
    data50                        = B6711C868C3EE72533A4E08C1364B83AEEFDEBE9FB54156A8776D872CBC41FF2E5EA2CBAF4F26A58C521EC53E310FC494354E49ECE6CD0F9631B724FAB0C8BAEC1F66C346AD2DB1CB3871AF44C1E1592
    mod50                         = DB9E1F1BD23C6153444E444D8E6C471E162EC63C599D44F476E0D40C3840E0FDB7B63D174DD73B575543983F2F2DFB94E3644958AE642C91636A6BE55528478EB7A422479598C68E6F1FC9D647BBC4D5

    Yeah, card is ON. But now it can't decode anything.

    Code
    2024/03/10 20:28:18 49C59973 r (reader) Reader-0 [nagra cak7] card has no right to decode this channel
    2024/03/10 20:28:18 4DC37B52 c (ecm) mhd (1861@000000/0000/05FB/8F:16F3D7C8ACEED891A5C3A19E252D3003): not found (222 ms) by Reader-0 (lg)

    What does data50 and mod50 means?, you know that?


    Best regards.

  • 024/03/10 20:28:18 49C59973 r (reader) Reader-0 [nagra cak7] card has no right to decode this channel

    There are 2 suggestions:

    1) You need to pay or subscribe to your packages ...

    2) If 1) is OK then you will need a reactivation from the service provider by sending SMS Or call .

    ##

    Use debug 4 log and provide this part:

    ;

  • When I saw that message about the "no rights to decode channels". I though my card was blocked. So I moved to my working Oscam and card still working fine.


    I will give a last try.


    Best regards.

  • I am talking about mipsel oscam

    The 11734 sky icam open normally

    But this 11741 did not open it

  • Hi Samur, can you please check these 2 logs and give me an opinion?


    Log from your build:





    Log from my working server:


    Notice these lines:


    Card have DT05
    Initial AES

    New AES

    EMM Filters.


    Config is the same (plus data50 + mod50 values)


    Best regards.

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!